Commit Graph

6181 Commits

Author SHA1 Message Date
Gregory Nutt
9a9fc90794 SAMA5 UDPHS: Dont' reject read request submissions while stalled. That causes an infinite loop. When stalling, cancel all pending write requests, but cancel only a reqd request if it is in progress. It will be immediately requeued 2013-09-24 15:06:17 -06:00
Gregory Nutt
446ced4799 Comment out assertion that apparently fires inappropriately 2013-09-24 15:01:25 -06:00
Gregory Nutt
2de3781ebf Slightly improved debug output 2013-09-24 13:47:03 -06:00
Gregory Nutt
0b998887f4 SAMA5D3x-EK: Enable the interrupt stack in in all configurations 2013-09-24 13:46:14 -06:00
Gregory Nutt
5d192f72e3 Stack monitor fixes 2013-09-24 12:14:52 -06:00
Gregory Nutt
a72fb7dc89 Stack monitor fixes 2013-09-24 12:13:53 -06:00
Gregory Nutt
7affa54e7e Standardize stack checking interface 2013-09-24 11:45:13 -06:00
Gregory Nutt
368867f06e ENCx24J600 UDP backlog support from Maz Holtzberg 2013-09-24 09:03:16 -06:00
Gregory Nutt
9bb771b8b8 SAMA5 UDPHS: Minor clean-up of STALL logic 2013-09-23 18:10:41 -06:00
Gregory Nutt
c68c0cb268 SAMA5 HSMCI: Disable TX DMA. it is not reliable 2013-09-23 13:54:32 -06:00
Gregory Nutt
a1220e3440 SAMA5 HSMCI DMA clean-up. There are still some issues 2013-09-23 11:25:39 -06:00
Gregory Nutt
8f57ee9e07 ZKIT-ARM-1769: LED1 is now user controllable. From Rashid Fatah 2013-09-23 07:47:56 -06:00
Gregory Nutt
773a693ee2 Cosmetic changes to comments and coding style fixes 2013-09-22 14:48:22 -06:00
Gregory Nutt
cf5cf0da72 SAMA5D3x-EK AT25 Serial FLASH: Dropping SPI frequency to 10MHz gives more reliable behavior 2013-09-22 12:22:55 -06:00
Gregory Nutt
f22e60c392 Use a valid interval for the interrupt endpoint in the CDC/ACM driver 2013-09-22 11:35:44 -06:00
Gregory Nutt
8a1e33cb10 Un-neccesary, cosmetic changes to label names and comments 2013-09-22 08:54:06 -06:00
Gregory Nutt
3ceac07042 SAMA5 OHCI: Back out a change, the real root cause was a bug in the cache logic so the hack is no longer necessary 2013-09-22 07:53:51 -06:00
Gregory Nutt
9cb23c5ccb ARMv7-A: Fix some error in alignment to cache line boundaries in the cache operations 2013-09-21 15:47:00 -06:00
Gregory Nutt
0ad20e4918 Fix minor typos in README file 2013-09-21 15:38:11 -06:00
Gregory Nutt
d31d809bbf SAMA5 OHCI: Fix some strange Dcache problems that I still don't understand; end address on cache operations is end+1, not end 2013-09-21 12:21:10 -06:00
Gregory Nutt
9b22dafd5f SAMA5D3x-EK: Always use UPLL for USB clocking 2013-09-21 12:20:11 -06:00
Gregory Nutt
5b17e9da79 Cosmetic changes to USB host class driver files 2013-09-21 12:19:12 -06:00
Gregory Nutt
c900c580ae ARMv7-A: Clarify end address paramet in cache operations: It is the end+1 address, not the end address 2013-09-21 12:16:34 -06:00
Gregory Nutt
60bd791dec SAMA5 + HID Keyboard. Fixes to initialize the HID keyboard class 2013-09-20 15:23:00 -06:00
Gregory Nutt
34804c8ee7 SAMA5 OHCI: Fix some problems with D-Cache coherency and physical addressing related to interrupt endpoints 2013-09-20 15:22:09 -06:00
Gregory Nutt
