nuttx

History

Gregory Nutt 653ff2c34e Restore lib_sprintf(). It was removed because I thought was not used. But I was wrong; there is logic in drivers/syslog that depends on lib_sprintf().

This commits reverts a part of commit c271151d570e3ec394a45a78a81631c8c0328d92.  That commit also removed lib_sscanf() which really is not needed.

2019-02-16 12:29:00 -06:00

1wire

…

analog

drivers/analog/lmp92001.c: Add support for the TI LMP92001 device.

2018-12-21 09:46:33 -06:00

audio

Fixes warnings from header files:

2018-11-09 09:10:28 -06:00

binfmt

binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes.

2019-01-26 11:34:40 -06:00

can

…

contactless

…

crypto

This change:

2018-12-19 08:42:48 -06:00

drivers

Merged in raiden00/nuttx_pe (pull request #779 )

2018-12-09 16:31:57 +00:00

eeprom

drivers/eeprom/i2c_xx24xx.c and include/nuttx/eeprom/i2c_xx24xx.h: Add support to Microchip AT24CM02

2018-12-30 11:20:03 -06:00

Fix condition logic: The setup seems to support a network without sockets. That is not the case.

2019-02-11 15:47:25 -06:00

i2c

include/nuttx/i2c/i2c_master.h: Fix a small typo.

2018-12-07 18:53:57 -06:00

input

drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD

2019-01-27 08:53:12 -06:00

ioexpander

sched/signal and related changes to other OS subsystems.

2019-01-27 09:28:59 -06:00

lcd

drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD

2019-01-27 08:53:12 -06:00

leds

…

lib

binfmt/libelf, libs/libc/modlib: Optimize elf load speed: (1) Don't zero out memory, (2) Reduce the initial buffer size to 32 bytes.

2019-01-26 11:34:40 -06:00

mm/iob/iob_notifier.c: Don't check iob_navail in iob_notifier_setup to avoid a potential race condition.

2019-01-26 09:43:54 -06:00

modem

…

mtd

Extends the MTD configdata device with the following features / additions:

2018-12-20 14:14:40 -06:00

net

Fix condition logic: The setup seems to support a network without sockets. That is not the case.

2019-02-11 15:47:25 -06:00

include/nuttx/nx/nxmu.h: This header file coul be lethal; it declared an #error if CONFIG_DISABLE_MQUEUE=y.

2019-02-04 18:45:09 -06:00

power

drivers/power/pm_activity.c: Add pm_staycount API for get stay numbers. This function is currently not used and a waste of FLASH space.

2019-01-27 11:19:26 -06:00

sensors

drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD

2019-01-27 08:53:12 -06:00

serial

include/nuttx/serial/uart_16550.h: Fix warning: 'struct file' declared inside parameter list.

2019-01-27 11:22:40 -06:00

spi

Merged in raiden00/nuttx_lora (pull request #821 )

2019-01-20 13:03:11 +00:00

syslog

Squashed commit of the following:

2019-02-04 16:20:35 -06:00

timers

drivers/timers/timer.c: Support the signal notification through SIGEV_THREAD

2019-01-28 06:32:27 -06:00

usb

Updates from coding standard review of PRs 753 and 754

2018-11-09 07:44:22 -06:00

video

…

wireless

drivers/timers/oneshot.c: Support signal notification through SIGEV_THREAD

2019-01-27 08:53:12 -06:00

.gitignore

…

addrenv.h

…

arch.h

Critical Section Monitor (sched/ and fs/procfs: Remove SCHED_IRQMONITOR_GETTIME to simplify the clock source selection: (1) Use up_critmon_gettime if SCHED_IRQMONITOR, (2) Call clock_systimespec if SCHED_TICKLESS, (3) Don't collect timing info for all other cases and move up_critmon_* to arch.h avoid the duplicated declaration.

