when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
This driver implements `read`, `write`, `open`, `close` and `ioctl`
interfaces to the SHT4X temperature and humidity sensor on an I2C bus.
The read implementation is that of a character driver for easy
debugging, while `ioctl` provides an interface to the sensor's raw data
collection and heating functionality.
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h: In function 'bool spin_trylock_wo_note(volatile spinlock_t*)':
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:401:22: error: 'atomic_ushort' was not declared in this scope; did you mean 'std::__1::atomic_ushort'?
401 | atomic_load((FAR atomic_ushort *)&lock->tickets.next);
| ^~~~~~~~~~~~~
| std::__1::atomic_ushort
/home/hujun5/downloads1/vela_sim/nuttx/include/libcxx/__atomic/aliases.h:33:7: note: 'std::__1::atomic_ushort' declared here
33 | using atomic_ushort = atomic<unsigned short>;
| ^~~~~~~~~~~~~
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:401:37: error: expected primary-expression before ')' token
401 | atomic_load((FAR atomic_ushort *)&lock->tickets.next);
| ^
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:410:14: error: expected unqualified-id before 'new'
410 | spinlock_t new =
| ^~~
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:417:44: error: 'atomic_uint' was not declared in this scope; did you mean 'std::__1::atomic_uint'?
417 | if (!atomic_compare_exchange_strong((FAR atomic_uint *)&lock->value,
| ^~~~~~~~~~~
| std::__1::atomic_uint
/home/hujun5/downloads1/vela_sim/nuttx/include/libcxx/__atomic/aliases.h:35:7: note: 'std::__1::atomic_uint' declared here
35 | using atomic_uint = atomic<unsigned int>;
| ^~~~~~~~~~~
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:417:57: error: expected primary-expression before ')' token
417 | if (!atomic_compare_exchange_strong((FAR atomic_uint *)&lock->value,
| ^
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:418:54: error: expected type-specifier before '.' token
418 | &old.value, new.value))
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Original documentation link for riscv is broken,
so update to the correct link for all architectures.
Put the link around `reg_off` to avoid the long line warning
from nxstyle.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
- use 'lan9250_ioctl' to set and get the value of lan9250 phy register
- use `lan9250_uninitialize` to un-initialize the ethernet driver
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
This definition was added in order to solve some compilation problems
encountered when porting tripartite libraries
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This definition was added in order to solve some compilation problems
encountered when porting third-party libraries
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
To solve some compilation issues encountered during the porting of
third-party libraries, this function has been added.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This adds field type to canioc_bittiming_s structure that allows
to set/obtain bit timing for both CAN CC and CAN FD.
CANIOC_GET_BITTIMING is now bidirectional: user specifies type field
and gets other fields from the controller.
The commit also updates current CAN FD capable controllers using the
ioctl. The type is not checked for classical CAN only controllers
and nominal bit timing is returned regardless of type value.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit moves can_bytes2dlc and can_dlc2bytes from kernel internal
functions to API. These functions are necessary to convert bytes to
dlc for CAN FD frames and has to be accessible from the application
since can_hdr_s does not store message length in bytes but directly in
dlc.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Add a common method to format backtrace to buffer, so it can be used by both mm, fs and other possoble modules.
Signed-off-by: fangpeina <fangpeina@xiaomi.com>
Allow CPU_XXX macros to be used without CONFIG_SMP=y
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
Co-authored-by: Bowen Wang <wangbowen6@xiaomi.com>
Thread args have already been saved to stack after the TLS section by
nxtask_setup_stackargs. This is to retrieve it for use.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
make possible enable pool, but disabled in system heap.
also compatible for further extra heap use/not use pool.
Now use MM_HEAP_MEMPOOL_THRESHOLD -1 to indicate pool disabled.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
we can use g_cpu_lockset to determine whether we are currently in the scheduling lock,
and all accesses and modifications to g_cpu_lockset, g_cpu_irqlock, g_cpu_irqset
are in the critical section, so we can directly operate on it.
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
If the CAN stack receiving packets fast, but the application layer reading packets slow. Then `conn->readahead` will continue to grow, leading to memory leaks. Finally CAN stack potentially starve out all IOB buffers. To prevent memory leaks, users can restrict can socket buffer length.
