sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
54,889 Commits 1 Branch 0 Tags 291 MiB
c5f816e16a
Commit Graph

234 Commits

Author SHA1 Message Date
David Sidrane
4d760c5ea4 semaphore:sem_holder add DEBUGASSERT s 2017-03-13 10:46:26 -10:00
Gregory Nutt
399f306744 A few cosmetic changes 2017-03-11 08:58:42 -06:00
David Sidrane
6cc8f9100b Priority Inversion fixes:typo 2017-03-10 06:37:46 -10:00
Gregory Nutt
360539afac Priority inheritance: When CONFIG_SEM_PREALLOCHOLDERS==0, there is only a single, hard-allocated holder structure. This is problem because in sem_wait() the holder is released, but needs to remain in the holder container until sem_restorebaseprio() is called. The call to sem_restorebaseprio() must be one of the last things the sem_wait() does because it can cause the task to be suspended. If in sem_wait(), a new task gets the semaphore count then it will fail to allocate the holder and will not participate in priority inheritance. This fix is to add two hard-allocated holders in the sem_t structure: One of the old holder and one for the new holder. 2017-03-10 09:30:15 -06:00
Gregory Nutt
a93e46d00c Cosmetic 2017-03-10 08:54:50 -06:00
Gregory Nutt
74189d84e2 Cancellation points: Fix some backward logic in conditional compilation. 2017-02-02 06:42:41 -06:00
Gregory Nutt
cfb876263a SMP: There were certain conditions that we must avoid by preventing releasing the pending tasks while withn a critical section. But this logic was incomplete; there was no logic to prevent other CPUs from adding new, running tasks while on CPU is in a critical section. 
This commit corrects this.  This is matching logic in sched_addreadytorun to avoid starting new tasks within the critical section (unless the CPU is the holder of the lock).  The holder of the IRQ lock must be permitted to do whatever it needs to do.
 2016-12-27 08:49:07 -06:00
Gregory Nutt
6997cda1b5 Grrr... cloned typos! 2016-12-10 09:45:55 -06:00
Gregory Nutt
842ec7e612 ifdef out some non-reachable code 2016-12-10 09:43:04 -06:00
Gregory Nutt
b52e4e5ecd Move cancellation point definitions to their own header file. 2016-12-10 09:08:26 -06:00
Gregory Nutt
bc3ca25cc7 Cancellation points: Close up some logic to eliminte some race conditions. 2016-12-10 08:36:58 -06:00
Gregory Nutt
7fce8022c6 Finishes all cancellation point logic 2016-12-09 16:50:34 -06:00
Gregory Nutt
c9ca97b4b5 cancellation points are basically function. More tested is needed and additional cancellation points must be implemented before this can be merged back to master. 2016-12-09 12:01:18 -06:00
Gregory Nutt
018db84567 Flesh out more cancellation point logic. 2016-12-09 10:31:40 -06:00
Gregory Nutt
00215fbc98 sched_note: Add spinlock instrumentation; In SMP configurations, select to log only notes from certain CPUs 2016-11-28 10:33:46 -06:00
Gregory Nutt
e3fe320e08 SMP: Add support for linking spinlocks into a special, non-cached memory region. 2016-11-26 08:47:03 -06:00
Gregory Nutt
bac7153609 SMP: Add logic to avoid a deadlock condition when CPU1 is hung waiting for g_cpu_irqlock and CPU0 is waitin for g_cpu_paused 2016-11-22 11:34:16 -06:00
Gregory Nutt
558784d06f Spinlocks: Added capability to provide architecture-specific memory barriers. This was for i.MX6 but does not help with the SMP problems. It is still a good feature. 2016-11-21 11:55:59 -06:00
Freddie Chopin
484a1b6104 sem_wait() and sem_trywait() no longer modify the errno value UNLESS an error occurs. This allows these functions to be used internallly without clobbering the errno value. 2016-11-09 07:01:49 -06:00
Gregory Nutt
6f1c5e7b43 Add some comments. 2016-11-05 09:44:29 -06:00
Gregory Nutt
4b0372e542 Missing # on endif 2016-11-03 21:27:52 -06:00
Gregory Nutt
73fc186beb sem_setprotocol: Handle a case of missing proxy for sem_setprotocol. Reorder so that (1) this error is avoided, and (2) >No proxy is needed if priority inheritance is not enabled. 2016-11-03 18:51:38 -06:00
Gregory Nutt
4c8ec0d2ca include/nuttx/semaphore.h: Fix broken macros 2016-11-03 12:49:44 -06:00
Gregory Nutt
97bf82ee05 Semaphores: Provide macros for sem_setprotobol() and sem_getprotocol() if priority inheritance is not enabled. More SEM_PRIO_* definitions to include/nuttx/semaphore.h 2016-11-02 18:21:46 -06:00
Gregory Nutt
d5b4d848d3 Move protoypes for the non-standard include/semaphore.h file to the non-standard include/nuttx/semaphore.h with the other non-standard semaphore interfaces. 2016-11-02 14:43:03 -06:00
Gregory Nutt
b738a646ad sem_getprotocol() can be in C library 2016-11-02 09:29:16 -06:00
Gregory Nutt
92d3022411 Add pthread_mutexattr_get/set_protocol and non-standard sem_get/set_protocol. These may use to enable or disable priority inheritance on a single semaphore. 2016-11-02 09:05:18 -06:00
Gregory Nutt
3e13ed2400 Within the OS, when a thread obtains a semaphore count it must call sem_addholder() if CONFIG_PRIORITY_INHERITANCE is enabled. If a count is available, then sem_wait() calls sem_addholder(), otherwise it waited for the semaphore and called sem_addholder() when it eventually received the count. 
