nuttx/boards/arm/samd5e5/metro-m4/include/board.h

461 lines
22 KiB
C
Raw Normal View History

This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
/************************************************************************************
Merged in alinjerpelea/nuttx (pull request #963) Move boards to boards folder * boards: rename configs folder to boards This is the proposed layout after the change: boards: - folder containing board folders <board>: - name of each board drivers: - extra drivers specific for platform include: - header files for the boars scripts: - extra scripts specific for platform src: - board specific code tools: - extra tools specific for platform <config>: - board specific configuration(s) Note: <xxx> names are dependent on platform This is a logical change to aim to the arch layout but this is a huge change it should be done in several steps to lower the risk. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Kconfig: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Makefile.*: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * Make.defs: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .sh: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .mk: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .c & .h: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * .bat: replace configs with boards The change is needed after the path change Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-05 14:04:14 +02:00
* boards/metro-m4/include/board.h
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
*
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
Merged in alinjerpelea/nuttx (pull request #966) group boards by architecture * z80: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risc-v: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arm: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * boards: group boards by architecture Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-06 16:37:27 +02:00
#ifndef __BOARDS_ARM_METRO_M4_INCLUDE_BOARD_H
#define __BOARDS_ARM_METRO_M4_INCLUDE_BOARD_H
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
#ifndef TRUE
# define TRUE 1
#endif
#ifndef FALSE
# define FALSE 0
#endif
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
/* Clocking *************************************************************************/
/* Overview
*
* Per the schematic Adafruit Metro M4 Pro has one on-board crystal:
*
* X4 32.768KHz XOSC32
*
* However, I have been unsuccessful using it and have fallen back to using OSCULP32K
* (Unless CONFIG_METRO_M4_32KHZXTAL=y)
*
* Since there is no high speed crystal, we will run from the OSC16M clock source.
*
* OSC48M Output = 48Mhz
* |
* FDLL Input = 48MHz
* | Output = 48MHz
* GCLK5 Input = 48MHz
* | Output = 2MHz
* DPLL0 Input = 2MHz
* | Output = 120MHz
* GCLK0 Input = 120MHz
* | Output = 120MHz
* MCK Input = 120MHz
* | Output = 120MHz
* CPU Input = 120MHz
*/
#define BOARD_OSC32K_FREQUENCY 32768 /* OSCULP32K frequency 32.768 KHz (nominal) */
#define BOARD_XOSC32K_FREQUENCY 32768 /* XOSC32K frequency 32.768 KHz */
#define BOARD_DFLL_FREQUENCY 48000000 /* FDLL frequency 28MHz */
#define BOARD_XOSC0_FREQUENCY 12000000 /* XOSC0 frequency 12MHz (disabled) */