Signed-off-by: gaohedong <gaohedong@xiaomi.com>
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h: In function 'oneshot_max_delay':
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h:272:3: error: implicit declaration of function 'timespec_from_tick' [-Wimplicit-function-declaration]
272 | timespec_from_tick(ts, tick);
| ^~~~~~~~~~~~~~~~~~
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h: In function 'oneshot_start':
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h:285:10: error: implicit declaration of function 'timespec_to_tick'; did you mean 'timespec_get'? [-Wimplicit-function-declaration]
285 | tick = timespec_to_tick(ts);
| ^~~~~~~~~~~~~~~~
| timespec_get
This adds IS_POWER_OF_2 macro to help catching config errors at
build time.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
sched implementation not depends on macro abstraction, so revert below commit:
This reverts commit 4e62d0005a
This reverts commit 0f0c370520
This reverts commit ad0efd04ee
Signed-off-by: chao an <anchao@lixiang.com>
pointer comparison is unsigned, when returning -errno will be converted
to a large positive number, can not enter the error handling branch,
therefore, the error code is returned directly and the sem is returned
through the parameters.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
After change, when CONFIG_PM_NDOMAINS > 1,
the pm_register will not able to get notificaion
from not PM_IDLE_DOMAIN.
Should use pm_domain_register as a replacement.
Isolate domains from global callbacks can decrease
not necessary execution, and reduce the
lock instruction requirements.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
umm_memdump() should be always declared otherwise we get error when DEBUG_MM=n:
sched/task/task_exithook.c:468:7: error: implicit declaration of function ‘umm_memdump’; did you mean ‘mm_memdump’? [-Wimplicit-function-declaration]
MCP794XX supports digital trimming that periodically adds or subtracts
clock cycles, resulting in small adjustments in the internal timing.
This way inaccuracies of clock source can be compensated.
This commit adds option to set the trimming register for MCP794XX.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
The definition of nxsched_process_cpuload_ticks uses clock_t, which is
portable across uint32_t and uint64_t timers, and works if CONFIG_SYSTEM_TIME64 is
defined.
only when first time change state can hold WFI for enough time thresh,
allow second time goto target state,
suitable for the case when wakeup from sleep too slow, etc.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Some drivers may set too big quota by accident and consume all of our
buffers, so we add a check when registering devices.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
we removed "select SCHED_RESUMESCHEDULER",
As SCHED_RESUMESCHEDULER is not a necessary feature in SMP,
turning it on by default may affect performance.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Implement the bzero function as an alternative to macro expansion.
and support gcc FORTIFY_SOURCE features for nuttx libc
This function will use gcc's function
__builtin_dynamic_object_size and __builtin_object_size
Its function is to obtain the size of the object through compilation,
so as to judge whether there are out-of-bounds operations in commonly used functions.
It should be noted that the option -O2 and above is required to enable this function
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This revises vm_map_region() by accepting unaligned paddr, which is
aligned-down before mapping and in-page offset is then added to vaddr
before returning. It also moves vm_map_region() and vm_unmap_region()
to vm_region.c.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Also extend the "struct phy_desc_s" to support for 1GB PHY's, the speed
detection always needs more than one bit.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
In the gcc-riscv compiler, __builtin_ffs will call ffs, and calling __builtin_ffs in ffs will cause recursion
Change ffs to an inline function, and compile ffs implemented by nuttx by default.
Only call the implementation of nuttx when the compiler cannot provide an ffs implementation.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This patch adds definitions to support user space device mappings
that allows devices like frame buffer to be accessible from user
space in kernel mode.
The are mainly two changes:
- in `mm/`:
added vm_map_region(), vm_unmap_region() for drivers to do
device mapping easily.
- in `arch/`:
extended ARCH_SHM_NPAGES as user-space mapping region size.
decoupled ARCH_SHM_MAXREGIONS from region size calculations and
limit its usage only for SysV shm purposes.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Support the network interface card driver to receive zero copies of packets and send and receive giant frame packets, allowing drivers to initialize the DMA buffer to the iob structure, and we can apply for IOB with large memory
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Now we only supports conntrack info from NAT entries, to let our apps in user space know the mapping status in NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This commit adds support for reallocarray function. The functionality
is the same as for standard realloc, but the function also checks for
multiplication overflow and fails safely in case it occurs.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
In order to ensure the detached thread obtain the correct return
value from pthread_join()/pthread_cancel(), the detached thread
will create joininfo to save the detached status after thread
destroyed. If there are too many of detached threads in the
process group, the joininfo will consume too much memory.
This is not friendly to embedded MCU devices.
This commit keep the semantics as #11898 was introduced,
will no longer save joininfo for detached threads to avoid wasting memory.
