nuttx/arch/arm/include/stm32f0l0g0/stm32l0_irq.h

121 lines
6.3 KiB
C
Raw Normal View History

/****************************************************************************
* arch/arm/include/stm32f0l0g0/stm32l0_irq.h
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
*
* http://www.apache.org/licenses/LICENSE-2.0
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
*
****************************************************************************/
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/* This file should never be included directly but, rather,
* only indirectly through nuttx/irq.h
*/
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#ifndef __ARCH_ARM_INCLUDE_STM32F0L0G0_STM32L0_IRQ_H
#define __ARCH_ARM_INCLUDE_STM32F0L0G0_STM32L0_IRQ_H
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/****************************************************************************
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
* Included Files
****************************************************************************/
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#include <nuttx/config.h>
#include <nuttx/irq.h>
#include <arch/stm32f0l0g0/chip.h>
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/****************************************************************************
* Pre-processor Prototypes
****************************************************************************/
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/* IRQ numbers.
* The IRQ number corresponds vector number and hence map directly to
* bits in the NVIC. This does, however, waste several words of memory in
* the IRQ to handle mapping tables.
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
*
* Processor Exceptions (vectors 0-15). These common definitions
* can be found in nuttx/arch/arm/include/stm32f0l0g0/irq.h
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
*/
#define STM32_IRQ_WWDG (STM32_IRQ_EXTINT + 0) /* 0: Window Watchdog interrupt */
#define STM32_IRQ_PVD (STM32_IRQ_EXTINT + 1) /* 1: PVD through EXTI Line detection interrupt */
#define STM32_IRQ_RTC (STM32_IRQ_EXTINT + 2) /* 2: RTC global interrupt */
#define STM32_IRQ_FLASH (STM32_IRQ_EXTINT + 3) /* 3: Flash global interrupt */
#define STM32_IRQ_RCC_CRS (STM32_IRQ_EXTINT + 4) /* 4: RCC and CRS global interrupt */
#define STM32_IRQ_EXTI0_1 (STM32_IRQ_EXTINT + 5) /* 5: EXTI Line 0-1 interrupt */
#define STM32_IRQ_EXTI2_3 (STM32_IRQ_EXTINT + 6) /* 6: EXTI Line 2-3 interrupt */
#define STM32_IRQ_EXTI4_15 (STM32_IRQ_EXTINT + 7) /* 7: EXTI Line 4-15 interrupt */
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#define STM32_IRQ_TSC (STM32_IRQ_EXTINT + 8) /* 8: TSC global interrupt */
#define STM32_IRQ_DMA1CH1 (STM32_IRQ_EXTINT + 9) /* 9: DMA1 channel 1 global interrupt */
#define STM32_IRQ_DMA1CH2 (STM32_IRQ_EXTINT + 10) /* 10: DMA1 channel 2 global interrupt */
#define STM32_IRQ_DMA1CH3 (STM32_IRQ_EXTINT + 10) /* 10: DMA1 channel 3 global interrupt */
#define STM32_IRQ_DMA1CH4 (STM32_IRQ_EXTINT + 11) /* 11: DMA1 channel 4 global interrupt */
#define STM32_IRQ_DMA1CH5 (STM32_IRQ_EXTINT + 11) /* 11: DMA1 channel 5 global interrupt */
#define STM32_IRQ_DMA1CH6 (STM32_IRQ_EXTINT + 11) /* 11: DMA1 channel 6 global interrupt */
#define STM32_IRQ_DMA1CH7 (STM32_IRQ_EXTINT + 11) /* 11: DMA1 channel 7 global interrupt */
#define STM32_IRQ_ADC (STM32_IRQ_EXTINT + 12) /* 12: ADC global interrupt */
#define STM32_IRQ_COMP (STM32_IRQ_EXTINT + 12) /* 12: COMP global interrupt */
#define STM32_IRQ_LPTIM1 (STM32_IRQ_EXTINT + 13) /* 13: LPTIM1 global interrupt */
#define STM32_IRQ_USART4 (STM32_IRQ_EXTINT + 14) /* 14: USART4 global interrupt */
#define STM32_IRQ_USART5 (STM32_IRQ_EXTINT + 14) /* 14: USART5 global interrupt */
#define STM32_IRQ_TIM2 (STM32_IRQ_EXTINT + 15) /* 15: TIM2 global interrupt */
#define STM32_IRQ_TIM3 (STM32_IRQ_EXTINT + 16) /* 16: TIM3 global interrupt */
