| .. |
|
chip
|
Add EXTI line definitions for the STM32L family.
|
2015-05-09 09:03:14 -06:00 |
|
chip.h
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
Kconfig
|
Adds support for STM32F302K8 and STM32F302K6. From Ben Dyer via PX4/David Sidrane.
|
2015-05-08 14:10:55 -06:00 |
|
Make.defs
|
STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.
|
2015-04-28 06:37:59 -06:00 |
|
stm32_adc.c
|
STM32 PWM and ADC: Add some bits that should have been cleared. From Martin Lederhilger
|
2013-10-24 08:27:09 -06:00 |
|
stm32_adc.h
|
Many STM32 header files updated for F3 support
|
2013-02-10 19:07:13 +00:00 |
|
stm32_aes.c
|
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
|
2015-02-04 06:49:05 -06:00 |
|
stm32_aes.h
|
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
|
2015-02-04 06:49:05 -06:00 |
|
stm32_allocateheap.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_bbsram.c
|
Cosmetic changes
|
2015-05-05 06:42:58 -06:00 |
|
stm32_bbsram.h
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
|
stm32_bkp.h
|
ST3210E-EVAL: Add power management configuration; move all linker scripts to common files
|
2012-06-28 00:48:00 +00:00 |
|
stm32_can.c
|
STM32 CAN: More places where FR instead FIR used
|
2015-04-09 19:30:19 -06:00 |
|
stm32_can.h
|
Leverage some bit timing logic from LPC17xx to the STM32 CAN driver
|
2012-01-20 03:37:29 +00:00 |
|
stm32_ccm.c
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
|
stm32_ccm.h
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
|
stm32_dac.c
|
More DAC changes from John Wharington
|
2013-07-30 11:41:53 -06:00 |
|
stm32_dac.h
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
stm32_dbgmcu.h
|
Email address change in nuttx/
|
2012-09-13 18:32:24 +00:00 |
|
stm32_dma2d.c
|
STM32 DMA2D: Use helper function when freeing layers. From Marco Krahl
|
2015-04-16 11:16:14 -06:00 |
|
stm32_dma2d.h
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
|
stm32_dma.c
|
STM32L15X UART, DMA, and heap initialization support
|
2013-05-19 11:54:56 -06:00 |
|
stm32_dma.h
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
stm32_dumpgpio.c
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
stm32_eth.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_eth.h
|
Move some PHY initialization logic for Darcy
|
2012-11-22 14:44:38 +00:00 |
|
stm32_exti_alarm.c
|
Make name of RTC ALARM interrupt common on STM32 F1,2,4
|
2012-07-19 14:33:14 +00:00 |
|
stm32_exti_gpio.c
|
Disabling any of EXTI 5-9 interrupts was disabling interrupts for all EXTI 5-9. Same issue with EXTI 10-15. From Jussi Kivilinna.
|
2015-01-27 09:15:43 -06:00 |
|
stm32_exti_pwr.c
|
STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.
|
2015-04-28 06:37:59 -06:00 |
|
stm32_exti_pwr.h
|
STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.
|
2015-04-28 06:37:59 -06:00 |
|
stm32_exti.h
|
Add STM32 PM sleep support
|
2012-07-18 22:54:33 +00:00 |
|
stm32_flash.c
|
Adds support for STM32F302K8 and STM32F302K6. From Ben Dyer via PX4/David Sidrane.
|
2015-05-08 14:10:55 -06:00 |
|
stm32_flash.h
|
More STM3240 header file changes
|
2011-11-21 14:25:38 +00:00 |
|
stm32_fsmc.h
|
Support for the STM32F429 from Ken Pettit
|
2013-11-07 16:47:43 -06:00 |
|
stm32_gpio.c
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
stm32_gpio.h
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
stm32_i2c_alt.c
|
Adds the ability to use the STM32F2 and STM32F4 Battery Backedup SRAM in the file system. With an option to Save Panic context to one of the files. From David Sidrane.
