sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
12,290 Commits 1 Branch 0 Tags 291 MiB
e8c2466c1c
Commit Graph

1533 Commits

Author SHA1 Message Date
Gregory Nutt
361e35a7be QSPI: Make changes to interface to better work with the SAMV71 2015-08-27 14:16:51 -06:00
Gregory Nutt
d06b709652 Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-27 12:12:24 -06:00
Gregory Nutt
8811681d7f networking: Big performance improvement for local loopback driver 2015-08-27 11:05:53 -06:00
SaeHie Park
a268e0aeb9 Fix a typo from an earlier commit 2015-08-26 18:12:58 -06:00
Gregory Nutt
7936819fcc ST25FL1: Flesh out more initialization logic 2015-08-26 14:16:45 -06:00
Gregory Nutt
e6be3cea9f Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-26 10:44:35 -06:00
Gregory Nutt
7a168a791f Networking: Fix loopback device MTU 2015-08-26 10:33:44 -06:00
Gregory Nutt
044f5d38ac Merge remote-tracking branch 'origin/master' into st25fl1 2015-08-26 07:20:36 -06:00
Juha Niskanen
70620d3dd6 rivers/rwbuffer: Fix some logic errors 2015-08-26 07:18:50 -06:00
Gregory Nutt
1cf57ae2bd Cosmetic 2015-08-26 07:16:07 -06:00
Gregory Nutt
32de036490 Local loopback: Set the IFF_UP flags during initialization because the local loopback device is always up 2015-08-25 20:09:12 -06:00
Gregory Nutt
8fe0121e1a Convert fragmentation ST24FL1 driver to use QSPI interface 2015-08-25 17:20:54 -06:00
Gregory Nutt
94ecf7ebad drivers/mtd/st25fl1.c: Add a driver for ST25FL1*K QuadSPI FLASH parts 2015-08-25 09:10:12 -06:00
Gregory Nutt
79aa3d40b0 Kconfig: CONFIG_NET_MULTILINK and CONFIG_NET_MULTINIC must be support if the loopback device and any real network device are selected 2015-08-25 06:51:15 -06:00
Gregory Nutt
a2c0068011 Fix some IPv6 loopback device problems 2015-08-24 17:27:38 -06:00
Gregory Nutt
3018dc31e5 Network local loopback: Another structural simplication 2015-08-24 16:08:17 -06:00
Gregory Nutt
eea69cf6e3 Networking: Local loopback, fix a error in last commit + fix a bad functional partitioning 2015-08-24 15:23:09 -06:00
Gregory Nutt
4d040d572a Networking: Eliminate recursion from the local loopback driver 2015-08-24 15:16:03 -06:00
Gregory Nutt
3c5f817513 Networking: Local loopback is basically functional and is no longer EXPERIMENTAL 2015-08-24 13:58:57 -06:00
Gregory Nutt
933d74e5c1 Networking: With these changes, I can ping the local loopback device from the simulator 2015-08-24 13:49:12 -06:00
Gregory Nutt
0b012c7978 Fix some initial loop back device compilation errors; mark configuration as EXPERIMENTAL 2015-08-24 11:29:54 -06:00
Gregory Nutt
ccb24e1766 drivers/net: Add a basic prototype for a local loopback device 2015-08-24 11:03:36 -06:00
Gregory Nutt
e21501c699 Merge remote-tracking branch 'origin/master' into localhost 2015-08-24 08:29:36 -06:00
Gregory Nutt
ea2fafb024 Add definitions to support a local loopback link layer 2015-08-24 08:25:08 -06:00
Gregory Nutt
3743d3d84a Add configuration options for forthcoming st25fl1 devices 2015-08-24 08:00:39 -06:00
Max Neklyudov
622c5c9aa6 Another TUN driver fix from Max Neklyudov 2015-08-21 07:40:13 -06:00
Max Neklyudov
425146255a Network drivers: Fix bug in tun interface driver. From Max Neklyudov 2015-08-17 09:04:58 -06:00
Gregory Nutt
51f386d08a Fix more common typos 2015-08-16 11:07:23 -06:00
Gregory Nutt
77f5c34af0 Fix some common typos 2015-08-16 11:00:30 -06:00
Paul A. Patience
3303ef8c85 Added support for other MS58XX altimeters. 2015-08-14 20:04:16 -04:00
Gregory Nutt
a543dfbcec Update ChangeLog; Convert a few tabs to spaces 2015-08-11 21:12:15 -06:00
Paul A. Patience
c4b888b41d Added MS5805 altimeter. 2015-08-11 22:50:11 -04:00
Paul A. Patience
a634ad5528 Added MB7040 sonar. 2015-08-11 13:26:56 -04:00
Paul A. Patience
65792c5dbc Added forward declarations of structures to fix header inclusion 
order bugs.