This caused a problem when the thread calling sem_wait() was very low priority.  When it received the count, there may be higher priority threads "hogging" the CPU that prevent the lower priority task from running and, as a result, the sem_addholder() may be delayed indefinitely.

The fix was to have sem_post() call sem_addholder() just before restarting the thread waiting for the semaphore count.

This problem was noted by Benix Vincent who also suggested the solution.
 2016-10-26 07:23:15 -06:00
Paul A. Patience
891113dac9 sched/semaphore: Fix setting EINVAL in sem_post() and sem_wait() 2016-06-28 10:15:52 -04:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
13cac3b592 sched/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 16:42:42 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
9b5e88af71 Update some comments 2016-03-06 13:50:26 -06:00
Gregory Nutt
5d63cd85c7 sched/semaphore: Add an internal interface to reset a semaphore count. 2016-03-05 07:33:24 -06:00
Gregory Nutt
72d3920295 Rename cpuset_t to cpu_set_t which is the type used in some non-standard Linux/GNU interfaces. Move definitions of cpu_set_t to include/sys/types.h. Add prototypes for sched_setaffinity(), sched_getaffinity(), pthread_attr_setaffinity_np(), pthread_attr_getaffinity_np(), pthread_setaffinity_np(), and pthread_getaffinity_np(). No implementation is yet in place. 2016-02-19 15:57:07 -06:00
Gregory Nutt
6543c570d4 Remove some empty file section section header comments 2016-02-17 17:38:39 -06:00
Gregory Nutt
b50325bb38 SMP: Add funtions to perform atomic bit set/clear operations; fix two errors in SMP macros 2016-02-17 13:20:01 -06:00
Gregory Nutt
a442245479 SMP: Fix some non-SMP errors that crept in; fix a recursion problem; re-partition some functionality to improve design and readability 2016-02-16 10:14:33 -06:00
Gregory Nutt
9cb2a6b1f9 Rename irqsave() and irqrestore() to up_irq_save() and up_irq_restore() 2016-02-14 16:19:15 -06:00
Gregory Nutt
6e3107650d nuttx/sched: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 08:17:46 -06:00
Gregory Nutt
97cbd7112f SMP: Implement enter/leave_critical_section 2016-02-13 10:23:16 -06:00
Gregory Nutt
3f7f58de9d SMP: Fix some debug assertion problems when DEBUG is enabled; Partial fix for one bring-up issue 2016-02-12 17:13:38 -06:00
Gregory Nutt
85f663a8ee SMP: Add non-reentrant spinlocks, fix pre-emption controls with SMP, and most of the basic scheduler support for SMP (still missing a few things) 2016-02-12 14:55:31 -06:00
Gregory Nutt
3147dfc7d5 SMP: Add some tentative initialization logic 2016-02-10 13:49:27 -06:00
Gregory Nutt
f5a3b1e89d Add EXPERIMENTAL configuration option to investigate some SMP issues 2016-02-10 10:27:48 -06:00
Gregory Nutt
bf8120d51d Fix some odd logic in CC3000 semaphore handling. Noted by Vladimir Komendantskiy 2016-02-10 09:50:28 -06:00
Gregory Nutt
2c0ad2564f Add CONFIG_SPINLOCK. Also need spinunlock() and spinlock_initialize() 2016-02-09 15:31:14 -06:00
Gregory Nutt
74db48202e sched/: Replace explict references to g_readytorun with indirect references via the this_task() macro 2016-02-06 17:44:41 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
b90da3f27b waitpid: CRITICAL BUGFIX. Add a reference counting mechansim to prevent wait from using stale memory that was freed by the exiting task 2015-12-22 11:48:17 -06:00
Gregory Nutt
79d554939e sched/: Fix some spacing issues 2015-10-07 19:59:14 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Paul A. Patience
9f108b7b63 Fix issues detected by clang 2015-09-10 20:59:43 -04:00
Sebastien Lorquet
