Gregory Nutt 31e1e7506a USB MSC host class driver: Don't bother retrying to initialize the FLASH if the interface is returning fatal transfer errors

2013-09-09 10:00:16 -06:00

..

chip

SAMA5 UDPHS: Fix DMA channel vs. matching endpoint

2013-09-04 15:08:19 -06:00

chip.h

A few more SAMA5D3 files

2013-07-19 17:45:28 -06:00

Kconfig

SAMA UDPHS: Add pull-up and stall logic. Added to build system but does not yet build

2013-08-31 17:37:51 -06:00

Make.defs

SAMA UDPHS: Add pull-up and stall logic. Added to build system but does not yet build

2013-08-31 17:37:51 -06:00

sam_allocateheap.c

SAMA5: Fixes a bug in the way that the heap regions were being allocated

2013-08-27 16:43:19 -06:00

sam_boot.c

Fix all occurrences of "the the" in documentation and comments

2013-08-27 09:40:19 -06:00

sam_clockconfig.c

SAMA5 UDPHS: Support USPHS clock configuration

2013-09-01 11:29:51 -06:00

sam_clockconfig.h

SAMA5: Add file structure to support board-specific initialization of NOR flash

2013-07-29 07:41:53 -06:00

sam_dmac.c

SAMA5D3x-EK: Add a new 'demo' configuration

2013-09-06 11:40:46 -06:00

sam_dmac.h

SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers

2013-08-09 13:12:16 -06:00

sam_ehci.c

Trivial updates assocaited with USB host mass storage and SAMA5 EHCI

2013-09-08 13:42:56 -06:00

sam_hsmci.c

SAMA5: Alternatie clock configuration that yields a perfect 48MHz full speed USB clock and a CPU clock of 384MHz

2013-08-14 15:16:04 -06:00

sam_hsmci.h

SAMA5: Add HSMCI memory card driver support

2013-08-05 16:21:24 -06:00

sam_irq.c

SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts

2013-08-06 10:20:17 -06:00

sam_irq.h

SAMA5 interrupt handling logic

2013-07-22 11:54:39 -06:00

sam_lowputc.c

SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts

2013-08-06 10:20:17 -06:00

sam_lowputc.h

SAMA5 interrupt handling logic

2013-07-22 11:54:39 -06:00

sam_memories.c

SAMA5 OHCI: Fix errors in cache handling; Don't add ED to control list until port is connected

2013-08-15 15:28:27 -06:00

sam_memories.h

SAMA5 OHCI: Use physical address and flush and/or invalidate data caches as necessary

2013-08-14 12:23:06 -06:00

sam_ohci.c

USB MSC host class driver: Don't bother retrying to initialize the FLASH if the interface is returning fatal transfer errors

2013-09-09 10:00:16 -06:00

sam_periphclks.h

SAMA5 UDPHS: Support USPHS clock configuration

2013-09-01 11:29:51 -06:00

sam_pio.c

SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts

2013-08-06 10:20:17 -06:00

sam_pio.h

SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts

2013-08-06 10:20:17 -06:00

sam_pioirq.c

SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts

2013-08-06 10:20:17 -06:00

sam_serial.c

SAMA5: Major restructuring of the the OHCI driver drivers to better handle the multiple root hub ports and concureent transfers on each port.

2013-08-13 16:48:14 -06:00

sam_serial.h

Standard configuration variables used to enable interupt controller debug; SAMA5: Correct handling of spurious interrupts

2013-08-03 08:22:37 -06:00

sam_spi.c

SAMA5: Centralize logic for conversion between physical and virtual addresses

2013-08-09 17:25:53 -06:00

sam_spi.h

SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts

2013-08-06 10:20:17 -06:00

sam_timerisr.c

Fix Cortex-A CPSR register field definition

2013-07-30 19:05:24 -06:00

sam_udphs.c

CDC/ACM and PL2303 device drivers: Don't use the max packet size assigned to an endpoint in order to determine the request buffer size. The endpoint has not yet been configured that max packet size may be wrong.

2013-09-05 18:00:16 -06:00

sam_udphs.h

SAMA UDPHS: Add pull-up and stall logic. Added to build system but does not yet build

2013-08-31 17:37:51 -06:00

sam_usbhost.h

SAMA5: EHCI now handles low- and full-speed connections by giving them to OHCI; OHCI now uses the work queue to defer interrupt processing; If both OHCI and EHCI are enabled, EHCI is the master of the UHPHS interrupt

2013-08-24 11:34:24 -06:00