task_spawn() and posix_spawn() are NuttX OS interfaces. In PROTECTED and KERNEL build modes, then can be reached from applications only via a system call. Currently, the number of parameters in a system call is limited to six; these spawn function have seven parameters. Rather than extend the maximum number of parameters across all architectures, I opted instead to marshal the seven parameters into a structure.
*
In order to support builtin in function in protected mode, a task_spawn() system call must be supported. Unfortunately this is overly complex because there is a (soft) limit of 6 parameters in a system call; task_spawn has seven paramters. This is a soft limit but still difficult to extend because it involves assembly language changes to numerous architectures. Better to get more creative.
libs/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
syscall/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
wireless/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
Documentation/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
include/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
drivers/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
sched/: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
configs: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/xtensa: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/z80: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/x86: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/renesas and arch/risc-v: Remove references to CONFIG_DISABLE_SIGNALS. Signals can no longer be disabled.
arch/or1k: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/misoc: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/mips: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/avr: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
arch/arm: Remove all references to CONFIG_DISABLE_SIGNALS. Signals are always enabled.
Squashed commit of the following:
configs/: The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
fs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
tools/: Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
syscall/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
drivers/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
binfmt/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
arch/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
sched/Kconfig: CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
configs/: Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
Squashed commit of the following:
Trivial, cosmetic
sched/, arch/, and include: Rename task_vforkstart() as nxtask_vforkstart()
sched/, arch/, and include: Rename task_vforkabort() as nxtask_vforkabort()
sched/, arch/, and include: Rename task_vforksetup() as nxtask_vfork_setup()
sched/: Rename notify_cancellation() as nxnotify_cancellation()
sched/: Rename task_recover() to nxtask_recover()
sched/task, sched/pthread/, Documentation/: Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
sched/task: Rename task_schedsetup() to nxtask_schedsetup()
sched/ (plus some binfmt/, include/, and arch/): Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
arch/ and sched/: Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
sched/task: Rename all internal, static, functions to begin with the nx prefix.
This commit repartitions the logic by moving some of the changes from mm_sem.c into task_getpid.c. The logic is equivalent for the case of mm_trysemaphore(), but no has wider impact since it potentially affects all callers of getpid(). Hence, this change may also introduce some other issues that will need to be addressed.
1. Move exepath_*() related code to libc/misc
1. Rename exepath_ to envpath_
2. Rename BINFMT_EXEPATH to LIB_ENVPATH
libs/libc/modlib: Add pre module library symbol table support
many locations: Change occurences of open() followed by file_detach() to file_open(). Change most non-controversion calls to open() to nx_open().
fs/inode/fs_fileopen.c: Flesh out file_open() with some interim, placeholder logic.
fs/inode/fs_fileopen.c: Add a framework for a file_open() implementation (no real logic in place yet).
fs/vfs/fs_open.c: Add nx_open() which is the same as open() except that it does not create a cancellation point nor does it modify the errno variable.
drivers/serial/Kconfig: It is no longer necessary to restrict Ctrl-C handling to the FLAT build
sched/signal: Add a new configuration option to select signal default actions, separate handling of signal default actions from both task startup logic and from the serial TTY Ctrl-C logic. Add a signal set in the group structure to keep track of what signals have been set to the default action. In dispatching signals in PROTECTED or KERNEL mode, use this signal set to determine if the default signal handler is attached and dispatch the signal in kernel mode for the default actions.
drivers/serial: Add Ctrl-C/Ctrl-X support. This is an initial working implementation that still requires that several details be resolved.
sched/task/task_start.c: Add default signal action to SIGKILL.
binfmt/, libs/libc/unistd, and others: Rename CONFIG_EXECFUNCS_SYMTAB to CONFIG_EXECFUNCS_SYMTAB_ARRAY. Rename CONFIG_EXECFUNCS_NSYMBOLS to CONFIG_EXECFUNCS_NSYMBOLS_VAR. Unlike CONFIG_EXECFUNCS_NSYMBOLS, CONFIG_EXECFUNCS_NSYMBOLS_VAR holds the name of an 'int' variable that contains the number of symbols in the symbol table.
configs/sama5d4-ek: Partial update to knsh build instructions.
sched/: Convert legitimate uses of task_create() to nxtask_create(). Review handling of returned values from all uses of kthread_create() (as well as nxtask_create()).
graphics/: Review return values for all calls to kthread_start() because it no longer returns an errno.
drivers/: threads started by drivers should be kernel threads, not user tasks. Review return values for all calls to kthread_start() because it no longer returns an errno.
configs/: threads started by board bringup logic should be kernel threads, not user tasksi (part 2 of 2).
sched/task: Add nxtask_create(). Kthread_create() and nxtask_create() are internal OS functions and should not modify the errno variable. configs/: threads started by board bringup logic should be kernel threads, not user tasks.
