1.Move all special process to mm_takesemaphore
2.Remove the support of recurive lock
3.Remove mm_trysemaphore function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie216a6294ab67c5d427f31b089beb15c532f08fe
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
and remove mm_sbrk and kmm_sbrk since it's wrong to expose
sbrk to other heaps except the default userspace heap.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Root casue:
when do thread exit, need add free stack operation to mm_delaylist,
but in SMP mode, CPU0 thread1 exit, at this time, CPU1 call malloc
and free mm_delaylist.
Fix:
Divide mm_delaylist for per CPU in SMP mode.
Change-Id: Ibf7d04614ea2f99fb5b506356b7346a0d94f0590
Signed-off-by: ligd <liguiding1@xiaomi.com>
Broken by 635cfa.
On an stm32 the heap is formed from
const uintptr_t g_idle_topstack = HEAP_BASE;
where HEAP_BASE is &_bss + CONFIG_IDLE_STACKSIZE.
Both these values are not deterministic. One
comes from the compiler, the other the system
configurator.
a 3 byte bss and 250 byte stack would lead to
and unaligned address used as the heap to be.
The compiler used clever `strd r1,r3,[r5,#8]` to
store 2 values in one memory cycle into the
heap_impl struct. Resulting in a hardfault.
Change the amount of bss or the CONFIG_IDLE_STACKSIZE
could lead to a non-functional NuttX system.
Summary:
- This commit removes critical section in mm_sem.c which was
added to stabilize the NuttX SMP kernel in Mar 2018.
Impact:
- SMP only
Testing:
- Tested with ostest with the following configs
- maix-bit:smp (QEMU), esp32-devkitc:smp (QEMU)
- sabre-6quad:smp (QEMU), spresense:smp, sim:smp
- Tested with nxplayer with the following configs
- spresense:wifi_smp, spresense:rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
When realloc up from a mem area to a larger one where a new node
is needed. The the larger memory region is copied from the source
this can both leak data as well as cause memory faults accesssing
invalid data.
This was first reported by Kwonsk
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
This commit repartitions the logic by moving some of the changes from mm_sem.c into task_getpid.c. The logic is equivalent for the case of mm_trysemaphore(), but no has wider impact since it potentially affects all callers of getpid(). Hence, this change may also introduce some other issues that will need to be addressed.
This change adds a check to mm_trysemaphore() (the root implementation of both kmm_trysemaphore() and umm_trysemaphore()). It checks if the that task that is apparently executing is marked as RUNNING. If not, how could the non-running task be trying to get the MM semaphore? I think only in the exact scenario that Eunbong Song has described.
So I think the solution should provide the same protection as 91aa26774b but without the horrific consequences to memory usage.
Pullreq libc libnx updates
* NuttX: make strerror() return 'Success' for 0
* NuttX: fix strrchr() so that it considers null terminator as part of string
From strrchr(3) man page:
"The terminating null byte is considered part of the string, so that if c
is specified as '\0', these functions return a pointer to the terminator."
* NuttX: mm_free(): Add DEBUGASSERT()'s to catch memory corruption early.
It's easier to find the source when asserts fail already when freeing
an overflowed buffer, than if the corruption is only detected on next
malloc().
* MM_FILL_ALLOCATIONS: Add debug option to fill all mallocs()
This is helpful for detecting uninitialized variables,
especially in C++ code. I seem to be forgetting to initialize
member variables and then they just get random values..
* NuttX: nxtk_bitmapwindow: Fix warning message when bitmap is fully off-screen.
* nxfonts_getfont: Avoid unnecessary warnings for other whitespace chars also.
* NuttX: Fix kerning of 'I' in Sans17x22 font
The I character was running together with some other
characters, e.g. in sequence "IMI".
* NXMU: Revalidate window pointer for mouse events.
NXMU caches the previous window pointer so that further mouse
events can be sent to the same window. However, if the window
is destroyed while mouse button is held down, the pointer may
become invalid and cause a crash. This patch revalidates the
pointer before using it.
Approved-by: GregoryN <gnutt@nuttx.org>
Fix SMP related bugs
* sched/sched: Fix a deadlock in SMP mode
Two months ago, I introduced sched_tasklist_lock() and
sched_tasklist_unlock() to protect tasklists in SMP mode.
Actually, this change works pretty well for HTTP audio
streaming aging test with lc823450-xgevk.
However, I found a deadlock in the scheduler when I tried
similar aging tests with DVFS autonomous mode where CPU
clock speed changed based on cpu load. In this case, call
sequences were as follows;
cpu1: sched_unlock()->sched_mergepending()->sched_addreadytorun()->up_cpu_pause()
cpu0: sched_lock()->sched_mergepending()
To avoid this deadlock, I added sched_tasklist_unlock() when calling
up_cpu_pause() and sched_addreadytorun(). Also, added
sched_tasklist_lock() after the call.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* libc: Add critical section in lib_filesem.c for SMP
To set my_pid into fs_folder atomically in SMP mode,
critical section API must be used.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* mm: Add critical section in mm_sem.c for SMP
To set my_pid into mm_folder atomically in SMP mode,
critical section API must be used.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* net: Add critical section in net_lock.c for SMP
To set my pid (me) into fs_folder atomically in SMP mode,
critical section API must be used.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
binfmt/, configs/, grahics/, libc/, mm/, net/, sched/: OS references to the errno variable should always use the set_errno(), get_errno() macros
arch/arm/src/stm32 and stm32f7: Architecture-specific code is not permitted to modify the errno variable. drivers/ and libc/: OS references to the errno variable should always use the set_errno(), get_errno() macros
Replace all usage kill() in the OS proper with nxsig_kill().
sched/signal: Add nxsig_kill() which is functionally equivalent to kill() except that it does not modify the errno variable.
This commit backs out most of commit b4747286b1. That change was added because sem_wait() would sometimes cause cancellation points inappropriated. But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.
In the OS, all calls to sem_wait() changed to nxsem_wait(). nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.
In all OS functions (not libraries), change sem_wait() to nxsem_wait(). This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.
sched/semaphore: Add the function nxsem_wait(). This is a new internal OS interface. It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