#define BOARD_XOSC1_FREQUENCY 12000000 /* XOSC0 frequency 12MHz (disabled)*/
#define BOARD_DPLL0_FREQUENCY 120000000 /* DPLL0 output frueuency (120MHz) */
#define BOARD_DPLL1_FREQUENCY 47985664 /* DPLL1 output frequency (disabled) */
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
#define BOARD_GCLK0_FREQUENCY BOARD_DPLL0_FREQUENCY
#define BOARD_GCLK1_FREQUENCY BOARD_DFLL_FREQUENCY
#define BOARD_GCLK2_FREQUENCY (BOARD_XOSC32K_FREQUENCY / 4) /* Disabled */
#ifdef CONFIG_METRO_M4_32KHZXTAL
# define BOARD_GCLK3_FREQUENCY BOARD_XOSC32K_FREQUENCY /* Enabled */
#else
# define BOARD_GCLK3_FREQUENCY BOARD_OSC32K_FREQUENCY /* Always-on */
#endif
#define BOARD_GCLK4_FREQUENCY BOARD_DPLL0_FREQUENCY
#define BOARD_GCLK5_FREQUENCY (BOARD_DFLL_FREQUENCY / 24)
#define BOARD_GCLK6_FREQUENCY BOARD_XOSC1_FREQUENCY /* Disabled */
#define BOARD_GCLK7_FREQUENCY BOARD_XOSC1_FREQUENCY /* Disabled */
#define BOARD_GCLK8_FREQUENCY BOARD_XOSC1_FREQUENCY /* Disabled */
#define BOARD_GCLK9_FREQUENCY BOARD_XOSC1_FREQUENCY /* Disabled */
#define BOARD_GCLK10_FREQUENCY BOARD_XOSC1_FREQUENCY /* Disabled */
#define BOARD_GCLK11_FREQUENCY BOARD_XOSC1_FREQUENCY /* Disabled */
#define BOARD_CPU_FREQUENCY BOARD_GCLK0_FREQUENCY /* CPU frequency 120MHz */
/* XOSC32 */
#ifdef CONFIG_METRO_M4_32KHZXTAL
# define BOARD_HAVE_XOSC32K 1 /* 32.768 KHz XOSC32 crystal installed */
# define BOARD_XOSC32K_ENABLE TRUE /* Enable XOSC32 */
#else
# define BOARD_HAVE_XOSC32K 0 /* No 32.768 KHz XOSC32 crystal installed */
# define BOARD_XOSC32K_ENABLE FALSE /* Disable XOSC32 */
#endif
#define BOARD_XOSC32K_XTALEN TRUE /* Crystal connected on XIN32 */
#define BOARD_XOSC32K_EN32K FALSE /* No 32KHz output */
#define BOARD_XOSC32K_EN1K FALSE /* No 1KHz output */
#define BOARD_XOSC32K_HIGHSPEED TRUE /* High speed mode */
#define BOARD_XOSC32K_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_XOSC32K_ONDEMAND TRUE /* Enable on-demand control */
#define BOARD_XOSC32K_CFDEN FALSE /* Clock failure detector not enabled */
#define BOARD_XOSC32K_CFDEO FALSE /* No clock failure event */
#define BOARD_XOSC32K_CALIBEN FALSE /* No OSCULP32K calibration */
#define BOARD_XOSC32K_STARTUP 0 /* Startup time: 62592us */
#define BOARD_XOSC32K_CALIB 0 /* Dummy OSCULP32K calibration value */
#define BOARD_XOSC32K_RTCSEL 0 /* RTC clock = ULP1K */
/* XOSC0 */
#define BOARD_HAVE_XOSC0 0 /* No XOSC0 clock/crystal installed */
#define BOARD_XOSC0_ENABLE FALSE /* Don't enable XOSC0 */
#define BOARD_XOSC0_XTALEN FALSE /* External clock connected */
#define BOARD_XOSC0_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_XOSC0_ONDEMAND TRUE /* Disable on-demand control */
#define BOARD_XOSC0_LOWGAIN FALSE /* Disable low buffer gain */
#define BOARD_XOSC0_ENALC FALSE /* Disable automatic loop control */
#define BOARD_XOSC0_CFDEN FALSE /* Clock failure detector not enabled */
#define BOARD_XOSC0_SWBEN FALSE /* XOSC clock switch not enabled */
#define BOARD_XOSC0_STARTUP 0 /* XOSC0 start-up time 31µs */
/* XOSC1 */
#define BOARD_HAVE_XOSC1 0 /* No XOSC0 clock/crystal installed */
#define BOARD_XOSC1_ENABLE FALSE /* Don't enable XOSC1 */
#define BOARD_XOSC1_XTALEN TRUE /* External crystal connected */