Signed-off-by: chao an <anchao@lixiang.com>
iC-JX expander has NINT (not interrupt) pin that goes to logical zero
if interrupt occurs. This commit adds support for iC-JX options settings
that allows to enable the interrupt for defined input pins.
The interrupt is handled in HP worker thread to avoid waiting for SPI
transfers in interrupt context. Board has to configure interrupt event
for GPIO pin connected to NINT.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This patch uses "struct mm_map_entry_s" instead of the non-existing
"struct mm_map_entry" with minor revision on comments.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
fix build break if enable CONFIG_DISABLE_MQUEUE:
In file included from sched/mqueue/mqueue.h:38,
from group/group_leave.c:45:
include/nuttx/mqueue.h:124:26: error: ‘CONFIG_FS_MQUEUE_NPOLLWAITERS’ undeclared here (not in a function); did you mean ‘CONFIG_SERIAL_NPOLLWAITERS’?
124 | FAR struct pollfd *fds[CONFIG_FS_MQUEUE_NPOLLWAITERS];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| CONFIG_SERIAL_NPOLLWAITERS
Signed-off-by: chao an <anchao@lixiang.com>
which is useful in the m2m usage scenario, by replacing the first
argument of callback from "struct v4l2_ops_s *" to "struct file *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The video_controls.h is a public header file, and it is used by
videoio.h. So it should be moved to the include/sys directory.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
In SMP mode, up_cpu_index()/this_cpu() are the same, both return the index of the physical core.
In AMP mode, up_cpu_index() will return the index of the physical core, and this_cpu() will always return 0
| #ifdef CONFIG_SMP
| # define this_cpu() up_cpu_index()
| #elif defined(CONFIG_AMP)
| # define this_cpu() (0)
| #else
| # define this_cpu() (0)
| #endif
Signed-off-by: chao an <anchao@lixiang.com>
This driver is based on ESP32 TWAI CAN drivers currently available
in Nuttx, and captures the differences currently present across the
TWAI drivers for easy future adaption to remaining ESP32 platforms
with no loss of support/function. Also provides a generic SJA1000 CAN
driver solution that is CPU-architecture independent.
Changes:
- Low-level driver re-written to allow usage independent of CPU
architecture, and support both SJA1000 and TWAI CAN controllers.
- Platform-specific settings abstracted away to be provided by board
layer.
- Support for multiple instances of SJA1000 driver.
The overhead of spinlok is less than mutext (mutex need to call
enter_critical section.)
After this patch, `down_write_trylock` and `down_read_trylock` can be
use in interrupt context.
The instruction is protected with mutex only one instruction so using
spinlock is better.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Purpose: make the the os crash when busyloop with interrupt disable
Follow the arm gicv2 spec, if we want to use the IRQ and FIQ
simultaneously when not using the processor Security Externsions.
We should:
1. IRQ to Group 1 and FIQ to Group 0;
2. Set CICC_CTLR.FIQEn to 1;
Then in NuttX:
1. implement the arm_decodefiq and directly crash in it;
2. provide interface to change the IRQ to FIQ, e.g. change the
watchdog IRQ to FIQ, so the watchdog can trigger even with the
interrupt disabled (up_irq_save() called);
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
1. add support to join main task
| static pthread_t self;
|
| static void *join_task(void *arg)
| {
| int ret;
| ret = pthread_join(self, NULL); <--- /* Fix Task could not be joined */
| return NULL;
| }
|
| int main(int argc, char *argv[])
| {
| pthread_t thread;
|
| self = pthread_self();
|
| pthread_create(&thread, NULL, join_task, NULL);
| sleep(1);
|
| pthread_exit(NULL);
| return 0;
| }
2. Detach active thread will not alloc for additional join, just update the task flag.
3. Remove the return value waiting lock logic (data_sem),
the return value will be stored in the waiting tcb.
4. Revise the return value of pthread_join(), consistent with linux
e.g:
Joining a detached and canceled thread should return EINVAL, not ESRCH
https://pubs.opengroup.org/onlinepubs/009695399/functions/pthread_join.html
[EINVAL]
The value specified by thread does not refer to a joinable thread.
NOTE:
This PR will not increase stack usage, but struct tcb_s will increase 32 bytes.
Signed-off-by: chao an <anchao@lixiang.com>
Adjust the v4l2 framework to support both capture and v4l2m2m,
and can easily add other v4l2 features.