Removed an unused variable.
Added debug asserts to check for invalid I2C addresses.
 2015-08-10 16:18:37 -04:00
Paul A. Patience
c0964a17b4 Fixed a forgotten FAR, a typo, and an incorrect bit-field definition. 2015-08-10 14:45:40 -04:00
Gregory Nutt
9f1d7cddd8 Merged in paulpatience/nuttx (pull request #14) 
Converted the AS5048B to use the quadrature encoder interface, changed copyright notice to my boss's preference, and updated ChangeLog to use my full name
 2015-08-10 12:22:30 -06:00
Paul A. Patience
877d5f3b09 Changed copyright notices to my boss's preference. 2015-08-10 14:15:07 -04:00
Paul A. Patience
1d0e25af30 Convert the AS5048B to use the quadrature encoder interface. 2015-08-10 13:41:39 -04:00
David Sidrane
c83d92e846 RAMTRON: Update driver to include support for newer RAMTRON parts. 2015-08-10 11:30:37 -06:00
Gregory Nutt
b6d6776d02 Add a preliminary definition for an SPI slave interface 2015-08-08 10:45:15 -06:00
Gregory Nutt
e9bbc57831 Merged in paulpatience/nuttx (pull request #12) 
Added AS5048B magnetic rotary encoder.
 2015-08-07 15:33:48 -06:00
Paul A. Patience
b7e0fc34c5 Added AS5048B magnetic rotary encoder. 2015-08-07 17:22:01 -04:00
Gregory Nutt
834e01ea7c can.c: Fix a couple of missed DLC conversions 2015-08-07 11:41:31 -06:00
Gregory Nutt
6d59603610 Trivial updates from review of LM92 driver; Update ChangeLog 2015-08-06 16:33:02 -06:00
Gregory Nutt
41a09a6d64 Merged in paulpatience/nuttx (pull request #11) 
Added LM92 temperature sensor.
 2015-08-06 16:26:26 -06:00
Paul A. Patience
282c4f5347 Added LM92 temperature sensor. 2015-08-06 17:35:34 -04:00
Gregory Nutt
0dd273935a Standardize naming of all SLIP configuration options 2015-08-06 15:08:15 -06:00
Gregory Nutt
86769101a1 SLIP: Review code, update comments, add missing configuration items 2015-08-06 14:32:12 -06:00
Gregory Nutt
e1c902d468 Remove some incorrect comments 2015-08-06 14:06:43 -06:00
Gregory Nutt
007e258c2b Update some function headers 2015-08-05 16:22:40 -06:00
Gregory Nutt
4b58990362 CAN: Add CAN FD mode as a configuration option 2015-08-05 13:56:48 -06:00
Gregory Nutt
36d4559ee8 CAN: Define IOCTL commands that manage filters 2015-08-05 13:00:31 -06:00
Gregory Nutt
e3decca82c Cosmetic update to some comments 2015-08-05 08:07:58 -06:00
Anton D. Kachalov
2db954c189 Add support for multicast address (via hashtable) 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 19:43:17 +03:00
Gregory Nutt
679ae385aa Merged in rnouse/nuttx (pull request #9) 
Custom IOCTL support and more shadow warnings fixup
 2015-08-03 06:46:43 -06:00
Anton D. Kachalov
1bb74504a8 Add support for custom platform IOCTL on UART 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 15:32:51 +03:00
Gregory Nutt
08d83cfae3 Merged in rnouse/nuttx (pull request #8) 
UART 16550: putc logic fixup
 2015-08-03 06:32:17 -06:00
Anton D. Kachalov
a07ed262b4 Revert "Two more places there THRE is used with inverted sense" 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:21:01 +03:00
Anton D. Kachalov
2fa6237b49 Revert THRNE-patch. The problem was in u16550_putc 
Regarding to:
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1584
https://github.com/tanzilli/ariag25-linux-2.6.39/blob/ariag25/drivers/tty/serial/8250.c#L1913

When UART_LSR_THRE bit is set, then we ready to transmit more.

