Use correct path to include mutex.h
Fixes:
chip/stm32_bbsram.c:42:10: fatal error: mutex.h: No such file or directory
42 | #include <mutex.h>
| ^~~~~~~~~
In order to turn longjmp context-switch safe, it's necessary
to disable interrupts before modifying windowbase and windowstart.
Otherwise, after a context switch, windowstart and windowbase
would be different, leading to a wrongly set windowstart bit due to
longjmp writing it based on the windowbase before the context switch.
This corrupts the registers at the next window overflow reaching
that wrongly set bit.
*Background:*
This PR is related to an issue first observed on ESP-IDF
https://github.com/espressif/esp-idf/issues/5229 and it was, then,
checked on NuttX using a test application.
*The test application:*
To check if the problem affects ESP32, ESP32-S2 and ESP32-S3 on
NuttX, it was created an application based on:
https://en.cppreference.com/w/c/program/longjmp
The application creates 16 tasks (`#define NUMBER_OF_TASKS 16`)
that implements the following daemon:
```
static int setjmp_longjmp_daemon(int argc, char *argv[])
{
for (int i = 0; i < NUMBER_OF_TASKS * 2; i++)
{
jmp_buf env;
volatile int count = 0;
if (setjmp(env) != UINT16_MAX)
{
foo(&env, ++count);
}
}
sem_post(&g_sem);
return EXIT_SUCCESS;
}
```
The main function also initializes a semaphore to avoid application
exiting before tasks return successfully:
```
sem_init(&g_sem, 0, -NUMBER_OF_TASKS);
```
Finally, the round-robin interval was lowered to 1ms to raise the
chances of the longjmp being interrupted by a context switch
(`CONFIG_RR_INTERVAL=1).
This setup was able to reproduce the problem prior to this patch
being applied.
1. epoll_ctl(EPOLL_CTL_ADD) support extend the epoll
events dynamicly;
2. enhance the epoll performance by moving some poll setup
and teardown process to the EPOLL_CTL_ADD/DEL/MOD;
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
This will allow changing the underlying backend, i.e. granule allocator,
to something more efficient, if this is needed later.
Also, it gives easier access to the common SHM book keeping.
User can ask for specific granules to be allocated.
This is useful for one thing only: when mmap() is called for a specific
vaddr. The parameter itself is non-sensical, this is just to satisfy
the POSIX standard.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
add the task from the specified task list to reduce time consuming.
It takes about 10 cycles to obtain the task list according to the task
status. In most cases, we know the task status, so we can directly
delete the task from the specified task list to reduce time consuming.
when usrsock client try to connect usrsock server local_loop
socket with an invalid port, server cannot find a listener conn
to handle this connet request, then it will response a TCP_RESET
packet via nuttx existing processing, when before conn recv this
RESET packet, it will trigger usrsock_rpmsg_server poll return
and send REMOTE_CLOSE event to usrsock client.
so usrsock connect_event fucntion need handle this event.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
The write has to be in number of bytes per pixel as single SPI exchange
is used to identify single pixel write by the ST7789 driver. By issuing
only byte writes the displayed color is corrupted as it is stripped.
This fix consist of setting SPI to correct number of exchanged bytes and
then passing correctly number of words to the SPI exchange.
This also covers usage of st7789_wrram in st7789_putrun as that one was
passing just number of pixels as size but the correct is now number of
bytes.
Add support for the LTR308 ambient light sensor through I2C. Currently,
the interrupt-driven mode of operation is not supported.
Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
- Add ioctl method to enable allocating the apb buffer.
- Add RX methods to set data width, sample rate, channels and
for receiving data from the I2S peripheral.
- Update the i2schar defconfig to enable the I2S receiver.
- Add nxlooper defconfig to enable testing the RX interface.
- Add specific bindings on ESP32-S2 bringup to enable nxlooper
to work without the need of any specific codec.
After commit b7d2b38, the system suffers from -Warray-bounds warning with -Wall:
chip/mpfs_opensbi.c: In function 'mpfs_hart_to_scratch':
chip/mpfs_opensbi.c:251:26: warning: array subscript hartid is outside array bounds of 'sbi_scratch_holder_t[0]' {aka 'struct sbi_scratch_holder_s[]'} [-Warray-bounds]
251 | return (unsigned long)(&g_scratches[hartid].scratch);
Fix it by reverting back to what is was earlier. g_scratches shouldn't be in the bss
region that would be zeroed out.
Signed-off-by: Eero Nurkkala <eero.nurkkala@offcode.fi>
