Dave Marples 173897afb9 This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.

2019-05-30 13:45:36 -06:00

..

Kconfig

This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.

2019-05-30 13:45:36 -06:00

Kconfig-16550

Squashed commit of the following:

2018-08-26 11:37:16 -06:00

Kconfig-lpuart

This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member.

2019-05-30 13:45:36 -06:00

Kconfig-sci

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-uart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

Kconfig-usart

drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4.

2018-03-14 10:33:27 -06:00

lowconsole.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

Make.defs

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

ptmx.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.c

Squashed commit of the following:

2019-05-21 18:57:54 -06:00

pty.h

…

serial_dma.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00

serial_io.c

drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.

2018-09-02 15:36:25 -06:00

serial.c

Cosmetic

2019-05-26 12:33:42 -06:00

tcdrain.c

Make sure that labeling is used consistently in all function headers (part 2).

2018-02-01 12:03:55 -06:00

uart_16550.c

drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.

2019-04-24 12:11:40 -06:00