#define BOARD_XOSC1_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_XOSC1_ONDEMAND TRUE /* Disable on-demand control */
#define BOARD_XOSC1_LOWGAIN FALSE /* Disable low buffer gain */
#define BOARD_XOSC1_ENALC FALSE /* Disable automatic loop control */
#define BOARD_XOSC1_CFDEN FALSE /* Clock failure detector not enabled */
#define BOARD_XOSC1_SWBEN FALSE /* XOSC clock switch not enabled */
#define BOARD_XOSC1_STARTUP 0 /* XOSC0 start-up time 31µs */
/* GCLK */
#define BOARD_GCLK_SET1 0x0020 /* Pre-configure: GCLK5 needed by DPLL0 */
#define BOARD_GCLK_SET2 0x0fdf /* Post-configure: All GCLKs except GCLK5 */
#define BOARD_GCLK0_ENABLE TRUE /* Enable GCLK0 */
#define BOARD_GCLK0_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK0_OE TRUE /* Generate output on GCLK_IO */
#define BOARD_GCLK0_DIVSEL 0 /* GCLK frequency is source/DIV */
#define BOARD_GCLK0_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK0_SOURCE 7 /* Select DPLL0 output as GCLK0 source */
#define BOARD_GCLK0_DIV 1 /* Division factor */
#define BOARD_GCLK1_ENABLE TRUE /* Enable GCLK1 */
#define BOARD_GCLK1_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK1_OE TRUE /* Generate output on GCLK_IO */
#define BOARD_GCLK1_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK1_SOURCE 6 /* Select DFLL output as GCLK1 source */
#define BOARD_GCLK1_DIV 1 /* Division factor */
#define BOARD_GCLK2_ENABLE FALSE /* Don't enable GCLK2 */
#define BOARD_GCLK2_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK2_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK2_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK2_SOURCE 1 /* Select XOSC1 as GCLK2 source */
#define BOARD_GCLK2_DIV 1 /* Division factor */
#define BOARD_GCLK3_ENABLE TRUE /* Enable GCLK3 */
#define BOARD_GCLK3_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK3_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK3_RUNSTDBY FALSE /* Don't run in standby */
#ifdef CONFIG_METRO_M4_32KHZXTAL
# define BOARD_GCLK3_SOURCE 5 /* Select XOSC32K as GCLK3 source */
#else
# define BOARD_GCLK3_SOURCE 4 /* Select OSCULP32K as GCLK3 source */
#endif
#define BOARD_GCLK3_DIV 1 /* Division factor */
#define BOARD_GCLK4_ENABLE TRUE /* Enable GCLK4 */
#define BOARD_GCLK4_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK4_OE TRUE /* Generate output on GCLK_IO */
#define BOARD_GCLK4_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK4_SOURCE 7 /* Select DPLL0 output as GCLK4 source */
#define BOARD_GCLK4_DIV 1 /* Division factor */
#define BOARD_GCLK5_ENABLE TRUE /* Enable GCLK5 */
#define BOARD_GCLK5_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK5_OE TRUE /* Generate output on GCLK_IO */
#define BOARD_GCLK5_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK5_SOURCE 6 /* Select DFLL output as GCLK5 source */
#define BOARD_GCLK5_DIV 24 /* Division factor */
#define BOARD_GCLK6_ENABLE FALSE /* Don't enable GCLK6 */
#define BOARD_GCLK6_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK6_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK6_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK6_SOURCE 1 /* Select XOSC1 as GCLK6 source */
#define BOARD_GCLK6_DIV 1 /* Division factor */
