since these function don't depend on standard input/output function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I011a387a1e2c1360e8f37716d512bd32f93ad467
Summary:
- This commit adds SMP support to cxd56_farapi.c
- nxplayer now works in SMP mode
Impact:
- Spresense in SMP mode only
Testing:
- Add the following configs to spresense:wifi
- +CONFIG_SCHED_INSTRUMENTATION=yy
- +CONFIG_SCHED_INSTRUMENTATION_BUFFER=y
- +CONFIG_SMP=y
- +CONFIG_SMP_NCPUS=2
- +CONFIG_SPINLOCK_IRQ=y
- Run nxplayer and play an WAV file on uSD card
- NOTE: http streaming playback would cause deadlocks
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Fixes:
##[error]net/tun.c:837:13: error: conflicting types for 'tun_poll_expiry'
837 | static void tun_poll_expiry(FAR void *arg)
| ^~~~~~~~~~~~~~~
net/tun.c:196:13: note: previous declaration of 'tun_poll_expiry' was here
196 | static void tun_poll_expiry(wdparm_t arg);
| ^~~~~~~~~~~~~~~
And
##[error]net/tun.c:881:57: error: passing argument 4 of 'wd_start' makes integer from pointer without a cast [-Werror=int-conversion]
881 | wd_start(&priv->txpoll, TUN_WDDELAY, tun_poll_expiry, priv);
| ^~~~
| |
| struct tun_device_s *
In file included from /github/workspace/sources/nuttx/include/nuttx/sched.h:41,
from /github/workspace/sources/nuttx/include/sched.h:34,
from /github/workspace/sources/nuttx/include/nuttx/arch.h:81,
from net/tun.c:60:
/github/workspace/sources/nuttx/include/nuttx/wdog.h:134:42: note: expected 'wdparm_t' {aka 'long unsigned int'} but argument is of type 'struct tun_device_s *'
134 | wdentry_t wdentry, wdparm_t arg);
| ~~~~~~~~~^~~
And
chip/cxd56_rtc.c: In function 'up_rtc_initialize':
##[error]chip/cxd56_rtc.c:358:3: error: too many arguments to function 'cxd56_rtc_initialize'
358 | cxd56_rtc_initialize(1, NULL);
| ^~~~~~~~~~~~~~~~~~~~
chip/cxd56_rtc.c:253:13: note: declared here
253 | static void cxd56_rtc_initialize(wdparm_t arg)
| ^~~~~~~~~~~~~~~~~~~~
boards: metro-m4 Add support for starting the watchdog timer on the metro-m4.
Testing:
- Build check only
Signed-off-by: Leomar Mateus Radke <leomar@falker.com.br>
sam_ili9488.c:1605:7: error: label 'errout_with_dmadog' used but not defined
bcmf_sdio.c:855:16: error: passing argument 1 of 'wd_start' from incompatible pointer type
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
This will resolve numerous problems with the way that hard links, in particular "." and ".." are handled. Instead of trying to fudge the stat flags, the correct implementation is to follow the hard link to the final link target node. That is what must determine the attributes of the directory entry.
Summary:
- This commit is a workaround to avoid errors in gs2200m_send_cmd()
- See the actual sequence in Testing for details
Impact:
- gs2200m driver
Testing:
- Test with spresense:wifi
- 1-1 Run tcpclient on NuttX and run nc on Linux
- 1-2 Stop nc on Linux then tcpclient also stops
- 1-3 Run tcpclient then the first AT+NCTCP will fail
- 1-4 But the second AT+NCTCP will succeed
- 2-1 Run tcpclient on NuttX and run nc on Linux
- 2-2 Stop nc on Linux then tcpclient also stops
- 2-3 Run tcpserver then the first AT+NSTCP will fail
- 2-4 But the second AT+NSTCP will succeed
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Interrups were blocked 1*n/baud Seconds. The former comment indicates
there was an asumption that the TXE would be set at DMA completion.
In reality this is not true. There can be 1 char in the TX Shift
register and one in the TX holding register, when DMA completes.
Waiting on TXE is not needed at all. The DMA will resume on the
DMA req when the TX holding register is written to the TX Shift
register.
This PR corrects an error in the ROMFS file system. The error occurred after following a hard link (depending on how the ROMFS image is organized). The error occurred because some of the information buffered before following the links was stale and, hence, out of sync after following the hard link. This would cause random errors when paths containing hardlinks were used with ROMFS.
This PR resolves Issue #1543. Please compare the following output with the output in Issue #1543 to see how the problem was resolved:
NuttShell (NSH) NuttX-9.1.0
nsh> mount
/etc type romfs
/proc type procfs
/tmp type vfat
nsh> ls -Rl /etc
/etc:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 20 group
dr-xr-xr-x 0 init.d/
-r-xr-xr-x 35 passwd
/etc/init.d:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 71 rcS
nsh> ls -l /etc/init.d
/etc/init.d:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 71 rcS
nsh> ls -l /etc/init.d/.
/etc/init.d/.:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 71 rcS
nsh> ls -l /etc/init.d/..
/etc/init.d/..:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 20 group
dr-xr-xr-x 0 init.d/
-r-xr-xr-x 35 passwd
nsh> ls -l /etc/init.d/../.
/etc/init.d/../.:
dr-xr-xr-x 0 .
dr-xr-xr-x 0 ..
-r-xr-xr-x 20 group
dr-xr-xr-x 0 init.d/
-r-xr-xr-x 35 passwd
nsh>
In the commit
612acb9d93
the CONFIG_PREALLOC_MQ_MSGS is set by default to 4 and should be removed from defconfig.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
so size with nuttx could report the correct bss value:
text data bss dec hex filename
155467 1464 1948 158879 26c9f nuttx
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I7e9ec4d09d14b6f15b235b4b46ebdd98986d9750
1.Expose the notification through fb_vtable_s::updatearea
2.Incorporate old nx_notify_rectangle into the new updatearea callback
3.Migrate the calle of nx_notify_rectangle to fb_vtable_s::updatearea
Change-Id: Ia3d1f73e8757b2d381586d76ec6adc16c810018d
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Change the preallocated message and descriptor from 32/24 to 4.
The total size is reduce from 1892 to 532
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I79d199465daef678986868f773876289859f42fc
1.Don't preallocate sigaction list since it's used only in the task context
2.Reduce the preserved item which is used only in the task context from 16 to 4
The total memory decrease from 1280B to 480B
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib5d5a7365c7d443fc0e99c0d3ea943e85f67ca8c