The previous implementation of clearing global IRQ in sched_addreadytorun()
and sched_removereadytorun() was done too early. As a result, nxsem_post()
would have a chance to enter the critical section even nxsem_wait() is
still not in blocked state. This patch moves clearing global IRQ controls
from sched_addreadytorun() and sched_removereadytorun() to sched_resumescheduler()
to ensure that nxsem_post() can enter the critical section correctly.
For this change, sched_resumescheduler.c is always necessary for SMP configuration.
In addition, by this change, task_exit() had to be modified so that it calls
sched_resumescheduler() because it calls sched_removescheduler() inside the
function, otherwise it will cause a deadlock.
However, I encountered another DEBUGASSERT() in sched_cpu_select() during
HTTP streaming aging test on lc823450-xgevk. Actually sched_cpu_select()
accesses the g_assignedtasks which might be changed by another CPU. Similarly,
other tasklists might be modified simultaneously if both CPUs are executing
scheduling logic. To avoid this, I introduced tasklist protetion APIs.
With these changes, SMP kernel stability has been much improved.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
sched/sched: Correct some build issues introduced by last set of changes.
sched/sched: Add new internal OS function nxsched_setaffinity() that is identical to sched_isetaffinity() except that it does not modify the errno value. All usage of sched_setaffinity() within the OS is replaced with nxsched_setaffinity().
sched/sched: Internal functions sched_reprioritize() and sched_setpriority() no longer movidify the errno value. Also renamed to nxsched_reprioritize() and sched_setpriority().
sched/sched: Add new internal OS function nxsched_getscheduler() that is identical to sched_getscheduler() except that it does not modify the errno value. All usage of sched_getscheduler() within the OS is replaced with nxsched_getscheduler().
sched/sched: Add new internal OS function nxsched_setparam() that is identical to sched_setparam() except that it does not modify the errno value. All usage of sched_setparam() within the OS is replaced with nxsched_setparam().
sched/sched: Add new internal OS function nxsched_getparam() that is identical to sched_getparam() except that it does not modify the errno value (actually, the previous value erroneously neglected to set the errno value to begin with, but this fixes both issues). All usage of sched_getparam() within the OS is replaced with nxsched_getparam().
sched/mqueue: Rename all private static functions for use the nxmq_ vs. mq_ naming.
sched/mqueue: Rename all OS internal functions declared in sched/mqueue/mqueue.h to begin with nxmq_ vs. mq_. The mq_ prefix is reserved for standard application interfaces.
Replace all calls to sigprocmask() in the OS proper with calls to nxsig_procmask().
sched/signal: Add internal OS interface nxsig_procmask(). This internal interface is equivalent to the standard sigprocmask() used by applications except that it does not modify the errno value. Also fixes a problem in that the original sigprocmask() was not setting the errno.
This is analogous to similar renaming that was done previously for semaphores.
Squashed commit of the following:
sched/signal: Fix a few compile warnings introduced by naming changes.
sched/signal: Rename all private, internal signl functions to use the nxsig_ prefix.
sched/signal: Rename sig_removependingsignal, sig_unmaskpendingsignal, and sig_mqnotempty to nxsig_remove_pendingsignal, nxsig_unmask_pendingsignal, and nxsig_mqnotempty to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_findaction and sig_lowest to nxsig_find_action and nxsig_lowest to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_allocatepingsigaction and sig_deliver to nxsig_alloc_pendingsigaction and nxsig_deliver to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_cleanup, sig_release, sig_releasependingaction, and sig_releasependingsignal to nxsig_cleanup, nxsig_release, nxsig_release_pendingaction, and nxsig_release_pendingsignal to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_tcbdispatch and sig_dispatch to nxsig_tcbdispatch and nxsig_dispatch to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_releaseaction and sig_pendingset to nxsig_release_action and nxsig_pendingset to make it clear that these are OS internal interfaces.
sched/signal: Rename sig_initialize and sig_allocateactionblock to nxsig_initialize and nxsig_alloc_actionblock to make it clear that these are OS internal interfaces.
This commit backs out most of commit b4747286b1. That change was added because sem_wait() would sometimes cause cancellation points inappropriated. But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.
In the OS, all calls to sem_wait() changed to nxsem_wait(). nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.
In all OS functions (not libraries), change sem_wait() to nxsem_wait(). This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.
sched/semaphore: Add the function nxsem_wait(). This is a new internal OS interface. It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
The three fixes are to handle cases in the SMP configuration where one CPU does need to make modifications to TCB and data structures on a task that could be running running on another CPU. Those three cases are task_delete(), task_restart(), and execution of signal handles. In all three cases the solutions is basically the same: (1) Call sched_cpu_pause(tcb) to pause the CPU on which the task is running, (2) perform the necessary operations, then (3) call up_cpu_resume() to restart the paused CPU.
This change temporarily boosts the priority of the new pthread to at least the priority of the new pthread to at least the priority of the parent thread. When that bit of logic has executed on the thread of execution of the new pthread, it will then drop to the correct priority (if necessary) before calling into the new pthread's entry point.