Current u16550_putc loops while UART_LSR_THRE bit is set. This logic have to be inverted.

Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-03 13:19:55 +03:00
Gregory Nutt
15db2a45a4 drivers/net/slip.c: Fix another compilation error 2015-08-02 07:20:36 -06:00
Gregory Nutt
3bc46d9aad Merged in rnouse/nuttx (pull request #6) 
[drivers/serial/uart_16550] Typo fix in data bits setup
 2015-07-31 11:25:35 -06:00
Anton D. Kachalov
274b7986be [drivers/serial/uart_16550] Typo fix in data bits setup 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 20:19:54 +03:00
Gregory Nutt
e0fdd46292 USB host file uses DEBUGASSERT and so must include assert.h. Note by Brennan Ashton 2015-07-31 07:24:43 -06:00
Gregory Nutt
3669292024 Cosmetic changes from review of pull request 2015-07-31 07:17:07 -06:00
Anton D. Kachalov
2ef03d49fe [drivers/net/ftmac100] Remove private board-specific interrupt configuration calls. Configure Mode/Level outside of the driver scope. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 14:12:10 +03:00
Anton D. Kachalov
7613d97a90 [drviers/net/ftmac100] receive: process all available RX descriptors 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-31 08:48:13 +03:00
Anton D. Kachalov
cbd4586cad [drivers/net/skeleton] Add missed #endif 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-07-30 23:16:34 +03:00
Juha Niskanen
c33d61e00e Add missing configuration option for last set of ADC changed 2015-07-30 07:38:45 -06:00
Gregory Nutt
fb82061bf7 Two more places there THRE is used with inverted sense 2015-07-29 20:42:49 -06:00
Gregory Nutt
8935ff34d5 16550 UART Driver: Add a configuration option to indicate the the THR empty bit is inverted. This is the the case for the moxART SoC. Based comments from Anton D. Kachalov 2015-07-29 16:31:21 -06:00
Anton D. Kachalov
f230c87fba Fix a type in the network driver skeleton file. 2015-07-29 16:08:56 -06:00
Anton D. Kachalov
88861e562a Add support for a Faraday FTMAC100 Ethernet MAC Driver. From Anton D. Kachalov 2015-07-29 15:57:58 -06:00
Gregory Nutt
bb30fa039f Fix a warning detected by tools/tesbuild.sh. function was not returning the correct value in the case of errors 2015-07-22 15:46:43 -06:00
Alan Carvalho de Assis
a01b2e5bbc drvers/sensor and include/nuttx/sensors: Add support to Bosch BMP180 barometer. From Alan Carvalho de Assis. 2015-07-20 07:18:27 -06:00
Gregory Nutt
5a7b2757aa Add definitions for SMSC LAN8742A PHY 2015-07-19 13:09:48 -06:00
Gregory Nutt
cb5a3bd84d Fix error in Kconfig of previous change: Can't mix tabs and spaces in help text 2015-07-17 08:31:21 -06:00
Gregory Nutt
652371c919 Add CONFIG_NETDEV_LATEINIT that can be used to suppress calls to up_netinitialize() from early initialization 2015-07-17 07:20:16 -06:00
Gregory Nutt
bf1adc1e55 Another CAN driver fix: From inspection, it appears that RTR counter was not being handled correctly 2015-07-15 19:52:08 -06:00
Gregory Nutt
