sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
31,400 Commits 1 Branch 0 Tags 291 MiB
c2c2c4f111
Commit Graph

10516 Commits

Author SHA1 Message Date
Gregory Nutt
c2c2c4f111 drivers/lcd: Make LCD driver configuration indepently selected from NX graphics configuration. This makes things awkward and loses some error checking but is a necessary step in order to make LCD drivers usable when the NX graphics system is disabled. 2017-11-25 13:13:30 -06:00
Gregory Nutt
5c27c0dad4 STM32F4 Discovery: Fix some errors do missing inclusion of stm32_gpio.h 2017-11-25 12:06:22 -06:00
Gregory Nutt
3657723208 drivers/lcd: Add support for external LCD initialization required by some board logic. configs/zpa214xpa: Tried to get the LCD working again unsuccessfully. Too much bit rot I suppose. 2017-11-25 11:41:21 -06:00
Gregory Nutt
776b65bc90 Revert "arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC." 
This reverts commit 88982df09c.
 2017-11-25 09:45:12 -06:00
Gregory Nutt
88982df09c arch/arm/src/xmc4: Serial fix... Cannot use SR1 for RXD. It will not work on this hardware. This means that no more than on UART can be configured per USIC. 2017-11-25 08:19:43 -06:00
Gregory Nutt
b2764a9e4b graphicx/nxmu: nx_server() should be static. 2017-11-25 06:54:13 -06:00
Alan Carvalho de Assis
639f77341a arch/arm/src/xmc4: Remove hard-coded values in clock configuration. USB will be fixed later. 2017-11-25 06:39:44 -06:00
Gregory Nutt
288db5c7b5 configs/xtrs: Removed the XTRS configuration This was an unverified port of NuttX to a TRS-80 simulator. It was removed because (1) it is, as I said, unverified as well as unsupported, and (2) the TRS-80 simulation is a sub-optimal platform. That platform includes a 16-bit ROM image and only a 48Kb RAM space. 2017-11-24 15:21:34 -06:00
Alan Carvalho de Assis
0ac8ac240a arch/arm/src/xmc4: Do not run at 144MHz unless BOARD_FCPU_144MHZ is selected in the board.h header file. 2017-11-24 12:47:47 -06:00
Alan Carvalho de Assis
3931621bde configs/xmc4500-relax: Setup max. freq. 120MHz and setup pull-up to UART RXD pin 2017-11-24 12:31:02 -06:00
Gregory Nutt
168809764f configs: All NX configuration... Because of recent changes to libnx/nxfonts, Supported bit per pixel must be separated specified for NXFONTs too and need to match the select BPP for NX. 2017-11-24 06:33:54 -06:00
Alan Carvalho de Assis
e4fcf00fc5 configs/stm32f4disovery: Add support for JLX12864G display on STM32F4 Discovery board 2017-11-23 08:41:16 -06:00
Anthony Merlino
3be15c0f8f clicker2-stm32: Adds support for USB RNDIS device 2017-11-22 14:03:58 -05:00
Gregory Nutt
af65eac4f2 net/icmp and icmpv6: Fix some errors in debug assertions introduced with last changes in this area. Also updates a REAME.txt file 2017-11-22 11:38:17 -06:00
Gregory Nutt
d1aead1d8c configs/lm3x*/README.txt: Remove some old, redundant, obsolete stuff from some README.txt files. 2017-11-22 06:54:47 -06:00
Alan Carvalho de Assis
389cc49447 configs/stm32f103-minimum: Add framebuffer driver initialization for stm32f103-minimum board 2017-11-22 06:32:36 -06:00
Gregory Nutt
bcc61fed26 Update a README and a misnamed formal parameter. 2017-11-21 09:24:25 -06:00
Miha Vrhovnik
8bb54368c8 Various fixes for errors ound while debugging OTG on L496 
STM32, STM32 L4, and STM32 M4: USB OTGFS DMA trace output fix
STM32: Add dump buffer feature to stm32 F4 series
STM32 and STM32 L4: Fix bad USB OTGFS register address
STM32 L4:  Fix typo in USB OTGFS register usage
STM32 L4:  Add check in USB OTGFS driver to assure that SYSCFG is enabled
Nucleo-L496ZG:  Make HSE on Nucleo-L496ZG default to enable USB
 2017-11-21 06:32:53 -06:00
Gregory Nutt
b9bb2253b6 Update a README. 2017-11-21 06:12:13 -06:00
Gregory Nutt
1fba8ba145 configs/open1788: Enable discrete joystick input. This is sufficient to get through all menuing that does not require text input. 2017-11-20 14:16:01 -06:00
Gregory Nutt
92a9a9b678 configs/open1788: Add support for the discrete joystick driver. Update the pdcurses configuration to use apps/examples/djoystick. 2017-11-20 10:00:52 -06:00
Gregory Nutt
34bae015df Squashed commit of the following: 
libnx/nxfonts:  Cosmetic; reduce amount of debug output.
    configs/open1788/pdcurses:  Add a configuration for testing pdcurses.
 2017-11-19 13:31:04 -06:00
Alan Carvalho de Assis
494d2a486c configs/mcb1700: Add support for Keil MCB1700 board 2017-11-18 10:57:25 -06:00
Gregory Nutt
28de00a90a Changes to allow the font subsystem to be built without enabling the entire graphics system (CONFIG_NX). Adds CONFIG_NXFONTS and CONFIG_NXGLIB. NX and NXFONTS are still pretty heavily entangled 
Squashed commit of the following:

