sauttefk
|
dc402d8d3e
|
Add TI EK-TM4C1294XL launchpad support
|
2015-02-12 00:30:38 +01:00 |
|
Gregory Nutt
|
3465cb6138
|
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
|
2015-02-08 06:53:24 -06:00 |
|
Gregory Nutt
|
93ed9dc8d3
|
STM32 SPI: Clean-up asymmetric configuration of SPI6
|
2015-02-07 18:59:06 -06:00 |
|
Gregory Nutt
|
6f335dc6c6
|
STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane.
|
2015-02-07 13:59:45 -06:00 |
|
Gregory Nutt
|
8f4bbdd057
|
Updated Tiva ADC files
|
2015-02-06 16:56:12 -06:00 |
|
Gregory Nutt
|
2502835fe8
|
Tiva ADC: Add Kconfig options for ADC. From Calvin Maguranis
|
2015-02-05 19:05:13 -06:00 |
|
Gregory Nutt
|
0d316326c2
|
Tiva ADC: Partial build support. Still missing Kconfg changes
|
2015-02-05 18:01:18 -06:00 |
|
Gregory Nutt
|
9ad18d827e
|
Tiva ADC: Adds a Tiva ADC driver. From Calvin Maguranis
|
2015-02-05 17:36:23 -06:00 |
|
Gregory Nutt
|
a122910566
|
Tiva ADC: Register definitiona header file from Calvin Maguranis
|
2015-02-05 16:29:17 -06:00 |
|
Gregory Nutt
|
971c5c98fe
|
Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis
|
2015-02-05 13:51:32 -06:00 |
|
Gregory Nutt
|
c7f71c99a5
|
Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled
|
2015-02-05 11:47:56 -06:00 |
|
Gregory Nutt
|
cc63543b80
|
STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6.
|
2015-02-05 11:21:04 -06:00 |
|
Gregory Nutt
|
a9c71630e1
|
Add IPv6 support to network driver skeleton and to SAMA5D4 Ethernet driver (which, unfortunately is still missing address filtering logi)
|
2015-02-05 10:49:32 -06:00 |
|
Gregory Nutt
|
6568d94902
|
ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages.
|
2015-02-05 09:43:29 -06:00 |
|
Gregory Nutt
|
24d800398e
|
Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address
|
2015-02-04 14:51:20 -06:00 |
|
Gregory Nutt
|
72645e184d
|
Minor update to Kconfig file selections
|
2015-02-04 08:21:32 -06:00 |
|
Gregory Nutt
|
778d326c51
|
Re-arrange condition logic from the last change to avoid having STM32-specific conditional logic outside of the STM32 sandbox.
|
2015-02-04 07:24:19 -06:00 |
|
Gregory Nutt
|
1c05245963
|
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
|
2015-02-04 06:49:05 -06:00 |
|
Gregory Nutt
|
c63c55ac3f
|
EFM: Remove a misbehaving assertion. From Pierre-noel Bouteville
Also remove spaces before and after paretheses to conform to coding standard.
|
2015-02-03 13:34:37 -06:00 |
|
Gregory Nutt
|
59d5149de6
|
Remove and extra endif from the Kconfig
|
2015-02-03 12:46:40 -06:00 |
|
Gregory Nutt
|
1d534ff896
|
Convert the 64-bit usec limit to a 32-bit tick limit
|
2015-02-03 07:18:17 -06:00 |
|
Gregory Nutt
|
cabaf7399a
|
SAM4CM: Add support for tickless operation
|
2015-02-03 07:00:54 -06:00 |
|
Gregory Nutt
|
a6f1dfa5b0
|
Remove execute privileges from some header files
|
2015-02-01 06:24:18 -06:00 |
|
Gregory Nutt
|
31adb7b4c1
|
EFM32 Add support of BURTC and add possibility of debug message of RMU: Pierre-noel Bouteville
|
2015-02-01 06:19:53 -06:00 |
|
Gregory Nutt
|
01c57668c9
|
Fix a missing quotation mark in configuration description
|
2015-01-30 12:28:04 -06:00 |
|
Gregory Nutt
|
b6d51ef26d
|
EFM32: Logic to unconditionally enable LE clocking. Even you don't use core clock LE as source for LFA or LFB, to read are write any register not clocked by HFPERCLK or HFCORECLK, HFCORECLKLE should be enabled. From Pierre-noel Bouteville.
