Gregory Nutt
|
31f832d8c5
|
IP forwarding: Flesh out TCP, UDP, and ICMPv6 packet forwarding logic.
|
2017-07-05 11:01:16 -06:00 |
|
Gregory Nutt
|
f07420dedf
|
SAME70-Xplained: Add MRF24J40 support.
|
2017-07-04 14:31:26 -06:00 |
|
Gregory Nutt
|
9aac1dd44d
|
configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files.
|
2017-04-26 10:12:13 -06:00 |
|
Gregory Nutt
|
35dfe25430
|
Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the board initialization logic just like every other device driver.
|
2016-12-06 08:51:37 -06:00 |
|
Gregory Nutt
|
7467329a98
|
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
|
2016-12-03 16:28:19 -06:00 |
|
Gregory Nutt
|
b39556f625
|
Update READMEs
|
2016-11-22 09:03:50 -06:00 |
|
Gregory Nutt
|
63b1eb09e6
|
Centralize definitions associated with CONFIG_DEBUG_CAN
|
2016-06-15 15:45:27 -06:00 |
|
Gregory Nutt
|
1cdc746726
|
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
|
2016-06-11 14:14:08 -06:00 |
|
Gregory Nutt
|
3a74a438d9
|
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
|
2016-06-11 11:50:18 -06:00 |
|
Gregory Nutt
|
9ec104834a
|
Remove CONFIG_USARTn_ISUART
|
2016-05-25 11:21:48 -06:00 |
|
Jose Pablo Carballo
|
d974d34bd1
|
Documentation and configs for using OpenOCD to flash the SAME70 Xplained board
|
2016-02-11 19:04:21 -06:00 |
|
Gregory Nutt
|
6b449ac409
|
The I2C_TRANSFER method is no longer optional
|
2016-01-31 14:15:32 -06:00 |
|
Gregory Nutt
|
6bd4075951
|
LaunchXL-TMS57004: Add support for on-board LEDs and buttons
|
2015-12-25 15:19:09 -06:00 |
|
Gregory Nutt
|
e1d8ab37b5
|
Update README files
|
2015-12-08 07:32:47 -06:00 |
|
Gregory Nutt
|
5adb77cb51
|
SAME70-Xplained: Updates using Arduino serial (UART3).
|
2015-12-05 16:13:29 -06:00 |
|
Gregory Nutt
|
5480d18026
|
Port logic to enable PCK6 in tickless mode from the samv71-xult to the same70-xplained
|
2015-12-04 12:37:00 -06:00 |
|
Gregory Nutt
|
734144ad66
|
Update READMEs
|
2015-12-03 09:52:50 -06:00 |
|
Gregory Nutt
|
f04287305d
|
Update README
|
2015-12-02 18:54:17 -06:00 |
|
Gregory Nutt
|
216f762e56
|
Update README
|
2015-12-02 15:54:20 -06:00 |
|
Gregory Nutt
|
4991f94792
|
Update README files
|
2015-12-02 09:22:26 -06:00 |
|
Gregory Nutt
|
99c460a696
|
Upate README files
|
2015-12-02 08:37:42 -06:00 |
|
Gregory Nutt
|
9a4192d22b
|
Remove CONFIG_NET_PINGADDRCONF. This was a uIP way of assigning IP addresses, but is not standard and not a appropriate feature in general.
|
2015-12-01 07:47:41 -06:00 |
|
Gregory Nutt
|
fba809d7c8
|
Update README files
|
2015-11-30 17:37:01 -06:00 |
|
Gregory Nutt
|
2e78fc7178
|
configs/same70-xplained: Added a network enabled NSH configuration
|
2015-11-30 16:50:40 -06:00 |
|
Gregory Nutt
|
2e3f1327bd
|
configs/same70-xplained/nsh: The NSH configuration now appears to be fully functional
|
2015-11-30 16:05:32 -06:00 |
|
Gregory Nutt
|
0ca9047488
|
SAME70 Xplained: Update some PHY pin definitions
|
2015-11-19 17:16:11 -06:00 |
|
Gregory Nutt
|
e9abfb0de8
|
SAMV71-XULT: Add support for an external I2C RTC
|
2015-11-19 14:52:52 -06:00 |
|
Gregory Nutt
|
cedec09f8f
|
SAME70 Xplained: Update README; switch to USART1
|
2015-11-19 12:15:13 -06:00 |
|
Gregory Nutt
|
5106a8a9ca
|
SAME70 Xplained: Updated README
|
2015-11-19 10:25:08 -06:00 |
|
Gregory Nutt
|
046212dc4e
|
Update README
|
2015-11-18 18:09:06 -06:00 |
|
Gregory Nutt
|
25251db103
|
SAME70-Xplained: Has only a single LED and a single push button
|
2015-11-18 16:45:29 -06:00 |
|
Gregory Nutt
|
c154a4a1e2
|
Add basic support for the SAME70-Xplained board
|
2015-11-18 13:54:57 -06:00 |
|