8c00e43c1a
The eZ80F92 interrupt controller is very different from the eZ80F91. The eZ80F91 has: 1. Four byte interrupt vectors 2. The vector base address register is 16-bit so the vector table can lie in RAM Whereas the eZ80F92 has: 1. Two byte interrupt vectors 2. An 8-bit vector base address This means that the vectors must lie in the first 16-bits of FLASH and there must be a "trampoline" to get to interrupt handlers outside of the first 64-Kb of FLASH.
61 lines
1.5 KiB
Plaintext
61 lines
1.5 KiB
Plaintext
#
|
|
# This file is autogenerated: PLEASE DO NOT EDIT IT.
|
|
#
|
|
# You can use "make menuconfig" to make any modifications to the installed .config file.
|
|
# You can then do "make savedefconfig" to generate a new defconfig file that includes your
|
|
# modifications.
|
|
#
|
|
# CONFIG_MMCSD_HAVE_CARDDETECT is not set
|
|
# CONFIG_MMCSD_HAVE_WRITEPROTECT is not set
|
|
# CONFIG_MMCSD_MMCSUPPORT is not set
|
|
# CONFIG_SPI_CALLBACK is not set
|
|
CONFIG_ARCH="z80"
|
|
CONFIG_ARCH_BOARD="z20x"
|
|
CONFIG_ARCH_BOARD_Z20X=y
|
|
CONFIG_ARCH_CHIP="ez80"
|
|
CONFIG_ARCH_CHIP_EZ80=y
|
|
CONFIG_ARCH_CHIP_EZ80F92=y
|
|
CONFIG_ARCH_STACKDUMP=y
|
|
CONFIG_ARCH_Z80=y
|
|
CONFIG_BOARD_LOOPSPERMSEC=1250
|
|
CONFIG_BOOT_RUNFROMEXTSRAM=y
|
|
CONFIG_DISABLE_MQUEUE=y
|
|
CONFIG_EZ80_RTC=y
|
|
CONFIG_EZ80_SPI=y
|
|
CONFIG_EZ80_UART1=y
|
|
CONFIG_FAT_LCNAMES=y
|
|
CONFIG_FAT_LFN=y
|
|
CONFIG_FS_FAT=y
|
|
CONFIG_FS_PROCFS=y
|
|
CONFIG_HOST_WINDOWS=y
|
|
CONFIG_MAX_TASKS=16
|
|
CONFIG_MAX_WDOGPARMS=2
|
|
CONFIG_MMCSD=y
|
|
CONFIG_MMCSD_MULTIBLOCK_DISABLE=y
|
|
CONFIG_NFILE_DESCRIPTORS=8
|
|
CONFIG_NFILE_STREAMS=8
|
|
CONFIG_NSH_ARCHINIT=y
|
|
CONFIG_NSH_DISABLE_IFUPDOWN=y
|
|
CONFIG_NSH_FILEIOSIZE=512
|
|
CONFIG_NSH_LINELEN=64
|
|
CONFIG_NSH_READLINE=y
|
|
CONFIG_PREALLOC_TIMERS=4
|
|
CONFIG_PREALLOC_WDOGS=8
|
|
CONFIG_PTHREAD_STACK_DEFAULT=1024
|
|
CONFIG_RAM_SIZE=65536
|
|
CONFIG_RR_INTERVAL=200
|
|
CONFIG_RTC_ALARM=y
|
|
CONFIG_SCHED_HPWORK=y
|
|
CONFIG_SDCLONE_DISABLE=y
|
|
CONFIG_SPI=y
|
|
CONFIG_START_DAY=20
|
|
CONFIG_START_MONTH=2
|
|
CONFIG_START_YEAR=2020
|
|
CONFIG_SYSTEM_NSH=y
|
|
CONFIG_UART1_BITS=0
|
|
CONFIG_UART1_RXBUFSIZE=192
|
|
CONFIG_UART1_SERIAL_CONSOLE=y
|
|
CONFIG_UART1_TXBUFSIZE=64
|
|
CONFIG_USER_ENTRYPOINT="nsh_main"
|
|
CONFIG_WDOG_INTRESERVE=1
|