#define BOARD_GCLK7_ENABLE FALSE /* Don't enable GCLK7 */
#define BOARD_GCLK7_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK7_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK7_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK7_SOURCE 1 /* Select XOSC1 as GCLK7 source */
#define BOARD_GCLK7_DIV 1 /* Division factor */
#define BOARD_GCLK8_ENABLE FALSE /* Don't enable GCLK8 */
#define BOARD_GCLK8_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK8_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK8_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK8_SOURCE 1 /* Select XOSC1 as GCLK8 source */
#define BOARD_GCLK8_DIV 1 /* Division factor */
#define BOARD_GCLK9_ENABLE FALSE /* Don't enable GCLK9 */
#define BOARD_GCLK9_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK9_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK9_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK9_SOURCE 1 /* Select XOSC1 as GCLK9 source */
#define BOARD_GCLK9_DIV 1 /* Division factor */
#define BOARD_GCLK10_ENABLE FALSE /* Don't enable GCLK10 */
#define BOARD_GCLK10_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK10_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK10_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK10_SOURCE 1 /* Select XOSC1 as GCLK10 source */
#define BOARD_GCLK10_DIV 1 /* Division factor */
#define BOARD_GCLK11_ENABLE FALSE /* Don't enable GCLK11 */
#define BOARD_GCLK11_OOV FALSE /* Clock output will be LOW */
#define BOARD_GCLK11_OE FALSE /* No generator output of GCLK_IO */
#define BOARD_GCLK11_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_GCLK11_SOURCE 1 /* Select XOSC1 as GCLK11 source */
#define BOARD_GCLK11_DIV 1 /* Division factor */
#define BOARD_GCLK11_FREQUENCY BOARD_XOSC1_FREQUENCY
/* FDLL */
#define BOARD_DFLL_ENABLE TRUE /* DFLL enable */
#define BOARD_DFLL_RUNSTDBY FALSE /* Don't run in standby */
#define BOARD_DFLL_ONDEMAND FALSE /* No n-demand control */
#define BOARD_DFLL_MODE FALSE /* Open loop mode */
#define BOARD_DFLL_STABLE FALSE /* No stable DFLL frequency */
#define BOARD_DFLL_LLAW FALSE /* Don't ose lock after wake */
#define BOARD_DFLL_USBCRM TRUE /* Use USB clock recovery mode */
#define BOARD_DFLL_CCDIS TRUE /* Chill cycle disable */
#define BOARD_DFLL_QLDIS FALSE /* No Quick Lock Disable */
#define BOARD_DFLL_BPLCKC FALSE /* No ypass coarse clock */
#define BOARD_DFLL_WAITLOCK TRUE /* Wait lock */
#define BOARD_DFLL_CALIBEN FALSE /* Don't verwrite factory calibration */
#define BOARD_DFLL_GCLKLOCK FALSE /* Don't lock the GCLK source */
#define BOARD_DFLL_FCALIB 128 /* Coarse calibration value (if caliben) */
#define BOARD_DFLL_CCALIB (31 / 4) /* Fine calibration value (if caliben) */
#define BOARD_DFLL_FSTEP 1 /* Fine maximum step */
#define BOARD_DFLL_CSTEP 1 /* Coarse maximum step */
#define BOARD_DFLL_GCLK 3 /* GCLK source (if !usbcrm && !mode) */
#define BOARD_DFLL_MUL 0 /* DFLL multiply factor */
/* DPLL0/1
*
* Fckr is the frequency of the selected reference clock reference:
*
* BOARD_XOSC32K_FREQENCY,
* BOARD_XOSCn_FREQUENCY / DIV, or
* BOARD_GCLKn_FREQUENCY
*
* The DPLL output frequency is then given by:
*
* Fdpll = Fckr * (LDR + 1 + LDRFRAC / 32)
*
