Gregory Nutt
|
c34b5108a7
|
RTC: Fix system time initialization when using an exernal RTC. Fix some bugs in the DS1307/DS3231 RTC driver
|
2015-11-19 14:54:30 -06:00 |
|
Gregory Nutt
|
1c86c004c4
|
FLASH progmem memory MTD: Need to register with PROCFS if enabled
|
2015-11-19 06:57:02 -06:00 |
|
Ken Pettit
|
7b590ec9a2
|
drivers/mtd/smart.c Fixed SmartFS wear level error that occurs when the logical sector size is too small to save all wear level status bytes in a single sector. Logical sectors 1 and 2 were simply not being allocated and then the read_sector and write_sector routines were failing. From Ken Petit
|
2015-11-18 18:12:06 -06:00 |
|
Gregory Nutt
|
622ea95ab1
|
drivers/timers/ds3213.c: Extend to include support for the DS1307 RTC
|
2015-11-18 08:43:19 -06:00 |
|
Ken Pettit
|
f0f7dd9956
|
drivers/mtd/smart.c: Fix a Smart wear-leveling bug. From Ken Petit
|
2015-11-18 07:01:13 -06:00 |
|
Ken Pettit
|
7e58e4c4cf
|
W25: Fix W25 page read/write logic
|
2015-11-18 06:56:53 -06:00 |
|
Gregory Nutt
|
b60422836e
|
Fix some stylistic issues found by tools/nxstyle
|
2015-11-17 17:38:46 -06:00 |
|
Gregory Nutt
|
a654f35d98
|
Fix some stylistic issues found by tools/nxstyle
|
2015-11-17 17:35:17 -06:00 |
|
Gregory Nutt
|
8d963e66cf
|
Fix some stylistic issues found by tools/nxstyle
|
2015-11-17 17:31:57 -06:00 |
|
Gregory Nutt
|
5a99735782
|
(Hopefully) cosmetic changes from review of recent merges for conformance to coding standard
|
2015-11-17 16:54:15 -06:00 |
|
Gregory Nutt
|
25c4ff8285
|
Update some comments
|
2015-11-17 16:29:34 -06:00 |
|
Karim Keddam
|
522d891759
|
Fixed a bug with the ms58xx sensor initialization
|
2015-11-17 17:21:46 -05:00 |
|
Karim Keddam
|
2578994e74
|
Fixed a bug with the CRC for the ms58xx sensor
|
2015-11-17 17:19:11 -05:00 |
|
Gregory Nutt
|
249fa2475b
|
Add logic to detect rollowing while reading or setting the time
|
2015-11-17 14:39:47 -06:00 |
|
Gregory Nutt
|
45530a77d4
|
Add support for DS3231 I2C RTC. Untested on initial commit.
|
2015-11-17 14:07:55 -06:00 |
|
Gregory Nutt
|
e61d51dab3
|
If multiple AT24xx devices are supported and resources are allocated, then it may also be necessary to free those resource
|
2015-11-17 08:39:06 -06:00 |
|
Gregory Nutt
|
f5722bc6dd
|
Merged in slorquet/nuttx/pca9555 (pull request #32)
Pca9555 interrupt support.
|
2015-11-17 07:45:33 -06:00 |
|
Gregory Nutt
|
724901ceb9
|
Add support for multiple AT24xx EEPROM devices
|
2015-11-17 07:40:17 -06:00 |
|
Sebastien Lorquet
|
c7999141e7
|
Merge branch 'master' into pca9555
|
2015-11-17 14:12:03 +01:00 |
|
Sebastien Lorquet
|
826aadbce8
|
Include support for PCA9555 interrupt driven IO changes detection.
Currently using a signal, and a single notified task.
signal handling support moved to generic IO expander header (not pca specific)
|
2015-11-17 14:09:43 +01:00 |
|
Gregory Nutt
|
c955cdccd9
|
Move rivers/wireless/cc3000/security.c to crypto/aes.c; move include/nuttx/wireless/cc3000/security.h to include/nuttx/crypto/aes.h
|
2015-11-16 13:31:02 -06:00 |
|
Gregory Nutt
|
ab9d124528
|
serial: Remove confusing inline functions. Correct attribution for serial DMA logic
|
2015-11-15 08:39:01 -06:00 |
|
Gregory Nutt
|
7f1ac36194
|
Serial driver: Move serial DMA logic to a separate file
|
2015-11-15 07:58:08 -06:00 |
|
Gregory Nutt
|
815ec07b55
|
CAN: A minor improvement to can_txready design
|
2015-11-15 06:36:30 -06:00 |
|
Gregory Nutt
|
5e241cd157
|
CAN Kconfig: Resolve a circular dependency. I am not sure if the correct version foolproof, however
|
2015-11-14 13:36:48 -06:00 |
|
Gregory Nutt
|
81ab270a96
|
CAN driver: Removing call to can_xmit() from can_txready() in a previous commit was a mistake. This commit restores the call to can_xmit(), but does the call in a safer environment on the work thread.