Signed-off-by: shizhenghui <shizhenghui@xiaomi.com>
Modify control id definition to avoid duplication even if
the control ids belong to the same control class.
Also, not refer to control class in driver.
move task group into task_tcb_s to avoid access allocator to improve performance
for Task Termination, the time consumption will be reduced ~2us (Tricore TC397 300MHZ):
15.97(us) -> 13.55(us)
Signed-off-by: chao an <anchao@lixiang.com>
Change the type of task group member to single list chain to
avoid accessing the memory allocator to improve the performance
Signed-off-by: chao an <anchao@lixiang.com>
Pre-allocated files to avoid allocator access during thread creation
phase, For functional safety requirements, increase
CONFIG_NFILE_DESCRIPTORS_PER_BLOCK could also avoid allocator access
caused by the file descriptor exceeding the limit.
For Task Termination, the time consumption will be reduced ~3us (Tricore TC397 300MHZ):
10.65(us) -> 7.35(us)
NOTE:
This commit will not waste of extra heap, just pre-allocates the list of files for task_group.
Signed-off-by: chao an <anchao@lixiang.com>
This change is missing from the below commit:
| commit 7cb1f3b3c0
| Author: chao an <anchao@lixiang.com>
| Date: Tue Mar 5 10:23:30 2024 +0800
|
| sched/group: replace group_findbypid to task_getgroup
|
| Task group could find from process id, replace group_findbypid to
| task_getgroup to simplify the search logic
|
| Signed-off-by: chao an <anchao@lixiang.com>
Signed-off-by: chao an <anchao@lixiang.com>
The maximum startup parameters have been checked accordingly in nxtask_setup_stackargs(),
let us save argument counter to avoid limit check.
Signed-off-by: chao an <anchao@lixiang.com>
Current `CONFIG_PAGING` refers to an experimental implementation
to enable embedded MCUs with some limited RAM space to execute
large programs from some non-random access media.
On-demand paging should be implemented for the kernel mode with
address environment implementation enabled.
Add support for static tcb, applications in some special case can
initialize system resources in advance through static tcb.
| static struct task_tcb_s g_tcb;
|
| memset(&g_tcb, 0, sizeof(struct task_tcb_s));
| g_tcb.cmn.flags = TCB_FLAG_TTYPE_KERNEL;
| nxtask_init(&g_tcb, "PTCB", 101, NULL, 1024, ptcb_task, NULL, NULL, NULL);
|
| ...
| nxtask_activate(&g_tcb.cmn);
Signed-off-by: chao an <anchao@lixiang.com>
cpu0 thread0: cpu1:
sched_yield()
nxsched_set_priority()
nxsched_running_setpriority()
nxsched_reprioritize_rtr()
nxsched_add_readytorun()
up_cpu_pause()
IRQ enter
arm64_pause_handler()
enter_critical_section() begin
up_cpu_paused() pick thread0
arm64_restorestate() set thread0 tcb->xcp.regs to CURRENT_REGS
up_switch_context()
thread0 -> thread1
arm64_syscall()
case SYS_switch_context
change thread0 tcb->xcp.regs
restore_critical_section()
enter_critical_section() done
leave_critical_section()
IRQ leave with restore CURRENT_REGS
ERROR !!!
Reason:
As descript above, cpu0 swith task: thread0 -> thread1, and the
syscall() execute slowly, this time cpu1 pick thread0 to run at
up_cpu_paused(). Then cpu0 syscall execute, cpu1 IRQ leave error.
Resolve:
Move arm64_restorestate() after enter_critical_section() done
This is a continued fix with:
https://github.com/apache/nuttx/pull/6833
Signed-off-by: ligd <liguiding1@xiaomi.com>
Use private naming to avoid conflicts with user applications
In file included from libuv/src/unix/internal.h:25,
from libuv/src/unix/udp.c:23:
libuv/src/uv-common.h:57: warning: "container_of" redefined
57 | #define container_of(ptr, type, member) \
|
In file included from nuttx/include/nuttx/list.h:47,
from nuttx/include/nuttx/tls.h:40,
from nuttx/include/nuttx/sched.h:48,
from nuttx/include/nuttx/arch.h:87,
from nuttx/include/nuttx/userspace.h:35,
from nuttx/include/nuttx/mm/mm.h:30,
from nuttx/include/nuttx/kmalloc.h:34,
from nuttx/include/nuttx/lib/lib.h:31,
from nuttx/include/stdio.h:35,
from apps/system/libuv/libuv/include/uv.h:59,
from libuv/src/unix/udp.c:22:
nuttx/include/nuttx/nuttx.h:48: note: this is the location of the previous definition
48 | #define container_of(ptr, type, member) \
|
Signed-off-by: chao an <anchao@lixiang.com>
Requirement of nuttx as a minimum scheduler os.
