nuttx

arch/: Remove dangling space at the end of lines.

2017-06-28 13:16:48 -06:00

chip.h

SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer

2015-03-28 13:09:01 -06:00

Kconfig

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

Make.defs

arch/arm/src/armv7-m/up_trigger_irq.c: Add logic to trigger ARMv7-M interrupts and exceptions.

2018-08-25 10:23:21 -06:00

sam_allocateheap.c

arch/: Fix an error found in build testing. The protoype of mpu_log2regionfloor() changed; an additional parameter was added. However, none of the calls to mpu_log2regionfloor() were updated to pass the new, additional parameter.

2018-08-24 16:40:37 -06:00

sam_clockconfig.c

SAMV71 and SAME70: Place the Main Oscillator Enable in the board.h

2016-03-04 12:31:54 -06:00

sam_clockconfig.h

SAMV7 USB: USB must be enabled before PMC 480MHz clock is enabled

2015-08-11 15:48:26 -06:00

sam_config.h

arch/arm/src/samv7/sam_lowputc.c: Fix undefined variable when using USART1 for other purposes than UART (e.g. SPI).

2018-01-26 07:52:45 -06:00

sam_dac.c

Squashed commit of the following:

2017-09-30 11:51:37 -06:00

sam_dac.h

Add support for SAMV7 DACC module

2016-08-15 08:00:36 -06:00

sam_emac.c

Rename devif_loopback_out to devi_loopback

2018-08-25 08:33:21 -06:00

sam_ethernet.c

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

sam_ethernet.h

Standardization of some function headers.

2018-03-13 09:52:27 -06:00

sam_freerun.c

Revert "sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error."

2016-08-17 12:34:54 -06:00

sam_freerun.h

SAM3/4, SAMA5, SAMv7 Tickless: Refuse to call lower-level timer logic if not yet initialized

2016-02-05 10:22:11 -06:00

sam_gpio.c

SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7

2016-09-20 15:33:31 -06:00

sam_gpio.h

Centralize definitions associated with CONFIG_DEBUG_GPIO

2016-06-15 09:20:23 -06:00

sam_gpioirq.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_hsmci_clkdiv.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_hsmci.c

Fix lots of typos in C comments and Kconfig help text

2018-07-08 18:24:45 -06:00

sam_hsmci.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_irq.c

ARM: Remove redundant interrupt stack coloring

2017-03-16 19:13:39 +08:00

sam_lowputc.c

arch/arm/src/samv7/sam_lowputc.c: Fix undefined variable when using USART1 for other purposes than UART (e.g. SPI).

2018-01-26 07:52:45 -06:00

sam_lowputc.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_mcan.c

arch/arm/src/samv7/sam_mcan.c: Correct an error in the BUS_OFF reporting. In case of BUS_OFF the old implementation was leading to a package storm. Now it reports the error condition BUS_OFF only once.

2018-07-23 08:21:06 -06:00

sam_mcan.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_mpuinit.c

Trivial fix of two typos

2018-03-13 16:39:36 -06:00

sam_mpuinit.h

Rename CONFIG_ARMV7M_MPU to CONFIG_ARM_MPU so that we can reuse the configuration settings for the ARMV7R MPU

2015-12-14 13:56:21 -06:00

sam_oneshot_lowerhalf.c

Add a simulated oneshot lowerhalf driver

2016-08-12 13:14:03 -06:00

sam_oneshot.c

Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.

2017-05-11 13:35:56 -06:00

sam_oneshot.h

SAMV7: Add option to support oneshot timer without free-running timer. Add oneshot lower half driver.

2016-08-11 16:27:01 -06:00

sam_pck.c

Add _ to the beginning of all debug macros to avoid name collisions

2016-06-16 12:33:32 -06:00

sam_pck.h

SAMV7: Extend programmable clock support for queries about the PCK configuration

2015-12-03 14:11:39 -06:00

sam_periphclks.h

arch/arm/src/samv7: Add SAME70 memory map

2015-11-14 12:01:28 -06:00

sam_progmem.c

progmem interface: Discern r/w and erase page sizes. Introduce new up_progmem_erasesize architecture API to be able to communicate the read/write page size independently from erase page size. Implement up_progmem_erasesize for all architectures that already support progmem, assuming that for those architectures the sizes of both read/write and erase pages are identical.

2018-05-01 06:23:52 -06:00

sam_progmem.h

SAMV7 flash logic is complete, uncompiled, and untested

2015-11-12 10:46:59 -06:00

sam_qspi.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_qspi.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_rswdt.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_serial.c

Adapt some drivers to utilize the IRQ argument feature.

2017-02-27 20:54:18 -06:00

sam_spi_slave.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_spi.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_spi.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_ssc.c

Replace all ASSERT with DEBUGASSERT to save the code space

2018-08-24 06:58:30 -06:00

sam_ssc.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_start.c

Squashed commit of the following:

2018-06-20 12:30:37 -06:00

sam_start.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_systemreset.c

Restore PR. I have no idea where it went.

2016-05-23 17:45:15 -06:00

sam_tc.c

Squashed commit of the following:

2017-10-04 15:22:27 -06:00

sam_tc.h

Revert "sam_tc_clockselect() reworked to calculate frequency error using smallest possible divisor minimizing the frequency error rather than largest possible divisor which maximized the error."

2016-08-17 12:34:54 -06:00

sam_tickless.c

Replace non critical PANIC with DEBUGPANIC to save the code space

2018-08-24 06:21:15 -06:00

sam_timerisr.c

irq_dispatch: Add argument pointer to irq_dispatch

2017-02-27 06:27:56 -06:00

sam_trng.c

Squashed commit of the following:

2017-10-04 15:22:27 -06:00

sam_trng.h

SAMV7: Port SAMAD5 TRNG driver to the SAMV7

2015-12-06 08:53:31 -06:00

sam_twihs.c

include/nuttx/i2c/i2c_master.h: Rename I2C_M_NORESTART to I2C_M_NOSTART since it may be used in other contexts than a repeated start. Add comments to clarilfy setup for repeated start.

2018-08-03 08:51:55 -06:00

sam_twihs.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_usbdev.h

…

sam_usbdevhs.c

Make sure that labeling is used consistently in all function headers (part 2).

2018-02-01 12:03:55 -06:00

sam_userspace.c

SAMV7 protected mode: Don't enable D-Cache until userspace data has been initialized

2015-11-07 09:35:23 -06:00

sam_userspace.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_wdt.c

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_wdt.h

Make sure that labeling is used consistently in all function headers.

2018-02-01 10:00:02 -06:00

sam_xdmac.c

Squashed commit of the following:

2018-05-21 11:46:16 -06:00

sam_xdmac.h

Change *err() to either info() or err(ERROR:..), depending upon if an error has occurred.

2016-06-16 15:10:57 -06:00

same70_periphclks.h

arch/arm/src/samv7: Add SAME70 memory map

2015-11-14 12:01:28 -06:00

samv71_periphclks.h

arch/arm/src/samv7: Add support for SAME70 peripheral clocks

2015-11-14 11:41:53 -06:00