prepare 16550 UART driver to support PCI:
- [breaking change] change argument of uart_ioctl() from `struct file *filep` to `FAR struct u16550_s *priv`
Also fix moxart_16550.c build related to this change
- [breaking change] change argument of uart_getreg() and uart_putreg from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
Also fix arch/x86/src/qemu/qemu_serial.c and arch/x86_64/src/intel64/intel64_serial.c related to this change
- [breaking change] change argument of uart_dmachan() from `uart_addrwidth_t base` to `FAR struct u16550_s *priv`
- move `struct u16550_s` to public header
- generalize UART_XXX_OFFSET so we can use it with any register increment
- make u16550_bind(), u16550_interrupt(), u16550_interrupt() public
- remove arch/or1k/src/common/or1k_uart.c and use common 16550 MIMO interfacve
- change irq type in `struct u16550_s` from uint8_t to int to match MSI API
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
move MCR_OUT2 configuration from qemu-intel64/src/qemu_boot.c to common code
also leave this option disabled for qemu-intel64 as it's not required
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
Some UART Controllers (Synopsys DesignWare 8250) will trigger spurious interrupts when the Line Control Register (LCR) is set while the UART is busy. This patch provides the option (16550_WAIT_LCR) to wait for UART until it's not busy, before setting the LCR. (16550_WAIT_LCR is disabled by default)
This patch fixes the spurious UART interrupts for the upcoming port of NuttX to StarFive JH7110 SoC (with Synopsys DesignWare 8250 UART). [The patch is explained here](https://lupyuen.github.io/articles/plic#appendix-fix-the-spurious-uart-interrupts)
drivers/serial/uart_16550.c: If 16550_WAIT_LCR is enabled, wait until UART is not busy before setting LCR
include/nuttx/serial/uart_16550.h: Define the UART Status Register (USR) for checking if UART is busy
drivers/serial/Kconfig-16550: Added option 16550_WAIT_LCR to 16550 UART Config, disabled by default
All interrupts must be disabled to prevent re-entrancy and to prevent
interrupts from firing in the serial driver code.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
drivers/serial/uart_16550.c: Support 16550 auto hardware flow control
drivers/serial/uart_16550.c: Add configuration option CONFIG_16550_SUPRESS_INITIAL_CONFIG. This is identical to the standard configuration in arch/Kconfig CONFIG_SUPPRESS_UART_CONFIG, but with scope of only the 16550 driver.
drivers/serial/uart_16550.c: Add a configuration, analogous to the STM32 configuration option, to suppress the NuttX standard re-ordering for /dev/ttySN for special case of the 16550 UART.
config/serial: UART 16550: Add CONFIG_SERIAL_UART_ARCH_MMIO option so the a memory mapped device doesn't need to provide uart_getreg() and uart_putreg() implementations.
u16550_txempty() should check UART_LSR_TEMT to avoid some data left in the transmit FIFO
configs/z80sim and xtrs: Serial driver lower halfs ioctl methods should return a negated errno value, not set the errno variable.
drivers/wireless: CC1101 driver not permitted to set errno.
drivers/sensors: LIS331DL driver not permitted to set errno.
drivers/lcd: ILI9341 initialize method not permitted to set errno,
drivers/serial: 16550 UART driver IOCTL method must not set errno; it must return a negated errno value.
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