Test build on Cortex-R52, fvp-armv8r-aarch32/nsh
Disable CONFIG_DEBUG_ASSERTIONS and without this change:
$ size nuttx
text data bss dec hex filename
19484 104 1092 20680 50c8 nuttx
Disable CONFIG_DEBUG_ASSERTIONS and with this change:
$ size nuttx
text data bss dec hex filename
17604 80 848 18532 4864 nuttx
Signed-off-by: chao an <anchao@lixiang.com>
include/nuttx/tls.h:52:4: warning: #warning CONFIG_TLS_NELEM is not defined [-Wcpp]
52 | # warning CONFIG_TLS_NELEM is not defined
| ^~~~~~~
In file included from include/nuttx/sched.h:48,
from include/nuttx/arch.h:87,
from include/nuttx/userspace.h:35,
from include/nuttx/mm/mm.h:30,
from include/nuttx/kmalloc.h:34,
from sim_bringup.c:33:
include/nuttx/tls.h:52:4: warning: #warning CONFIG_TLS_NELEM is not defined [-Wcpp]
52 | # warning CONFIG_TLS_NELEM is not defined
| ^~~~~~~
Signed-off-by: chao an <anchao@lixiang.com>
In the previous patch, we moved rptun_panic and rptun_dump_all in rptun to rpmsg.
In order to ensure CI pass, this two API in rptun is not removed. So we remove rptun_panic and rptun_dump_all in this patch.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
The implementation of assert in linux is as follows:
define assert(expr) (__ASSERT_VOID_CAST (0))
After defining NDEBUG in sqlite, some variables will be undefined,
and referencing variables in assert will cause compilation errors.
sqlite3.c:28729:23: error: ‘mutexIsInit’ undeclared (first use in this function)
28729 | assert( GLOBAL(int, mutexIsInit) );
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
According to the standard definition, assert should return a void expression
https://pubs.opengroup.org/onlinepubs/007904875/basedefs/assert.h.html
This patch involves two changes:
If you define the NDEBUG macro, assert does not use any parameters and directly returns a void expression.
assert should return a void expression and cannot use do-while statements.
If the following code , a compilation error will occur.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
ALT1250 driver sends an event named LTE_CMDID_RESTARTAPI
to ALT1250 daemon when state is PM_NOARMAL in the function
of prepare registered by pm_register.
It should be possible to use ping without rptun being enabled, so striped rptun_ping out of rptun and rename to rpmsg_ping.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
Squashed commits:
1. Porting prior PCI work in place of jailhouse code
At this point the PCI enumeration works for x86_64 including over
pci-pci bridges.
Running QEMU with this configuration we see the bridge and the
device on the bridge. It also detected the qemu test device
qemu-system-x86_64 \
-cpu host,+pcid,+x2apic,+tsc-deadline,+xsave,+rdrand \
--enable-kvm -smp 1 -m 2G -cdrom boot.iso --nographic -no-reboot \
-device pci-testdev \
-device pci-bridge,id=bridge0,chassis_nr=2 \
-device e1000,bus=bridge0,addr=0x3
qemu_pci_init: Initializing PCI Bus
pci_probe_device: [00:00.0] Found 8086:1237, class/revision 06000002
pci_probe_device: [00:01.1] Found 8086:7010, class/revision 01018000
pci_probe_device: [00:01.2] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.3] Found 8086:7113, class/revision 06800003
pci_probe_device: [00:01.4] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.5] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.6] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:01.7] Found ffff:ffff, class/revision ffffffff
pci_probe_device: [00:02.0] Found 1234:1111, class/revision 03000002
pci_probe_device: [00:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:04.0] Found 1b36:0005, class/revision 00ff0000
pci_probe_device: [00:04.0] Probing
pci_check_pci_bridge: [00:05.0] Found Bridge
pci_probe_device: [01:03.0] Found 8086:100e, class/revision 02000003
pci_probe_device: [00:05.0] Found 1b36:0001, class/revision 06040000
2. Remove unused CONFIG_PCI_MAX_BDF option
3. Add a workaround for Jailhouse pci scanning
4. Extend BAR parsing and handle PIO and MMIO for pci-testdev
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
5. PCI: Add initial support for QEMU 'edu' test device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
6. Bring up PCI later in boot process
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
7. Add ISR and DMA support to QEMU edu test pci device
