State of problem:
- Some drivers that do not support write operations (does not
have write handler or ioctl do not perform any write actions)
are registered with write permissions
- Some drivers that do not support read operation (does not
have read handler or ioctl do not perform any read actions)
are registered with read permissions
- Some drivers are registered with execute permissions
Solution:
- Iterate code where register_driver() is used and change 'mode'
parameter to reflect the actual read/write operations executed
by a driver
- Remove execute permissions from 'mode' parameter
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
1. The task which called nxsem_release_holder may not be a holder of the semaphore,
counts of the holder would not be decreamented.
This commit try to resolve the problem if there is only one holder.
2. Avoid counts overflow.
Signed-off-by: Zeng Zhaoxiu <walker.zeng@transtekcorp.com>
Add a list in TCB to track all semphores the task held, so we
can release all holders when exit, so nxsched_verify_tcb
is unnecessary.
Signed-off-by: Zeng Zhaoxiu <walker.zeng@transtekcorp.com>
There is a potential problem that can lead to deadlock at
condition wait, if the timeout of watchdog is a very small value
(1 tick ?), the timer interrupt will come before the nxsem_wait()
Revert "sched: pthread: Remove a redundant critical section in pthread_condclockwsait.c"
Revert "sched: semaphore: Remove a redundant critical section in nxsem_clockwait()"
Revert "sched: semaphore: Remove a redundant critical section in nxsem_tickwait()"
This reverts commit 7758f3dcb1.
This reverts commit 2976bb212e.
This reverts commit 65dec5d10a.
Signed-off-by: chao.an <anchao@xiaomi.com>
Summary:
- This commit removes a redundant critical section in nxsem_tickkwait()
Impact:
- None
Testing:
- Tested with ping with the following configs
- spresense:rndis, spresense:rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit introduces SP_WFE() and SP_SEV() to be used for spinlock
- Also, use wfe/sev instructions for ARMV7-A to reduce power consumption
Impact:
- ARMV7-a SMP only
Testing:
- sabre-6quad:smp (QEMU, dev board)
- maix-bit:smp, esp32-devkitc:smp, spresense:smp sim:smp (compile only)
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
to save the preserved space(1KB) and also avoid the heap overhead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
1. Internal scheduler functions should begin with nxsched_, not sched_
2. Follow the consistent naming patter of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions
# clock_systimer -> clock_systime_tick
# clock_systimespec -> clock_systime_timespec
sched_oneshot_extclk -> nxsched_oneshot_extclk
sched_period_extclk -> nxsched_period_extclk
# nxsem_setprotocol -> nxsem_set_protocol
# nxsem_getprotocol -> nxsem_get_protocol
# nxsem_getvalue -> nxsem_get_value
nxsem_initholders -> nxsem_initialize_holders
nxsem_addholder -> nxsem_add_holder
nxsem_addholder_tcb -> nxsem_add_holder_tcb
nxsem_boostpriority -> nxsem_boost_priority
nxsem_releaseholder -> nxsem_release_holder
nxsem_restorebaseprio -> nxsem_restore_baseprio
Some planned name changed were skipped for now because they effect too many files (and would require many hours of coding style fixups).
Linux Programmer's Manual:
SEM_POST(3)
NAME
sem_post - unlock a semaphore
...
ERRORS
...
EOVERFLOW
The maximum allowable value for a semaphore would be exceeded.
Change-Id: I57c1a797a5510df4290a10aa2f3106fd01754b37
Signed-off-by: chao.an <anchao@xiaomi.com>
- Remove per-thread errno from the TCB structure (pterrno)
- Remove get_errno() and set_errno() as functions. The macros are still available as stubs and will be needed in the future if we need to access the errno from a different address environment (KERNEL mode).
- Add errno value to the tls_info_s structure definitions
- Move sched/errno to libs/libc/errno. Replace old TCB access to the errno with TLS access to the errno.
There is a DEBUGPANIC in some logic. This happens if a a task exists at certain points with priority inheritance enabled. This event was not expected in the original design (although logic was provided to support it). Since, apparently, it does happen, the DEBUGPANIC must be removed.
Noted by Brennan Ashton.
nxsem_timedwait_uninterruptible() must return -ECANCELED if the thread is canceled:
include/nuttx/semaphore.h: Return if nxsem_wait() returns ECANCELED meaning that the thread waiting for the semaphore has been canceled.
sched/semaphore/sem_timedwait.c: Same change (the inline version is in semaphore.h, the non-inlined version is in sem_tickwait.c).
drivers/sensors/lps25h.c and drivers/wireless/bluetooth/bt_uart_bcm4343x.c: Make sure that the caller deals correctly with the -ECANCELED return value.
Refer to issue 619.
I finally figured out why the ez80 code has gotten so big. It is because people have been put putting big inline functions in header files. That is a violation of the coding standard, since only c89 compatibility is required in all common code. But we have been tolerating inline function it because include/nuttx/compiler.h defines 'inline' to be nothing for C89 compilers.
As a result, static inline functions declared within a C file not so bad; the inline qualifier is ignored, if not supported, but otherwise all is well.
But it is catastrophic in header files. Those static inline functions are included as static functions and implemented in EVERY file that includes those header files, even if the functions are never called. That makes the code base huge!So there is another PR coming to fix some of the worst offenders.
This commit fixes two of the worst offenders I have encountered so far: include/nuttx/sempahore.h and cache.h. But there may be a few other changes needed. Under include/nuttx there are still inline functions thread.h, inclue/nuttx/list.h, mutex.h, tree.h, and include/nuttx/crypto/blake2s.h with no protection for compilers that do not handler the inline qualifier. Otherwise we are clean.
With the changes to these two header files, the size of the z20x build is reduced by about 40%. And incredible size savings.
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