ad1d9d2a44 Several usability improvements the SAMA5D3x-EK configurations 2013-09-20 12:37:36 -06:00
Gregory Nutt
5d0131fc73 Names of some USB device definitions changed to avoid collisions 2013-09-20 10:00:30 -06:00
Gregory Nutt
dbf07d6d01 SAMA5 OHCI: When UPLL drives OHCI the logically correct divider of 10 does not work; But a divider of 5 does. Why? 2013-09-19 16:10:46 -06:00
Gregory Nutt
92617fade5 SAMA5 EHCI: Fix bits being clobbered in PORTSC on hand-off to OHCI. OHCI: Fix some more trace configuration issues. Both: Don't muck with SFR port selection bits once they have been initialized 2013-09-19 10:52:33 -06:00
Gregory Nutt
1600e02962 More USB host trace conditional compilation problems 2013-09-19 09:08:55 -06:00
Gregory Nutt
ac3dfce614 Fix inconsistency in USB host tracing definitions 2013-09-19 08:46:33 -06:00
Gregory Nutt
db9d3dfce6 Ran make oldconfig on the SAMA5 NSH configuration 2013-09-18 13:52:37 -06:00
Gregory Nutt
0c62e5797e SAMA5: Add support for the FPU OS test 2013-09-18 10:35:03 -06:00
Gregory Nutt
8f88387712 LPC17xx SPI: Remove an unused static prototype that caused a compile time warning 2013-09-17 17:14:08 -06:00
Gregory Nutt
26009bf8bb A consequence of previous change: Configurations that select a PHY also need to set CONFIG_NETDEVICES or PHY configuration will be lost on the next reconfiguration 2013-09-17 17:13:20 -06:00
Gregory Nutt
5ee2ab3a72 Zkit-ARM-1868: MMC/SD is on SPI, not SSP0. From Rashid Fatah 2013-09-17 17:08:46 -06:00
Gregory Nutt
14ac82c11c SAMA5 EMAC: Changes from early debug sessions. Still a way to go 2013-09-17 15:52:19 -06:00
Gregory Nutt
226839692d SAMA5 EMAC: Resolve issues with DUAL PHY support needed for both EMAC and GMAC peripherals. EMAC driver is now code complete and builds without complaint 2013-09-17 10:55:13 -06:00
Gregory Nutt
fd3e1e0802 Add definitions for the Micrel KSZ8051 PHY 2013-09-17 10:53:27 -06:00
Gregory Nutt
72340b85fe Add support for multiple PHY selections for multiple Ethernet MAC drivers 2013-09-17 10:52:23 -06:00
Gregory Nutt
e7479e9b9d Add prefex ETH0 to all PHY configurations to support multiple NICs 2013-09-17 10:45:07 -06:00
Gregory Nutt
9557eb70db Add prefex ETH0 to all PHY configurations to support multiple NICs 2013-09-17 10:44:23 -06:00
Gregory Nutt
b06216ff11 SAMA4 EMAC: Remove some editor garbage that ended up in the last commit 2013-09-16 18:04:38 -06:00
Gregory Nutt
7ef1bd2f4c SAMA5 EMAC: Add basic PHY logic 2013-09-16 18:00:21 -06:00
Gregory Nutt
50fd028680 SAMA5 EMAC: Packet transmission logic 2013-09-16 14:58:11 -06:00
Gregory Nutt
09e6c653cc SAMA4 EMAC: Add basic interrupt handling logic 2013-09-16 13:57:57 -06:00
Gregory Nutt
9d59d5ef13 SAMA5 EMAC: Incremental progress. Still not code complete 2013-09-16 11:36:12 -06:00
Gregory Nutt
af61f846f9 Freescale Kinetis KL25Z PIT and TPM module register definitions 2013-09-15 17:00:50 -06:00
Gregory Nutt
285f5201dc SAMA4 EMAC buffer allocation logic 2013-09-15 14:26:25 -06:00
Gregory Nutt
ed7c7a25e7 SAMA5 Ethernet: Add support for PHY interrupts 2013-09-15 12:24:42 -06:00