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
8. Fix bad function prototype definition in qemu_edu
9. intel64: Add a pci test configuration and instructions
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
10. PCI: Fix issue in identification of 64bit bar
Signed-off-by: Brennan Ashton <bashton@brennanashton.com>
Squashed commits:
1. x86_64: qemu: implement pci-e functions and enumerate pci-e devices on boot
2. virt: add qemu pci-testdev driver
3. pcie: types array should be null terminated
4. pcie: enable don't take flags, hardcoded enabling flags
5. pcie: checking bar > 4 for 64bit bars are sufficient
6. pcie: qemu: remove not used header
7. pcie: qemu: return -EINVAL if buffer argument is NULL
8. pcie: make pcie enumerate routine as common instead of architecture dependent
9. pcie: cosmetic changes to fit check tools
10. pcie: create MSI/MSIX related marcos and simplify the msi/msix routines
- spi/slave.h: revise comments in pulic types section
- doc/sim.rst: minor formatting, add ways to escape cu
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This commit adds basic support for iC-JX expander in SPI mode. The
expander is functional and supports both input and output pins. Further
expander functionalities (filtering, adc, interrupt support) are not
yet implemented.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This change adds support for the USB Transport Layer as described
in the bluetooth spec. Isochronous endpoints are not yet supported.
Because of limitations in the NuttX bluetooth stack, only one USB
device can be used. This driver will only allow one USB dongle to
use bluetooth.
A Laird USB BT4.2 dongle (from Mouser) was used for testing:
M/N BT851 1.0 1829, FCC ID:SQGBT850
lsusb: 04b4:f901 Cypress Semiconductor Corp. CYW20704A2
The following commands were used to test from the nsh prompt:
bt bnep0 scan start
bt bnep0 scan stop
bt bnep0 scan get
bt bnep0 info
The Linux gatttool was used to connect over wireless.
With the BDAddr found by "bt bnep0 info", start gatttool using:
gatttool -b BDAddr -I
Connect to the device using:
connect
Read the device name using the GAP device name UUID:
char-read-uuid 2a00
Part of the response is:
value: 41 70 61 63 68 65 20 4e 75 74 74 58
which is the string "Apache NuttX"
nuttx/driver/rpmsg: new folder, extract common rpmsg api in rptun.c to rpmsg.c.
rpmsg provide rpmsg_ops to each backend for specific implementation.
Signed-off-by: wangyongrong <wangyongrong@xiaomi.com>
Usually the startup script is placed under /etc. The contents of the etc directory
are compiled and linked with Nuttx binary in the form of romfs. After startup,
it will be mounted by Nsh.
etc is generated by the different boards, that use genromfs and xxd tools to generate
and compile it into the Nuttx, for example: boards/arm/at32/at32f437-mini/tool/mkromfs.sh
The more common method is etc image generated from the content in the corresponding
board/arch/board/board/src/etc directory, and added by Makefile for example:
boards/sim/sim/sim/src/etc.
But in kernel/protected mode, Nuttx kernel and apps are run in different privileged/
non-privileged mode or the isolated binarys, so as that nsh should use syscall to
access Nuttx kernel by exported API. In this scenario, nsh can not mount the etc image
content, because that is generated in board and as a part of Nuttx kernel.
changes:
- move etc romfs mount from nsh to Nuttx, but keep the script to parse and execute.
- move and rename the related CONFIG, move customized nsh_romfsimg.h to etc_romfs.c
in boards, and no need declaration for romfs_img/romfs_img_len.
This commit changes and updates all configurations in Nuttx arch/board as much as possible,
but if any missing, please refer to the following simple guide:
- rename CONFIG_NSH_ROMFSETC to CONFIG_ETC_ROMFS, and delete CONFIG_NSH_ARCHROMFS in defconfig
- rename the etc romfs mount configs, for example CONFIG_NSH_FATDEVNO to CONFIG_ETC_FATDEVNO
- move customized nsh_romfsimg.h to etc_romfs.c in board/arch/board/board/src and no need
declaration for romfs_img/romfs_img_len.
- delete default nsh_romfsimg.h, if ROMFSETC is enabled, should generate and compile etc_romfs.c
in board/arch/board/board/src.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