f41df38b0b More CAN driver fixes: remove and unused semaphore. Looks to me that waiter counts are not being initialized 2015-07-15 19:27:36 -06:00
Gregory Nutt
048d338808 Another oops. I introduced a but in a previous commit. The CAN read method nees to return an error if sem_wait() fails for any reason 2015-07-15 18:51:31 -06:00
Gregory Nutt
621fef2c31 Some trivial clean up associated with the last commit 2015-07-15 18:43:53 -06:00
Gregory Nutt
320c584888 CAN driver: Fix a problem where the rx_sem count can grow without bounds 2015-07-15 18:20:08 -06:00
Alan Carvalho de Assis
d7d15072c4 Updated SSD1306 driver 2015-07-15 13:28:31 -06:00
Gregory Nutt
8580d37352 SSD1306: Rename ssd1306_helpers.h to ssd1306.h. Move all SSD1306 driver definitions from ssd1306_base.c to ssd1306.h 2015-07-15 11:46:28 -06:00
Alan Carvalho de Assis
a3e24a0b6c Modify the SSD1306 LCD driver to support either the SPI or I2C interface. From Alan Carvalho de Assis, 2015-07-15 11:21:54 -06:00
Sebastien Lorquet
9c9b6162d8 PCA9555: Extend interface to include methods for reading more than one bit at a time. From Sébastien Lorquet. 2015-07-10 10:33:07 -06:00
Gregory Nutt
3971d97332 Update ChangeLog 2015-07-09 08:27:08 -06:00
Sebastien Lorquet
b947002d6a This commit adds: 
-headers in nuttx/ioexpander to define the "generic" ioexpander framework
-files in drivers/ioexpander for the implementation of the NXP PCA9555 framework
-bindings in drivers/Kconfig and drivers/Makefile

From Sebastien Lorquet
 2015-07-09 08:27:07 -06:00
Gregory Nutt
be09a87c0e SST25: Eliminate some warnings 2015-07-03 14:38:33 -06:00
Sebastien Lorquet
c9649b5f04 STMPE811: I found that, in stmpe811_instanciate(), when CONFIG_STMPE811_MULTIPLE is enabled, and the call to stmpe811_checkid() fails, then the linked device list is not restored to its previous state. From Sebastien Lorquet. 2015-07-02 08:19:29 -06:00
Gregory Nutt
09c7373f24 Fix misc. compilation error/warning detected by tools/testbuild.sh 2015-07-01 14:33:37 -06:00
Gregory Nutt
8fbac280e9 drivers/net/slip.c: Fix a missed name change when many of network interface names changed sometime back but were apparently never updated for SLIP 2015-07-01 11:58:06 -06:00
Gregory Nutt
e9a4455038 drivers/usbdev: Eliminate some warnings 2015-07-01 10:02:19 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
bb7e15fc57 Misc. improvements to the TUN driver, mostly related to poll(). From Max Neklyudov 2015-06-04 06:54:55 -06:00
Gregory Nutt
391367e8ca LPC17 Ethernet: Add support for the Micrel KSZ8041 PHY. 2015-06-03 17:34:36 -06:00
Gregory Nutt
7355a9044a TUN driver bug fix. From Max Neklyudov. 2015-06-03 10:45:13 -06:00
Gregory Nutt
4f05c80794 LPC17xx Ethernet: Improve CONFIG_NET_NOINTS implementation 2015-06-01 08:07:32 -06:00
Gregory Nutt
0476d8168a More missing semicolons after DEBUGASSERT 2015-05-27 13:32:39 -06:00
Gregory Nutt
9e1c72e3e2 Add basic board build configurat for the SAML21 Xplained. Initial commit is jsut the SAMD20 Xplained with name changes and does not yet build 2015-05-18 13:16:32 -06:00