sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
25,892 Commits 1 Branch 0 Tags 291 MiB
c4e6f50eac
Commit Graph

2588 Commits

Author SHA1 Message Date
Gregory Nutt
c4e6f50eac Centralize definitions associated with CONFIG_DEBUG_IRQ 2016-06-15 08:35:22 -06:00
Gregory Nutt
58a0fa8a1e Trivial spacing changes from review of last PR 2016-06-14 16:41:10 -06:00
Gregory Nutt
0da02686e6 Merged in K-man23/nuttx/ncp5623c (pull request #57) 
Forgot to add the header file for the ncp5623c driver
 2016-06-14 16:35:54 -06:00
Konstantin Berezenko
ec455a8f4c Forgot to add the header file for the ncp5623c driver 2016-06-14 15:16:10 -07:00
Frank Benkert
573b1d415c * SAMV7: SPI: SPI-Freq. 40MHz; VARSELECT; hw-features 
This change adds the following improvements:
  - Increase the allowed SPI-Frequency from 20 to 40 MHz.
  - Correct and rename the "VARSELECT" option This option was included in the code as "CONFIG_SPI_VARSELECT" but nowhere  defined in a Kconfig file. The patch renames it to "CONFIG_SAMV7_SPI_VARSELECT" and corrects the implementation according the datasheet of Atmel. In short, this option switches the processor from "fixed peripheral selection" (single device) to "variable peripheral selection" (multiple devices on the bus).
  - Add a new Function to the interface to control the timing and delays of the chip according the ChipSelect lines. This function can control the delay between the assertion of the ChipSelect and the first bit, between the last bit and the de-assertion of the ChipSelect and between two ChipSelects. This is needed to tune the transfer according the specification of the connected devices.
  - Add three "hw-features" for the SAMV7, which controls the behavior of the ChipSelect:
    1. force CS inactive after transfer: this forces a (short) de-assertion of the CS after a transfer, even if more data is
      available in time
    2. force CS active after transfer: this forces the CS to stay active after a transfer, even if the chip runs out of data. Btw.: this is a prerequisit to make the LASTXFER bit working at all.
    - escape LASTXFER: this suppresses the LASTXFER bit at the end of the  next transfer. The "escape"-Flag is reset automatically.
 2016-06-14 13:12:16 -06:00
Gregory Nutt
a98bc05f65 New debug macro: alert(). This is high priority, unconditional output and is used to simplify and stanardize crash error reporting. 2016-06-14 09:07:53 -06:00
Gregory Nutt
5073bf1de6 Update some comments 2016-06-13 07:02:45 -06:00
Gregory Nutt
f3ec664f63 Debug output level (error, warning, info) is now selectable on a per-subsystem, per-driver basis 2016-06-12 13:08:23 -06:00
Paul A. Patience
f995f3c7bf assert: Simplify 2016-06-12 08:18:30 -04:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
86b79b33cf Reserver the name 'err' for other purposes 2016-06-11 14:40:07 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
c211ce8be1 DEBUGASSERT() is not enabled with CONFIG_DEBUG_ASSERTIONS, not CONFIG_DEBUG 2016-06-11 12:49:21 -06:00
Gregory Nutt
a3bb764305 Add support for a warn() marco that will be between dbg() and info() in priority 2016-06-11 12:38:37 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
9c4b604074 Button upper half driver: Add definitions needed for compilation with the poll() interface is not disabled. 2016-06-11 07:22:31 -06:00
Paul A. Patience
5cfffbfa62 crc64: fix error 2016-06-10 12:30:45 -04:00
Paul A. Patience
9587c551ad libc/misc: add crc64 2016-06-10 11:03:50 -04:00
Gregory Nutt
03c44c3583 Merged in marten_svanfeldt/nuttx-public/for_upstream/is25 (pull request #44) 
Added driver of IS25xP SPI flash devices
 2016-06-09 09:30:34 -06:00
Marten Svanfeldt
edeb2eed4e Added driver of IS25xP SPI flash devices 
Based on sst25xx driver

Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2016-06-09 05:13:06 +02:00
Gregory Nutt
d84dbbc455 Add a comment to assert.h 2016-06-08 09:59:11 -06:00
Paul A. Patience
79a157cc9d assert: Check if NDEBUG is defined 2016-06-08 11:07:24 -04:00
Aleksandr Vyhovanec
c939bbe47a include/signal.h: Change type of SIG_IGN and related defines to _sa_handler_t 2016-06-07 06:56:19 -06:00
Gregory Nutt
37dd4e52a1 boardctl.h needs to be include-able from C++ files 2016-06-05 12:14:34 -06:00
Gregory Nutt
a18dbfda6e Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call. 2016-06-02 10:44:13 -06:00
Gregory Nutt
50d640a102 Typo fix 2016-05-30 09:51:46 -06:00
Gregory Nutt
9b4cec9228 Replace confusing references to uIP with just 'the network' 2016-05-30 09:51:15 -06:00
Gregory Nutt
22044edd12 Merged in ziggurat29/nuttx/stm32l4_i2c_lcd_mjkdz_001 (pull request #35) 
correct bugs and add enhancements to pcf8574 lcd backpack driver
 2016-05-29 14:02:39 -06:00
ziggurat29
4643fcdfd8 correct logic hazard in latch and load nybble; was transitioning control lines at the same time as enable, causing spurious behaviour on less-tolerant displays 
improve timing parameters in init sequences for better display compatibility

correct (row,col) -> address calculation; affects 4-line displays

update comments in header and readme
 2016-05-29 11:09:00 -05:00
Gregory Nutt
7d538d19bf Costmetic changes to comments and style 2016-05-27 10:53:27 -06:00
Gregory Nutt
23f4f04448 Costmetic update to some comments 2016-05-27 07:50:06 -06:00
Pierre-noel Bouteville
55d704e3c2 ADC: In adc.h, exclude upper half fields if common upper half is not used (CONFIG_ADC not defined). 2016-05-27 07:16:30 -06:00
Pierre-noel Bouteville
41412d0ce9 * fix a bug in crc computation for ms583730 
* implement POSIX read.
 2016-05-27 07:05:20 -06:00
Gregory Nutt
b630d48175 Add bind method to the ADC lower-half interface 2016-05-26 11:32:26 -06:00
Gregory Nutt
001715d57b FS: Add logic to detach a file structure from a file descriptor. This is for use only within the OS. It permits an open file or driver to be used across multiple threads. 2016-05-26 09:41:50 -06:00
Gregory Nutt
aa7a981674 Update some comments 2016-05-26 08:37:40 -06:00
Gregory Nutt
3603dc6218 1-wire: Initialization/uninitialization functions are not use MCU-independent up_ naming. Should use STM32-specific stm32_ naming. These are not globally accessible but only accessible from STM32 board logic. 2016-05-25 17:56:47 -06:00
Aleksandr Vyhovanec
9a2002a302 1-wire driver based on U[S]ART in single-wire, half-duplex mode. 2016-05-25 08:59:47 -06:00
Gregory Nutt
51504a032e Oops... forgot to add PCF8574 LCD Backpack files before doing the commit. 2016-05-25 08:48:54 -06:00
Gregory Nutt
4b3e710af6 Add an argument to board_app_initialize() 2016-05-24 10:51:22 -06:00
Alexander Vasiljev
eb11e662db Modifications to the crypto API needed for LPC43xx. 2016-05-23 08:05:02 -06:00
Gregory Nutt
8ace1e3be2 Remove all implementatinos of up_wdginitialize(). It is no longer used. 2016-05-18 19:48:42 -06:00
Gregory Nutt
32838fcc2c enter/leave_critical_section: In SMP configuration, may attempt to access the task lists before they have been initialized 2016-05-18 09:17:01 -06:00
Gregory Nutt
a3f3cc12c0 Update some comments; Fix grammatic error in ChangeLog. 2016-05-13 17:36:08 -06:00
Gregory Nutt
faca2fb1e7 ARMv7-A/i.MX6: Add logic to handle allocation of CPU IDLE thread stacks more efficiently 2016-05-13 11:39:42 -06:00
Gregory Nutt
70782b0f14 ARMv7-A i.MX6: More SMP logic. Still untested. 2016-05-12 15:04:46 -06:00
Frank Benkert
9eeb8634fc Improve the CAN error reporting by also report internal device driver errors. 2016-05-11 07:10:17 -06:00
Sebastien Lorquet
f4fa4799f7 Add a driver for SST26F spi/qspi flash devices (SPI mode only) 2016-05-10 11:09:15 -06:00