|
2015-02-21 15:15:51 -06:00 |
|
stm32_i2c.c
|
stm32_i2c: Add missing NULL check. From Juha Niskanen
|
2015-03-12 07:53:41 -06:00 |
|
stm32_i2c.h
|
Add STM32 F3 I2C register definitions
|
2013-02-10 20:35:34 +00:00 |
|
stm32_idle.c
|
arch/: board function prototypes are now in include/nuttx/board.h. Remove from architecture header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 17:19:38 -06:00 |
|
stm32_irq.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_iwdg.c
|
STM32 PVD: Adds support for STM32's Programmable Voltage Detector feature. I put register access behind CONFIG_STM32_ENERGYLITE as have not checked F1/F2/F4 etc. manuals. Tested on STM32L1. PVD interrupt looks generic, at least #defines it needs are in headers for every chip variant. By Dmitry Nikolaev, submitted by Juha Niskanen.
|
2015-04-28 06:37:59 -06:00 |
|
stm32_lowputc.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_lowputc.h
|
Email address change in nuttx/
|
2012-09-13 18:32:24 +00:00 |
|
stm32_lse.c
|
Fix an error introduced into stm32_pwr_enablebkp(). That function must preserve the previous state of backup domain access on return.
|
2015-04-18 07:31:20 -06:00 |
|
stm32_lsi.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
|
stm32_ltdc.c
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
|
stm32_ltdc.h
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
|
stm32_mpuinit.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_mpuinit.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
stm32_otgfs.h
|
Integrates OTGHS support into the STM32; Eliminates the older OTGHS in FS mode logic. From Brennan Ashton
|
2014-10-07 15:05:30 -06:00 |
|
stm32_otgfsdev.c
|
STM32 USB device. Add protection in the event that out-of-bound enpoint numbers are received. From David Sidrane.
|
2015-05-02 10:58:27 -06:00 |
|
stm32_otgfshost.c
|
USB host drivers: Cannot take semaphores in cancel() method
|
2015-05-14 09:58:21 -06:00 |
|
stm32_otghs.h
|
Add files that implement true high speed support for the STM32 OTGHS peripheral. From Brennan Ashton
|
2014-10-07 15:01:42 -06:00 |
|
stm32_otghsdev.c
|
STM32 USB device. Add protection in the event that out-of-bound enpoint numbers are received. From David Sidrane.
|
2015-05-02 10:58:27 -06:00 |
|
stm32_otghshost.c
|
USB host drivers: Cannot take semaphores in cancel() method
|
2015-05-14 09:58:21 -06:00 |
|
stm32_pm.h
|
EFM32: Add IDLE power management hooks. Nothing implemented; just define the hooks
|
2014-10-22 07:26:31 -06:00 |
|
stm32_pminitialize.c
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
stm32_pmsleep.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
stm32_pmstandby.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
stm32_pmstop.c
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
stm32_procfs_ccm.c
|
Fixes for more issues found by cppcheck
|
2014-11-24 17:00:26 -06:00 |
|
stm32_pwm.c
|
Add support for the STM32152 and STM32162 Medium+ density parts (plus miscellaneous other improvements to the original STM32151 logic). From Jussi Kivilinna and Sami Pelkonen
|
2014-05-08 09:20:11 -06:00 |
|
stm32_pwm.h
|
Make STM32 F4 TIM pin naming consistent with F1
|
2012-01-06 21:25:27 +00:00 |
|
stm32_pwr.c
|
Correct description of some input parameters. Suggested by Pelle Windestam
|
2015-05-05 06:26:59 -06:00 |
|
stm32_pwr.h
|
Correct description of some input parameters. Suggested by Pelle Windestam
|
2015-05-05 06:26:59 -06:00 |
|
stm32_qencoder.c
|
Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()
|
2014-12-16 09:54:32 -06:00 |
|
stm32_qencoder.h
|
Ooops part of last checkin was still in the editor
|
2012-02-25 00:58:07 +00:00 |
|
stm32_rcc.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_rcc.h
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
stm32_rng.c
|
Misc changes for clean built od mikroe-stm32f4 configurations
|
2013-05-01 09:21:13 -06:00 |
|
stm32_rtc_lowerhalf.c
|
Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.
|
2015-04-01 12:37:44 -06:00 |
|
stm32_rtc.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
|
stm32_rtc.h
|
Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.
|
2015-04-01 12:37:44 -06:00 |
|
stm32_rtcc.c
|
Fix an error introduced into stm32_pwr_enablebkp(). That function must preserve the previous state of backup domain access on return.