* DPLL0:
* Fckr = BOARD_GCLK5_FREQUENCY = BOARD_DFLL_FREQUENCY / 24 = 2MHz
* Fdpll = 2Mhz * (59 + 1 + 0 / 32) = 120MHz
*
* DPLL1: (not enabled)
* Fckr = BOARD_XOSCK32_FREQUENCY = 32.768KHz
* Fdpll = 32768 * (1463 + 1 + 13/32) = 47.986 MHz
*/
#define BOARD_DPLL0_ENABLE TRUE /* DPLL enable */
#define BOARD_DPLL0_DCOEN FALSE /* DCO filter enable */
#define BOARD_DPLL0_LBYPASS FALSE /* Lock bypass */
#define BOARD_DPLL0_WUF FALSE /* Wake up fast */
#define BOARD_DPLL0_RUNSTDBY FALSE /* Run in standby */
#define BOARD_DPLL0_ONDEMAND FALSE /* On demand clock activation */
#define BOARD_DPLL0_REFLOCK FALSE /* Do not lock reference clock section */
#define BOARD_DPLL0_REFCLK 0 /* Reference clock selection */
#define BOARD_DPLL0_LTIME 0 /* Lock time */
#define BOARD_DPLL0_FILTER 0 /* Proportional integer filter selection */
#define BOARD_DPLL0_DCOFILTER 0 /* Sigma-delta DCO filter selection */
#define BOARD_DPLL0_GCLK 5 /* GCLK source (if refclock == 0) */
#define BOARD_DPLL0_GCLKLOCK 0 /* Don't lock GCLK source clock configuration */
#define BOARD_DPLL0_LDRFRAC 0 /* Loop divider fractional part */
#define BOARD_DPLL0_LDRINT 59 /* Loop divider ratio */
#define BOARD_DPLL0_DIV 0 /* Clock divider */
#define BOARD_DPLL1_ENABLE FALSE /* DPLL enable */
#define BOARD_DPLL1_DCOEN FALSE /* DCO filter enable */
#define BOARD_DPLL1_LBYPASS FALSE /* Lock bypass */
#define BOARD_DPLL1_WUF FALSE /* Wake up fast */
#define BOARD_DPLL1_RUNSTDBY FALSE /* Run in standby */
#define BOARD_DPLL1_ONDEMAND FALSE /* On demand clock activation */
#define BOARD_DPLL1_REFLOCK FALSE /* Do not lock reference clock section */
#define BOARD_DPLL1_REFCLK 1 /* Reference clock = XOSCK32 */
#define BOARD_DPLL1_LTIME 0 /* Lock time */
#define BOARD_DPLL1_FILTER 0 /* Sigma-delta DCO filter selection */
#define BOARD_DPLL1_DCOFILTER 0 /* Sigma-delta DCO filter selection */
#define BOARD_DPLL1_GCLK 0 /* GCLK source (if refclock == 0) */
#define BOARD_DPLL1_GCLKLOCK 0 /* Don't lock GCLK source clock configuration */
#define BOARD_DPLL1_LDRFRAC 13 /* Loop divider fractional part */
#define BOARD_DPLL1_LDRINT 1463 /* Loop divider ratio */
#define BOARD_DPLL1_DIV 0 /* Clock divider */
/* Master Clock (MCLK)
*
* GCLK0 is always the direct source the GCLK_MAIN.
* CPU frequency = 120MHz / 1 = 120MHz
*/
#define BOARD_MCLK_CPUDIV 1 /* MCLK divder to get CPU frequency */
/* Peripheral clocking */
#define BOARD_GCLK_EIC 4 /* EIC GCLK index */
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
/* FLASH wait states
*
* Vdd Range Wait states Maximum Operating Frequency
* --------- ----------- ---------------------------
* > 2.7V 0 24 MHz
* 1 51 MHz
* 2 77 MHz
* 3 101 MHz
* 4 119 MHz
* 5 120 MHz
* >1.71V 0 22 MHz
* 1 44 MHz
* 2 67 MHz
* 3 89 MHz
* 4 111 MHz
* 5 120 MHz
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
*/
#define BOARD_FLASH_WAITSTATES 6
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
/* LED definitions ******************************************************************/
/* The Adafruit Metro M4 has four LEDs, but only two are controllable by software:
*
* 1. The red LED on the Arduino D13 pin, and
* 2. A NeoPixel RGB LED.
*
* Currently, only the red LED is supported.