|
2015-11-14 10:33:02 -06:00 |
|
Gregory Nutt
|
015429684f
|
MTD progmem: Fix an address calculation
|
2015-11-13 11:32:34 -06:00 |
|
Sebastien Lorquet
|
8242600e5e
|
WIP for pca9555 irq
|
2015-11-13 16:28:46 +01:00 |
|
Gregory Nutt
|
2706b4f8aa
|
mtd_progmem.c: Fix calculation of block size
|
2015-11-13 09:19:25 -06:00 |
|
Gregory Nutt
|
fdb17620a0
|
Need a prototype for progmem_initialize in include/nuttx/mtd/mtd.h
|
2015-11-12 16:03:24 -06:00 |
|
Max Neklyudov
|
d54a39832a
|
Implement high level DMA infrastructure for serial devices
|
2015-11-12 14:16:19 -06:00 |
|
Gregory Nutt
|
ef59f83a38
|
drivers/mtd/mtd_progmem.c: Add an upper-half driver that can be used with any FLASH library that provides the itnerfaces defined in include/nuttx/progmem.h
|
2015-11-12 13:40:18 -06:00 |
|
Gregory Nutt
|
55686245c1
|
Back out a part of the previous commit
|
2015-11-12 07:53:42 -06:00 |
|
Frank Benkert
|
4a8626d332
|
CAN: Don't disable TX interrupts if the S/W TX FIFO is empty but the hardware supports a H/W TX FIFO
|
2015-11-12 07:46:05 -06:00 |
|
Gregory Nutt
|
9f3edd6373
|
MTD Smart: Remove checks for 64KB erase block size. erasesize was changed to 32-bits in struct mtd_geometry_s
|
2015-11-11 08:25:03 -06:00 |
|
Gregory Nutt
|
2ff1b173f2
|
SmartFS: Backout last change. It alters the behavior when it should not. Obviously there is something that I do not understand
|
2015-11-11 08:15:08 -06:00 |
|
Gregory Nutt
|
08200d8f86
|
S24FL1: Fix so that the driver compiles with 512 byte block support
|
2015-11-10 13:34:33 -06:00 |
|
Gregory Nutt
|
eb1191df63
|
S24FL1: Fix an error in the page write logic
|
2015-11-10 12:48:29 -06:00 |
|
Gregory Nutt
|
965addb397
|
s25fl1: When unprotecting, handle case where protection bits are inverted. Add option to s25flinitilize() to unprotected on power up
|
2015-11-10 11:33:35 -06:00 |
|
Gregory Nutt
|
1ed69cd535
|
Fix another corner case in the upper half CAN driver
|
2015-11-10 07:41:40 -06:00 |
|
Gregory Nutt
|
896834002a
|
BCH driver should forward ioctl commands to the contained block driver
|
2015-11-09 11:47:25 -06:00 |
|
Gregory Nutt
|
2ab0832c26
|
Smart MTD: fix some outdated logic: geometray erase size is now 32-bits
|
2015-11-09 09:35:14 -06:00 |
|
Gregory Nutt
|
95562f8a86
|
CAN driver: More improved comments
|
2015-11-08 07:43:57 -06:00 |
|
Gregory Nutt
|
874862abb9
|
CAN driver: Improve some comments
|
2015-11-08 07:00:09 -06:00 |
|
Gregory Nutt
|
91429433f6
|
Correct naming of Spansion part. S25FL1, not ST25FL1
|
2015-11-07 11:51:09 -06:00 |
|
Gregory Nutt
|
b2bdba0824
|
S25FL1 FLASH driver: Fix return value from the bwrite() method
|
2015-11-07 11:26:53 -06:00 |
|
Gregory Nutt
|
bfeef77f1f
|
SmartFS: Fix a compile error when FS debug enabled. Plus some changes needed by NuttX coding standard
|
2015-11-05 11:25:39 -06:00 |
|
Gregory Nutt
|
a314b2ac11
|
ST25FL1: Fix error that was overwriting status
|
2015-11-05 10:38:47 -06:00 |
|
Paul A. Patience
|
b5a77b9403
|
RAMLOG: Fix forgotten FARs
|
2015-11-05 10:38:42 -05:00 |
|
Gregory Nutt
|
c6fc285277
|
CAN: Add a new CAN upper-half interface, can_txready(), that can be used to break deadlock conditions in certain CAN hardware that supports queuing of TX messages
|
2015-11-03 10:52:58 -06:00 |
|