Some PPG devices have 4 ADCs to output quad-channel PPG values while some of them only have 2 ADCs to output dual-channel PPG.
To deal the case above, the type PPGD(PPG of Dual-channel) takes the place of former type PPG, which also have 2-channel PPG outputs. Type PPGQ (PPG of Quad-channel) is new for 4-ADC-PPG. Both types have contained new data "gain" to indicate ADC gains of each PPG channel, for the reason that the gains may vary during automatical optical adjustments.
Signed-off-by: liucheng5 <liucheng5@xiaomi.com>
- "op_mode" instead of "mode" (compilation error)
- CONFIG_ISL29023_I2C_FREQUENCY instead of CONFIG_LM75_I2C_FREQUENCY
(probably a leftover)
- Fix a couple of format warnings: now using PRIu32
- Also minor comment changes
sensors/wtgahrs2.c: In function 'wtgahrs2_gps_data':
Error: sensors/wtgahrs2.c:332:14: error: format '%llu' expects argument of type 'long long unsigned int', but argument 3 has type 'uint64_t' {aka 'long unsigned int'} [-Werror=format=]
332 | sninfo("Time : %llu utc_time: %llu\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
333 | rtdata->gps.timestamp, rtdata->gps.time_utc);
| ~~~~~~~~~~~~~~~~~~~~~
| |
| uint64_t {aka long unsigned int}
sensors/wtgahrs2.c:332:25: note: format string is defined here
332 | sninfo("Time : %llu utc_time: %llu\n",
| ~~~^
| |
| long long unsigned int
| %lu
In file included from sensors/wtgahrs2.c:37:
Error: sensors/wtgahrs2.c:332:14: error: format '%llu' expects argument of type 'long long unsigned int', but argument 4 has type 'uint64_t' {aka 'long unsigned int'} [-Werror=format=]
332 | sninfo("Time : %llu utc_time: %llu\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
333 | rtdata->gps.timestamp, rtdata->gps.time_utc);
| ~~~~~~~~~~~~~~~~~~~~
| |
| uint64_t {aka long unsigned int}
sensors/wtgahrs2.c:332:40: note: format string is defined here
332 | sninfo("Time : %llu utc_time: %llu\n",
| ~~~^
| |
| long long unsigned int
| %lu
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt has submitted the SGA
Haltian Ltd has submitted the SGA
Hexagon AB has submitted the SGA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Omni Hoverboards has submitted the SGA
Paul Alexander Patience has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Bill Gatliff has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Gregory Nutt has submitted the SGA
Augusto Fraga Giachero has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Verge Aero has submitted the SGA
Anthony Merlino has submitted the SGA
Gregory Nutt has submitted the SGA
Sebastien Lorquet has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Modified the logic of the selftest according to the ST manual.
Signed-off-by: yangjiukui <yangjiukui@xiaomi.com>
Change-Id: Id55139abf173728de4647533b26f7ab5e9a6b1fe
There were some mistakes in porting to the common sensors, and they
caused the following problems.
- Hardfault by bmp280_set_interval
- Read data always zero
drivers/sensors/hyt271.c:
* struct hyt271_dev_s: Identifier "lock_measure_cylce" was
misspelled. Fix to "lock_measure_cycle" and update all instances
in the file.
* hyt271_mr(), hyt271_cmd(), hyt271_change_addr(),
hyt271_measure_read(), hyt271_thread(): Update instances of the
renamed "lock_measure_cycle" variable and fix various typos in
comments.
1.fix crash casued by closing the handle during the reading.
2.fix set_interval fail sometime:When fakesensor was activated, csv file is not opened timely, so
the sensor->interval that set_interval() seted will be coverd by
interval form csv file.
Signed-off-by: buyuer <dingddding@163.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Removes the family identifier from the device configuration, since the device
family is already part of the rom code and the underlying logic does know how
to extract this information.
include/nuttx/1wire drivers/sensors
stm32f103-minimim
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
This adds a sensor driver for the hyt271, hyt221, and hyt939 sensor module from
vendor iST (Innovative Sensor Technology). This sensor type is connected via i2c
bus and allows the measurement of relative humidity and temperature.
Each driver instance supports two different character device for each type
(/dev/sensor/tempX and /dev/sensor/humiX).
This driver also supports changing the i2c address of one connected sensor on
the bus. This requires a callback to the platform-specific board logic which
must ensure a power-on reset.
Optional the driver allows setting up a read interval for fetching sensor data.
This is done by a worker thread and can be useful when watching several sensors
via poll() by the userspace application.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
