sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
fae7e63479
nuttx/drivers/serial
History
Anjana fae7e63479 We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 
1. Serial (UART) driver (13 ports)
2. Ethernet driver

This port is provided on two boards
1. RSK RX65N-2MB
2. GR-Rose

The port is built on Cygwin environment.

As part of this port, we have created two documents
1. Readme.txt for each board
2. User manual to provide information about development environment setup
Both these documents are placed under
1. /boards/renesas/rx65n/rx65n-grrose
2. /boards/renesas/rx65n/rx65n-rsk2mb

We have run 'nxstyle' for coding guidelines and 'ostest' for testing NuttX features on test platform.
We have shared the log with no errors as confirmation of valid port.
2019-10-11 23:36:57 +08:00
..
Kconfig We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 2019-10-11 23:36:57 +08:00
Kconfig-16550 Squashed commit of the following: 2018-08-26 11:37:16 -06:00
Kconfig-lpuart This commit implements RS485 RX/TX switching and RTS/CTS flow control for the IMXRT family. It has been tested on 1020 but I don't see any reason for issues on any other family member. 2019-05-30 13:45:36 -06:00
Kconfig-sci We have ported NuttX on Renesas RX65N Micro-controller. This port includes following interfaces 2019-10-11 23:36:57 +08:00
Kconfig-uart drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4. 2018-03-14 10:33:27 -06:00
Kconfig-usart drivers/serial/Kconfig: Kconfig is too big, divide into Kconfig, Kconfig-uart, Kconfig-usart, Kconfig-sci, Kconfig-16550. More than one MCU supports LPUARTs. Add Kconfig-lpuart and remove MCU-specific LPUART definitions. Affects Kinetis and STM32L4. 2018-03-14 10:33:27 -06:00
lowconsole.c Squashed commit of the following: 2019-05-21 18:57:54 -06:00
Make.defs drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams. 2019-04-24 12:11:40 -06:00
ptmx.c Squashed commit of the following: 2019-05-21 18:57:54 -06:00
pty.c Squashed commit of the following: 2019-05-21 18:57:54 -06:00
pty.h
serial_dma.c drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams. 2019-04-24 12:11:40 -06:00
serial_io.c drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT. 2018-09-02 15:36:25 -06:00
serial.c drivers/serial/serial.c: Limit the number of times that the poll semaphore is incrmented. 2019-06-13 16:23:04 -06:00
tcdrain.c Make sure that labeling is used consistently in all function headers (part 2). 2018-02-01 12:03:55 -06:00
uart_16550.c drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams. 2019-04-24 12:11:40 -06:00