*
* ------ ----------------- -----------
* SHIELD SAMD5E5 FUNCTION
* ------ ----------------- -----------
* D13 PA16 GPIO output
*/
/* LED index values for use with board_userled() */
#define BOARD_RED_LED 0
#define BOARD_NLEDS 1
/* LED bits for use with board_userled_all() */
#define BOARD_RED_LED_BIT (1 << BOARD_RED_LED)
/* This LED is not used by the board port unless CONFIG_ARCH_LEDS is
* defined. In that case, the usage by the board port is defined in
* include/board.h and src/sam_autoleds.c. The LEDs are used to encode
* OS-related events as follows:
*
* ------------------- ---------------------------- ------
* SYMBOL Meaning LED
* ------------------- ---------------------------- ------ */
#define LED_STARTED 0 /* NuttX has been started OFF */
#define LED_HEAPALLOCATE 0 /* Heap has been allocated OFF */
#define LED_IRQSENABLED 0 /* Interrupts enabled OFF */
#define LED_STACKCREATED 1 /* Idle stack created ON */
#define LED_INIRQ 2 /* In an interrupt N/C */
#define LED_SIGNAL 2 /* In a signal handler N/C */
#define LED_ASSERTION 2 /* An assertion failed N/C */
#define LED_PANIC 3 /* The system has crashed FLASH */
#undef LED_IDLE /* MCU is is sleep mode Not used */
/* Thus is LED is statically on, NuttX has successfully booted and is,
* apparently, running normally. If LED is flashing at approximately
* 2Hz, then a fatal error has been detected and the system has halted.
*/
/* Alternate function pin selections ************************************************/
/* SERCOM definitions ***************************************************************/
/* The SERCOM bus clock (CLK_SERCOMx_APB) can be enabled and disabled in the Main
* Clock Controller. The SERCOM uses two generic clocks: GCLK_SERCOMn_CORE and
* GCLK_SERCOM_SLOW. The core clock (GCLK_SERCOMx_CORE) is required to clock the
* SERCOM while working as a master. The slow clock (GCLK_SERCOM_SLOW) is only
* required for certain functions and is common to all SERCOM modules.
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
*
* These clocks must be configured and enabled in the Generic Clock Controller (GCLK)
* before using the SERCOM.
*/
2018-09-01 15:50:10 +02:00
#define BOARD_SERCOM_SLOWGEN 3 /* 32.768KHz, common to all SERCOMS */
#define BOARD_SERCOM_SLOWLOCK FALSE /* Don't lock the SLOWCLOCK */
#define BOARD_SLOWCLOCK_FREQUENCY BOARD_GCLK3_FREQUENCY
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
/* SERCOM3
*
* An Arduino compatible serial Shield is assumed (or equivalently, an external
* RS-232 or serial-to-USB adapter connected on Arduino pins D0 and D1):
*
* ------ ----------------- ---------
* SHIELD SAMD5E5 FUNCTION
* ------ ----------------- ---------
* D0 PA23 SERCOM3 PAD1 RXD
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
* D1 PA22 SERCOM3 PAD0 TXD
*
* NOTES:
* USART_CTRLA_TXPAD0_2: TxD=PAD0 XCK=N/A RTS/TE=PAD2 CTS=PAD3
* USART_CTRLA_RXPAD1: RxD=PAD1
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
*/
#define BOARD_SERCOM3_MUXCONFIG (USART_CTRLA_TXPAD0_2 | USART_CTRLA_RXPAD1)
#define BOARD_SERCOM3_PINMAP_PAD0 PORT_SERCOM3_PAD0_1 /* PAD0: USART TX */
#define BOARD_SERCOM3_PINMAP_PAD1 PORT_SERCOM3_PAD1_1 /* PAD1: USART RX */
#define BOARD_SERCOM3_PINMAP_PAD2 0 /* PAD2: (not used) */
#define BOARD_SERCOM3_PINMAP_PAD3 0 /* PAD3: (not used) */
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
#define BOARD_TXIRQ_SERCOM3 SAM_IRQ_SERCOM3_0 /* INTFLAG[0] DRE */
#define BOARD_RXIRQ_SERCOM3 SAM_IRQ_SERCOM3_2 /* INTFLAG[2] RXC */
#define BOARD_SERCOM3_COREGEN 1 /* 48MHz Core clock */
#define BOARD_SERCOM3_CORELOCK FALSE /* Don't lock the CORECLOCK */
#define BOARD_SERCOM3_FREQUENCY BOARD_GCLK1_FREQUENCY
