| .. |
|
a1x
|
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
|
2016-06-20 12:44:38 -06:00 |
|
arm
|
Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.
|
2016-06-21 05:26:08 -06:00 |
|
armv6-m
|
Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.
|
2016-06-21 05:26:08 -06:00 |
|
armv7-a
|
Fix a cloned typo
|
2016-10-19 09:14:21 -06:00 |
|
armv7-m
|
Fix a cloned typo
|
2016-10-19 09:14:21 -06:00 |
|
armv7-r
|
Fix a cloned typo
|
2016-10-19 09:14:21 -06:00 |
|
c5471
|
Fix names of pre-processor variables used in header file idempotence
|
2016-08-06 18:48:45 -06:00 |
|
calypso
|
Fix names of pre-processor variables used in header file idempotence
|
2016-08-06 18:48:45 -06:00 |
|
common
|
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
|
2016-07-20 13:15:37 -06:00 |
|
dm320
|
Fix names of pre-processor variables used in header file idempotence
|
2016-08-06 18:48:45 -06:00 |
|
efm32
|
Make bit-order SPI H/W feature configurable for better error detection
|
2016-08-08 11:54:13 -06:00 |
|
imx1
|
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
|
2016-06-20 08:57:08 -06:00 |
|
imx6
|
Centralize definitions associated with CONFIG_DEBUG_GPIO
|
2016-06-15 09:20:23 -06:00 |
|
kinetis
|
Kinetis:BugFix:i2c driver offset swapped for value in kinetis_i2c_putreg
|
2016-10-18 12:00:01 -10:00 |
|
kl
|
Merged in JordanMacIntyre/nuttx/PWM_driver (pull request #106)
|
2016-07-25 14:59:45 -06:00 |
|
lpc11xx
|
Rename LP11xx version of CONFIG_GPIO_IRQ to CONFIG_LPC11_GPIOIRQ
|
2016-07-22 14:23:31 -06:00 |
|
lpc17xx
|
Rename LP17xx version of CONFIG_GPIO_IRQ to CONFIG_LPC17_GPIOIRQ
|
2016-07-22 14:18:30 -06:00 |
|
lpc31xx
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
lpc43xx
|
There are some small problems in LPC43xx RS485 mode configuration. In particular: 1. UART0,2,3 do not have DTR pins (different from UART1), so, Kconfig needs to be adjusted. 2. lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't enable pin output for UART0,2,3. 3. should be option to reverse DIR control pin output polarity. 4. lpc43xx/chip/lpc43_uart.h doesn't have USART3 definitions. NOTE: I didn't modified and didn't tested USART1, as it has different hardware. From Vytautas Lukenskas.
|
2016-09-30 08:51:49 -06:00 |
|
lpc214x
|
Fix names of pre-processor variables used in header file idempotence
|
2016-08-06 18:48:45 -06:00 |
|
lpc2378
|
Fix names of pre-processor variables used in header file idempotence
|
2016-08-06 18:48:45 -06:00 |
|
moxart
|
Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.
|
2016-06-16 16:30:45 -06:00 |
|
nuc1xx
|
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
|
2016-06-20 11:59:15 -06:00 |
|
sam34
|
SAM Watchdog: Register the watchdog device at the configured device path CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt
|
2016-10-21 07:09:20 -06:00 |
|
sama5
|
SAM Watchdog: Register the watchdog device at the configured device path CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt
|
2016-10-21 07:09:20 -06:00 |
|
samdl
|
Missed a few *llinfo() to *info() conversions
|
2016-06-20 16:24:09 -06:00 |
|
samv7
|
SAM Watchdog: Register the watchdog device at the configured device path CONFIG_WATCHDOG_DEVPATH vs. hard-coded /dev/wdt
|
2016-10-21 07:09:20 -06:00 |
|
stm32
|
add tim8 to stm32f103v pinmap
|
2016-10-19 16:34:07 +02:00 |
|
stm32f7
|
Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not present in RMII
|
2016-09-22 10:05:45 +02:00 |
|
stm32l4
|
Trivial stylistic changes from review of last PR
|
2016-10-14 11:12:49 -06:00 |
|
str71x
|
Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces.
|
2016-06-20 08:57:08 -06:00 |
|
tiva
|
Add a new ioctl command (set MAXPOS) for tiva QEI
|
2016-09-26 18:10:06 +08:00 |
|
tms570
|
Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err().
|
2016-06-20 12:44:38 -06:00 |
|
.gitignore
|
|
|
|
Makefile
|
|
|