|
2015-01-30 07:44:49 -06:00 |
|
Gregory Nutt
|
0c47dbe92d
|
ARM assembly language memcpy.S was not returning a value in R0 it is required to do. From David Sidrane
|
2015-01-29 06:36:53 -06:00 |
|
Gregory Nutt
|
80cfc0bdd3
|
Tiva Ethernet: Move place where interrupts are disabled. It is probably not possible, but the logic looks like it could leave interrupts disabled
|
2015-01-27 14:59:31 -06:00 |
|
Gregory Nutt
|
4146fdbe8f
|
Recent changes to stm32_rtcc.c do not compile with STM32L15XX configurations. From Jussi Kivilinna.
|
2015-01-27 09:20:42 -06:00 |
|
Gregory Nutt
|
c74aaafc72
|
Disabling any of EXTI 5-9 interrupts was disabling interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi Kivilinna.
|
2015-01-27 09:15:43 -06:00 |
|
Gregory Nutt
|
c16abdcd47
|
Get USART 2 & 3 working on lpc4357-evb. These changes are required to get USART 2 and 3 working on the Embest development board. From Toby Duckworth
|
2015-01-26 07:33:22 -06:00 |
|
Gregory Nutt
|
7e46e94546
|
Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless
|
2015-01-24 06:49:51 -06:00 |
|
Gregory Nutt
|
05c5c8c337
|
Add CONFIG_STACK_COLORATION that does the same thing as CONFIG_DEBUG_STACK but without enabling debug. From David Sidrane
|
2015-01-24 06:03:39 -06:00 |
|
Gregory Nutt
|
2f3fb08869
|
Add support for the EFM32 reset management unit (RMU). From Pierre-noel Bouteville
|
2015-01-23 15:25:10 -06:00 |
|
Gregory Nutt
|
7106469191
|
Armv7-M: Remove Px4-only setting of stack to 0xff. This is incompatible with standard NuttX stack montitoring logic
|
2015-01-22 10:09:10 -06:00 |
|
Gregory Nutt
|
1dd722f836
|
STM32 Ethernet: Port IPv6 address filtering from the Tiva TM4C driver
|
2015-01-21 15:04:39 -06:00 |
|
Gregory Nutt
|
32d2a4c548
|
All Ethernet drivers (again): Missed one place where arp_out() is called and neighber_out() needs to be called
|
2015-01-21 11:36:33 -06:00 |
|
Gregory Nutt
|
1ad73c52b1
|
Networking: Modify all Ethernet drivers: Do neighbor look-up on all outgoing IPv6 packs in order to properly set the destination link layer address.
|
2015-01-20 15:52:25 -06:00 |
|
Gregory Nutt
|
a53ae59284
|
Networking: Add missing raw/packet socket support to all Ethernet drivers
|
2015-01-20 15:14:29 -06:00 |
|
Gregory Nutt
|
92f440c20c
|
Ethernet drivers: Use IFF_IS_IPv4 macro. Cannot rely on the EtherType being set correctly.
|
2015-01-20 06:26:14 -06:00 |
|
Gregory Nutt
|
8c74fb427e
|
TM4C Ethernet: Fix the ICMPv6 multicast address
|
2015-01-19 14:56:43 -06:00 |
|
Gregory Nutt
|
28aadce3e8
|
Tiva Ethernet: Add support for receiving IPv6 multicast frames
|
2015-01-19 12:43:13 -06:00 |
|
Gregory Nutt
|
e2aad9c05a
|
nuttx/arch/arm/src/stm32/stm32_serial.c: fix declaration and definition of up_receive() and up_dma_receive() to match fields of uart_ops_s from nuttx/include/nuttx/serial/serial.h
|
2015-01-19 06:42:27 -06:00 |
|
Gregory Nutt
|
bbafb8f2fe
|
Tiva Ethernet: When calling into the stack from the worker thread, it is necessary to have the stack locked
|
2015-01-18 16:58:11 -06:00 |
|
Gregory Nutt
|
a386319013
|
Tiva Ethernet: Don't try to print IPv4 address if IPv4 is not enabled
|
2015-01-18 11:38:40 -06:00 |
|
Gregory Nutt
|
65ae9c990c
|
Tiva Ethernet: Back out previous change... it is WRONG
|
2015-01-17 11:55:20 -06:00 |
|
Gregory Nutt
|
b7c0bfebd5
|
Tive Ethernet: Fix some race conditions in the driver that become apparent when debug is enabled
|
2015-01-17 10:59:45 -06:00 |
|
Gregory Nutt
|
26499b440b
|
Tiva Ethernet: Costmetic changes to comments and debug strings
|
2015-01-17 10:27:57 -06:00 |
|
Gregory Nutt
|
7b41d66962
|
Tiva Ethernet: Remove assertion. Just log and error and continue
|
2015-01-17 10:01:55 -06:00 |
|
Gregory Nutt
|
1be7285567
|
TM4C Ethernet: Add some assertions
|
2015-01-16 15:25:18 -06:00 |
|