89c81f6c08 FIX typo in DEBUASSERTion 2015-08-03 09:14:15 -06:00
Gregory Nutt
15db2a45a4 drivers/net/slip.c: Fix another compilation error 2015-08-02 07:20:36 -06:00
Gregory Nutt
3a109315ed Fix a logic error in last change to sem_tickwait() 2015-08-01 16:00:23 -06:00
Gregory Nutt
ffec6124f2 Add a start time to sem_tickwait() to account for any elapsed time before the timer is actually started 2015-08-01 14:57:31 -06:00
Gregory Nutt
12cbe147a0 Forget to add files before last commit 2015-08-01 07:34:27 -06:00
Gregory Nutt
2c66e0eb2a sem_tickwait(): Add a new, non-standard function to perform timed semaphore waits. It is functionally equialent to the standard sem_timedwait(), but more efficient for use in higher performance device drivers. Requested by Max Neklyudov 2015-08-01 07:31:09 -06:00
Gregory Nutt
3adcae8ffb Update the type passed to watchdog timer handlers. Using uint32_t is a problem for 64-bit machines. 2015-05-18 08:53:42 -06:00
Gregory Nutt
071658bb6d Another missing semicolon 2015-04-23 07:18:59 -06:00
Gregory Nutt
093a144934 sem_wait(): Missing comma on debug statement caused compile error with DEBUG on. Why hasn't that been noted before? 2015-04-23 07:15:55 -06:00
Gregory Nutt
b4423c1eed Make some file section headers more consistent with standard 2015-04-08 06:47:36 -06:00
Gregory Nutt
127951e029 Fix places where the errno value was being overwritten by subsequent actions so that the returned errno value was incorrect. From Max Neklyudov. 2015-02-25 07:45:04 -06:00
Gregory Nutt
cded7ea682 Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00
Gregory Nutt
826f5516ff Semaphores: sem_waitirq.c must be built when signals are disabled. That is because not handles not only the case of semaphore wait being awakened by a signal, but also the case with sem_timedwait.c when the semaphore wait is awakened by a timeout. 2014-12-28 15:03:12 -06:00
Gregory Nutt
78b755961f Semahores: Remove a warning with SIGNALS are disabled 2014-12-28 14:54:40 -06:00
Gregory Nutt
b3a1939020 Sempahores: Add logic to clean up after task_delete() or pthread_cancel() if the task happens to be waiting on a semaphore when it is cancelled 2014-12-13 12:02:25 -06:00
Gregory Nutt
fcc2a1bb4b Fix incorrect comment 2014-11-07 15:54:24 -06:00
Gregory Nutt
322f9f401c Simplify how C source files are selected in the build 2014-10-07 07:42:36 -06:00
Gregory Nutt
38ddbc774f Cosmetic change to comments 2014-10-06 18:03:01 -06:00
Gregory Nutt
8c958be5ab Semaphore initialization is now only required if priority inheritance is initialized 2014-09-29 06:50:48 -06:00
Gregory Nutt
650a0d0615 Completes VFS-based named semaphore implemetation. Still a little buggy 2014-09-28 15:58:56 -06:00
Gregory Nutt
a41c1de32c Add basic data structures that will allow us to move named semaphore support out of the OS and into the VFS (not complete). 2014-09-28 10:15:33 -06:00
Gregory Nutt
1780810d3d Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
Gregory Nutt
0ab1b0de25 nuttx/sched: Remove explicit references to errno. That is a problem from within the kernel for certain configurations 2014-08-28 17:00:24 -06:00
Gregory Nutt
ad9b3f8ab8 wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
Gregory Nutt
e1769b22f1 Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
Gregory Nutt
d798dd37a7 Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
Gregory Nutt
d4b56eb3cc Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
Gregory Nutt
0f318e9249 Move watchdog functions from sched/ to sched/wdog 2014-08-08 14:21:48 -06:00
Gregory Nutt
e10a23ae50 Move environment files from sched/ to sched/environ 2014-08-08 13:53:29 -06:00