2019-01-27 10:13:28 -06:00

ascii.h

…

board.h

graphics/nxmu/nxmu_start.c: Fix a naming collision introduced with the last commit. Ye olde nx_start that started the NX graphics is now nxmu_start().

2019-02-04 16:51:48 -06:00

cancelpt.h

…

clock.h

ched/clock/: Remove g_monotonic_basetime and g_clock_monotonic_time since we don't need ensure monotonic time start from zero as state here: http://pubs.opengroup.org/onlinepubs/009696899/functions/clock_getres.html

2018-11-12 06:50:37 -06:00

compiler.h

include/nuttx/compiler.h: Correct support of C-version-specific features. Cannot depend on GCC version because -std=c89 may be used on comomand line. Need instead to use __STDC_VERSION__ to determine if a feature is supported. Also add conditional support inline, depending on C99.

2019-01-09 15:39:54 -06:00

elf.h

include/nuttx/elf.h: I forgot to add this header file that was introduced in a preceding commiti 095e28d45e3362613ab54697e19c4764347b8466.

2019-01-26 11:56:49 -06:00

environ.h

…

envpath.h

binfmt/ and libs/libc: Make exepath_*() more common:

2018-11-08 07:27:14 -06:00

init.h

Squashed commit of the following:

2019-02-04 16:20:35 -06:00

irq.h

include/nuttx/irq.h: Fix enter_critical_section/spin_lock_irqsave macro typo error and remove the duplicated inclusion of arch/irq.h

2019-01-27 11:21:03 -06:00

kmalloc.h

…

kthread.h

…

list.h

include/nuttx/list.h: Fix some typos.

2019-01-29 07:37:22 -06:00

mmcsd.h

…

module.h

…

mqueue.h

nuttx/sched/mqueue: Change 'int prio' to 'unsigned int prio'. According to open group specification, priority field in mq_* functions should have unsigned type: http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/mqueue.h.html

2019-02-15 19:18:55 -06:00

mutex.h

…

nuttx.h

…

page.h

…

pgalloc.h

mm/mm_gran: Add a function to get information about the state of the granuale allocator.

2017-11-14 14:41:03 -06:00

poff.h

…

progmem.h

Merged in ebsong/nuttx (pull request #722 )

2018-09-21 03:18:38 +00:00

pthread.h

…

random.h

…

sched_note.h

…

sched.h

Fix condition logic: The setup seems to support a network without sockets. That is not the case.

2019-02-11 15:47:25 -06:00

scsi.h

…

sdio.h

This commit adds a new function arch_invalidate_dcache_by_addr(). It takes the same parameters as arch_invalidate_dcache(), but performs invalidation of only the lines in cache that need to be invalidated. This new function could be used as a a direct replacement for arch_invalidate_dcache().

2018-11-20 14:03:42 -06:00

semaphore.h

include/nutt: Fix definitions used to access OS functions within the libraries. In the FLAT build, we must always set the errno and/or create cancellation points because the same library functions are used within the OS as are used by applications. This could cause issues for the OS but corrects some problems at the user interface.

2018-09-26 06:58:08 -06:00

signal.h

sched/signal and related changes to other OS subsystems.

2019-01-27 09:28:59 -06:00

spawn.h

…

spinlock.h

…

streams.h

Restore lib_sprintf(). It was removed because I thought was not used. But I was wrong; there is logic in drivers/syslog that depends on lib_sprintf().

2019-02-16 12:29:00 -06:00

symtab.h

arch/arm/src/samd2l2 serial: Fix SAMD2L2 serial driver it needs sam_usart_enable() to work

2019-01-26 12:51:51 -06:00

time.h

…

tls.h

…

tree.h

…

userspace.h

This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().

2019-02-04 13:42:51 -06:00

vt100.h

…

wdog.h

…

wqueue.h

sched/wqueue/kwork_notifier.c and several Kconfig files: Notifier should work with either lpwork or hpwork and other minor typo fix.

2019-01-27 11:02:56 -06:00

zoneinfo.h

…