|
2015-04-18 07:31:20 -06:00 |
|
stm32_rtcounter.c
|
STM32 RTC counter: Include enable/disable backup domain within critical section. Per recommendtion of Alexander Oryshchenko.
|
2015-04-21 18:08:31 -06:00 |
|
stm32_sdio.c
|
Two r's and only two r's in the word interrupt
|
2015-04-23 14:04:43 -06:00 |
|
stm32_sdio.h
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
stm32_serial.c
|
Cosmetic
|
2015-04-09 07:59:31 -06:00 |
|
stm32_spi.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_spi.h
|
Add missing SPI callback functions to the STM32 SPI driver. From Freddie Chopin
|
2015-03-04 06:52:46 -06:00 |
|
stm32_start.c
|
In go_os_start that sets the IDLE thread stack coloration, mov does not set condition codes which are tested by the following beq. Need to use movs instead. Noted by David Sidrane
|
2015-05-07 20:36:08 -06:00 |
|
stm32_syscfg.h
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
stm32_tim.c
|
Make sure that all references to up_prioritize_irq() are conditioned on CONFIG_ARCH_IRQPRIO. Noted by Make Smith
|
2014-05-20 17:48:39 -06:00 |
|
stm32_tim.h
|
Two r's and only two r's in the word interrupt
|
2015-04-23 14:04:43 -06:00 |
|
stm32_timerisr.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32_uart.h
|
Adds architecture support for the STM32F372 and F373 (no board support yet). Only tested on STM32F373CC, but should work on the rest. Contributed by Marten Svanfeldt.
|
2015-03-02 10:33:42 -06:00 |
|
stm32_usbdev.c
|
stm32: usbdev: Fix stale initialization invalidating later NULL check. From Juha Niskanen
|
2015-03-12 08:08:50 -06:00 |
|
stm32_usbdev.h
|
Email address change in nuttx/
|
2012-09-13 18:32:24 +00:00 |
|
stm32_usbhost.c
|
EFM32 USB host: Add missing trace data and some missing connection-related logic; update a configuration
|
2015-04-30 13:46:53 -06:00 |
|
stm32_usbhost.h
|
EFM32 USB host: Add missing trace data and some missing connection-related logic; update a configuration
|
2015-04-30 13:46:53 -06:00 |
|
stm32_userspace.c
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
stm32_userspace.h
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
stm32_vectors.S
|
STM32 changes from David Sidrane
|
2015-04-11 07:19:20 -06:00 |
|
stm32_waste.c
|
Add Uros' RCC actitivity counter to STM32 idle loop
|
2011-08-20 13:23:34 +00:00 |
|
stm32_waste.h
|
More trailing whilespace removal
|
2014-04-13 16:22:22 -06:00 |
|
stm32_wdg.h
|
LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks
|
2013-12-05 10:37:55 -06:00 |
|
stm32_wwdg.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
|
stm32.h
|
Unify sensor debug. ADX driver was using input debug; LM75 and QENCODE that their own custom debug. Now all use CONFIG_DEBUG_SENSOR, sndbg()
|
2014-12-16 09:54:32 -06:00 |
|
stm32f10xxx_dma.c
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
stm32f10xxx_rcc.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
|
stm32f20xxx_dma.c
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
stm32f20xxx_rcc.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
|
stm32f30xxx_i2c.c
|
Two r's and only two r's in the word interrupt
|
2015-04-23 14:04:43 -06:00 |
|
stm32f30xxx_rcc.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
|
stm32f37xxx_rcc.c
|
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
|
2015-03-29 15:34:48 -06:00 |
|
stm32f40xxx_dma.c
|
Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h
|
2014-08-08 17:53:55 -06:00 |
|
stm32f40xxx_rcc.c
|
Defines a second interface for the dma2d controller. Controlling both LTDC and DMA2D was unpractical from the programmers view because both controllers are to different. LTDC only controls the display visibility but the DMA2D controller changes the content of the frame buffer (buffer of the layer).
|
2015-04-16 09:11:52 -06:00 |
|
stm32l15xxx_rcc.c
|
Make some file section headers more consistent with standard
|
2015-04-08 08:04:12 -06:00 |