#define STM32_IRQ_TIM6 (STM32_IRQ_EXTINT + 17) /* 17: TIM6 global interrupt */
#define STM32_IRQ_DAC1 (STM32_IRQ_EXTINT + 17) /* 17: DAC1 global interrupts */
#define STM32_IRQ_TIM7 (STM32_IRQ_EXTINT + 18) /* 18: TIM7 global interrupt */
#define STM32_IRQ_RESERVED18 (STM32_IRQ_EXTINT + 18) /* 19: Reserved */
#define STM32_IRQ_TIM21 (STM32_IRQ_EXTINT + 20) /* 20: TIM21 global interrupt */
#define STM32_IRQ_I2C3 (STM32_IRQ_EXTINT + 21) /* 21: I2C3 global interrupt */
#define STM32_IRQ_TIM22 (STM32_IRQ_EXTINT + 22) /* 22: TIM22 global interrupt */
#define STM32_IRQ_I2C1 (STM32_IRQ_EXTINT + 23) /* 23: I2C1 global interrupt */
#define STM32_IRQ_I2C2 (STM32_IRQ_EXTINT + 24) /* 24: I2C2 global interrupt */
#define STM32_IRQ_SPI1 (STM32_IRQ_EXTINT + 25) /* 25: SPI1 global interrupt */
#define STM32_IRQ_SPI2 (STM32_IRQ_EXTINT + 26) /* 26: SPI2 global interrupt */
#define STM32_IRQ_USART1 (STM32_IRQ_EXTINT + 27) /* 27: USART1 global interrupt */
#define STM32_IRQ_USART2 (STM32_IRQ_EXTINT + 28) /* 28: USART2 global interrupt */
#define STM32_IRQ_LPUART1 (STM32_IRQ_EXTINT + 29) /* 29: LPUART1 global interrupt */
#define STM32_IRQ_AES (STM32_IRQ_EXTINT + 29) /* 29: AES global interrupt */
#define STM32_IRQ_RNG (STM32_IRQ_EXTINT + 29) /* 29: RNG global interrupt */
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#define STM32_IRQ_LCD (STM32_IRQ_EXTINT + 30) /* 30: LCD global interrupt */
#define STM32_IRQ_USB (STM32_IRQ_EXTINT + 31) /* 31: USB global interrupt */
#define STM32_IRQ_NEXTINT (32)
/****************************************************************************
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
* Public Types
****************************************************************************/
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
/****************************************************************************
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
* Public Data
****************************************************************************/
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#ifndef __ASSEMBLY__
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
2020-10-10 15:43:46 +02:00
* Public Functions Prototypes
****************************************************************************/
Brings in initial WIP support for the STML0. This initial commit is in pretty bad shape and, hence it it marked EXPERIMENTAL." Squashed commit of the following: arch/arm/src/stm32f0l0: Various changes for a clean compilation. Still does not compile correctly due to missing FLASH latency definitions. arch/arm/src/stm32f0l0/hardware: Add framework for the STM32 L0. Currently set to same as the STM32F0. arch/arm/src/stm32f0l0/hardware: Very fragmentary FLASH header register definitions for the STM32 L0. arch/arm/src/stm32f0l0: Bring in DMA v1. Cannot possibly be functionaly yet due to the limited number for M0 interrupts. arch/arm/src/stm32f0l0: Add STM32 F0/L0 LSE and backup power domain controls. arch/arm/src/stm32f0l0/hardware/stm32l0_pwr.h: Add STM32L0 PWR header file. arch/arm/include/stm32f0l0/chip.h: Clean up WIP chip header file. arch/arm/include/stm32f0l0/chip.h: WIP. arm/src/stm32f0l0: Resolve some small differences between F0 and L0 GPIO pin options. arch/arm/src/stm32f0l0: Better integrate STM32L0 header files. nuttx/arch/arm/include/stm32f0l0: Add STM32L0 IRQ number definition file. arch/arm/src/stm32f0l0: Add STM32L0 RCC driver. arch/arm/src/stm32f0l0/hardware: Adds basic STM32L0 header files. arch/arm/src/stm32f0l0: Add STM32L0 chip selections. configs/: Hook new STM32L0 boards into the configuration system. configs: nucleo boards use as default ST LINK MCO as clock input from MCU and for this HSEBYP must be enabled configs: add basic support for nucleo-l073rz configs: add basic support for b-l072z-lrwan1
2018-12-19 19:36:35 +01:00
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif
#endif /* __ARCH_ARM_INCLUDE_STM32F0L0G0_STM32L0_IRQ_H */