    libnx: Need to duplicate some Kconfig setting for NXFONTs if it can be configured and built independently of NX.  Also includes some build-related fixes.

    configs/sim:  Disable NX graphics support in the fb configuration.

    libnx:  Basic configuration and build changes to support building font support independend of the NX server.
 2017-11-18 10:19:34 -06:00
Bob Feretich
fab5faf097 STM32F7: Completes architecture support for the STM32 F72x and F73x families. Adds support for the Nucleo-144 boards with STM32F722. 2017-11-18 07:55:50 -06:00
Bob Feretich
13b52da3fa stm32 f72xx and f73xx: Add register definition header files and clocking logic 2017-11-17 07:18:02 -06:00
Alan Carvalho de Assis
4f0c4b798f configs/xmc4500-relax: Add config for UART3 on RXD P0.0 and TXD P0.1 pins. 2017-11-16 13:53:01 -06:00
Alan Carvalho de Assis
fcb5129567 arch/arm/src/xmc4: Kconfig was not selecting XMC4_USIC for USIC1. 2017-11-16 13:51:17 -06:00
Gregory Nutt
0649209725 configs/stm3220g-eval/ide: Remove the uVision IDE setup. This has not been used for years and it a maintenance problem for me. 2017-11-16 08:51:49 -06:00
Gregory Nutt
aeab28ef5c configs/stm32f429i-disco/ide: Remove the uVision IDE setup that goes along with the ltdc configuration that was removed on 2017-10-28. 2017-11-16 07:56:30 -06:00
Gregory Nutt
a958349353 STM32F429i-Disco: Convert NxWM configuration to use LTDC framebuffer driver instead of SPI serial. Also reduce number of layers from 4 to 1 in fb configuration. Only one layer is used. 2017-11-15 11:47:14 -06:00
Gregory Nutt
37ca491be6 Build system: Fix CONFIG_BUILD_KERNEL logic directories that have ubin and kbin subdirectories. Conditional logic was fine for CONFIG_BUILD_FLAT and CONFIG_BUILD_PROTECTED but generated useless dependencies if CONFIG_BUILD_KERNEL. 2017-11-15 11:39:30 -06:00
Masayuki Ishikawa
ccc52e70d5 Merged in masayuki2009/nuttx.nuttx/lc823450_built_on_cygwin (pull request #535) 
configs/lc823450-xgevk: Fix compilation errors on Cygwin