This is the initial commit the port to the SAMD5x/E5x MCU family and also support for the Adafruit Metro M4 board. It port is untested and unfinished. It currently will not even link due to some missing clock related logic. Squashed commit of the following: arch/arm/src/samd5e5: Clean-up EIC logic. arch/arm/src/samd5e5: Fix some compilation issues; Still issues with the EIC logic from samd2x. arch/arm/src/samd5e5: Fix some compilation issues; bring in some EIC logic from samd2x. arch/arm/src/samd5e5: Add NVMCTRL header file, fix some compiler problems, misc. clean-up. configs/metro-m4: Add LED support. arch/arm/src/samd5e5: Bring in SAML21 clock configuration. This is a WIP; it cannot possible even compile yet. arch/arm/src/samd5e5: Leverage Cortex-M4 interrupt and SysTick logic from the SAM3/4. arch/arm/src/samd5e5: Add SERCOM utility function. arch/arm/src/samd5e5: Bring all SERCOM USART logic from SAMD2L2 to SAMD5E5. This is a brute coy with nothing more than more that name changes and extension from 5 to 7 SERCOMs. arch/arm/src/samd5e5: Add sam_config.h header file arch/arm/src/samd5e5/: Add Generic Clock (GCLK) utility functions. arch/arm/src/samd5e5: Add EVSYS register definition file arch/arm/src/samd5e5 and configs/metro-m4: Use SERCOM3 for the Arduino serial shield as console. arch/arm/src/samd5e5/chip: Add SERCOM USART, SPI, I2C master, and slave register defintions header files arch/arm/src/samd5e5/chip: Add AES, PM, TRNG, and WDT header files. arch/arm/src/samd5e5/chip: Add pin multiplexing header files. Various fixes to configuration system; fix metro-m4/nsh defconfig file. configs/metro-m4: Add initial support for the Adafruit Metro M4 board. arch/arm/src/samd5e5: Add peripheral clock helpers. arch/arm/src/samd5e5/chip: Add PAC register definition header file. Fix some errors in the memory map header file. arch/arm/src/samd5e5: Add chip.h headerf file. arch/arm/src/samd5e5: Add PORT register definitions and support from SAML21. arch/arm/include/samd5e5: Add interrupt vector definitions. arch/arm/src/samd5e5: Add some boilerplate files. Correct some typos. arch/arm/src/samd5e5/chip/sam_eic.h: Add EIC register definitions. arch/arm/src/samd5e5/chip: Add OSC32KCTRL and OSCCTRL register definitions. arch/arm/src/samd5e5/chip: Add GCLK, MCLK, and RSTC header files. arch/arm/src/samd5e5/chip/sam_cmcc.h: Add CMCC register definitions arch/arm/src/samd5e5/chip/sam_supc.h: Add SUPC header file. arch/arm/src/samd5e5: Add start-up logic. arch/arm/src/samd5e5: Add Make.defs file arch/arm/src/samd5e5/chip: Add memory map header file. arch/arm/include/samd5e5: Add chip.h header file. arch/arm/Kconfig and arch/arm/src/samd5e5/Kconfig: Add configuration logic for the SAMD5x/Ex family.
2018-07-26 20:08:58 +02:00
/* USB */
#define BOARD_USB_GCLKGEN 1 /* GCLK1, 48MHz */
Merged in alinjerpelea/nuttx (pull request #966) group boards by architecture * z80: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * z16: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * xtensa: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * x86: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * sim: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * risc-v: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * renesas: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * or1k: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * misoc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * mips: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * hc: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * avr: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * arm: group boards by architecture all boards that share the same architecture are moved to the same arch folder following the soc layout Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> * boards: group boards by architecture Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com> Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-06 16:37:27 +02:00
#endif /* __BOARDS_ARM_METRO_M4_INCLUDE_BOARD_H */