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-11-15 11:27:21 +00:00
Gregory Nutt
64bcf3ec94 configs/stm32429i-disco/src: Fix a compile error when CONFIG_BOARD_INITIALIZE is defined. 2017-11-14 16:52:22 -06:00
Gregory Nutt
62b8026976 Remove CONFIG_GRAN_SINGLE. It adds no technical benefit (other than some minor reduction in the number of interface arguments) but adds a lot of code complexity. Better without it. 2017-11-14 11:47:12 -06:00
Gregory Nutt
d99f1ca574 configs/stm32f429-disco/fb: Enable support for the STMPE811 touchscreen controller and also for the apps/exmaples/touchscreen test. 2017-11-14 10:18:03 -06:00
Gregory Nutt
d427872bd6 configs/stm32f429i-disco: Add logic to auto-mount procfs. Enable procfs in all configurations that use NSH. 2017-11-13 16:46:45 -06:00
Gregory Nutt
cd498778bd configs/stm32f429i-disco/: Fix a warning and some C comments. 2017-11-13 16:23:14 -06:00
Gregory Nutt
13b742236d Update some README files. 2017-11-13 15:49:38 -06:00
Gregory Nutt
f3cac38ed6 configs/stm32f429i-disco/fb: Refactor initialization logic so that it is a little more like other boards. Remove double initialization of framebuffer or LCD drivers (whichever is enabled). 2017-11-13 15:10:00 -06:00
Gregory Nutt
2ff9f0e5b1 configs/stm32f429i-disco/fb: Fix a compile issue. Disable all NX features in the fb configuration. NX is not needed. 2017-11-13 14:52:10 -06:00
Gregory Nutt
bf724ddf61 configs/stm32f439i-disco: Add an fb configuration 2017-11-13 14:33:47 -06:00
Gregory Nutt
7b676c8a02 Update README.txt 2017-11-13 09:26:39 -06:00
Alan Carvalho de Assis
7d407fcbd6 Nucleo-F746ZG: Use the serial console over /dev/ttyACM0 by default. The Nucleo-F746ZG doesn't come with Arduio RS-232 shield, then it is better to use the serial over the /dev/ttyACM0 that is created automatically when the board is plugged in the computer. 2017-11-13 09:14:37 -06:00
Gregory Nutt
bfcc8fcbb6 configs/: apps/system/free has been deleted because it violates the portable POSIX OS interface. Remove CONFIG_SYSTEM_FREE=y from all defconfig files. 2017-11-13 08:03:45 -06:00
Masayuki Ishikawa
14e2b6dc5b Merged in masayuki2009/nuttx.nuttx/stm32f4discovery_rndis (pull request #533) 
RNDIS support on STM32F4Discovery

* stm32f4discovery: Add stm32_netinit.c to avoid a compilation error

* stm32f4discovery: Add rndis initialization in stm32_bringup.c

    NOTE: MAC address for the host side starts 0xaa.  This assignment
    scheme should be fixed later.

* stm32f4discovery: Add rndis configuration

    NOTE: STM32F4Discovery + DM-STF4BB

* drivers/usbdev/rndis.c: Fix some issues in rndis.c

    Introduce rndis_transmit() and change rndis_rxdispatch() to avoid
    packet corruption. Introduce max packet size for dual speed which
    is mainly used for high speed mode. Fix adjusting MTU warning
    on Linux host. Fix data corruption if a packet size excceds MTU.

    NOTE: Max packet size is not configured dynamically. This should
    be fixed in the future version.

* stm32f4discovery: Modify #ifdef condition for rndis in stm32_bringup()

* drivers/usbdev/rndis.c: Change HPWORK to ETHWORK

* drivers/usbdev/rndis.c: Merge the commit 07b98ccbb5

    Previous commit b09365784a was based on old rndis.c thus resulted
    in reverting the commit 07b98ccbb5. This change merges the commit.

    NOTE: In the commit 07b98ccbb5, max packet size of bulkout was
    assumed to be 64. In this commit, priv->epbulkout->maxpacket is
    used instead.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-11-13 08:55:41 +00:00
Gregory Nutt
b238ede68f configs/stm32l476-mdk: Repartition bring-up logic so that it is more like other board directories. Add support for USERLED driver. Add bring-up initialization logic for the USERLED driver. 2017-11-12 13:24:13 -06:00
Gregory Nutt
d594d1f56e configs/stm32l476-mdk: Add support for the on-board LEDs. 2017-11-12 12:56:38 -06:00
Gregory Nutt
8b64f8ae49 Update README.txt 2017-11-12 11:41:20 -06:00
Gregory Nutt
5004e8b3ea libc: Add support for readv() and write(). Also includes some cosmetic changes to some unrelated files. 2017-11-11 11:44:14 -06:00