Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
SO_SNDBUF takes effect only after the connection in STREAM mode
is successful
support full life cycle modification of SO_RCVBUF
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
unsigned_compare: This greater-than-or-equal-to-zero comparison without a signed value is always true. conn->lc_crefs >= 0
Signed-off-by: Shoukui Zhang <zhangshoukui@xiaomi.com>
move the accept logic into connect flow.
In order to successfully establish a blocking connection between
the client and server on the same thread.
nonblock is not affected, and the block connect is now the same
as the nonblock flow, other apis are not affected.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
==1729315==ERROR: AddressSanitizer: heap-use-after-free on address 0xf0501d60 at pc 0x032ffe43 bp 0xef4ed158 sp 0xef4ed148
READ of size 2 at 0xf0501d60 thread T0
#0 0x32ffe42 in nxsem_wait semaphore/sem_wait.c:94
#1 0x3548cf5 in _net_timedwait utils/net_lock.c:97
#2 0x3548f48 in net_sem_timedwait utils/net_lock.c:236
#3 0x3548f8c in net_sem_wait utils/net_lock.c:318
#4 0x350124d in local_accept local/local_accept.c:246
#5 0x3492719 in psock_accept socket/accept.c:149
#6 0x3492bcc in accept4 socket/accept.c:280
#7 0x662dc04 in accept net/lib_accept.c:50
#8 0x55c81ab in kvdb_loop kvdb/server.c:415
#9 0x55c860a in kvdbd_main kvdb/server.c:458
#10 0x33d968b in nxtask_startup sched/task_startup.c:70
#11 0x32ec039 in nxtask_start task/task_start.c:134
#12 0x34109be in pre_start sim/sim_initialstate.c:52
0xf0501d60 is located 288 bytes inside of 420-byte region [0xf0501c40,0xf0501de4)
freed by thread T0 here:
#0 0xf7aa6a3f in __interceptor_free ../../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:127
#1 0x73aa06e in host_free sim/posix/sim_hostmemory.c:192
#2 0x34131d6 in mm_free sim/sim_heap.c:230
#3 0x3409388 in free umm_heap/umm_free.c:49
#4 0x35631f3 in local_free local/local_conn.c:225
#5 0x3563f75 in local_release local/local_release.c:129
#6 0x34f5a32 in local_close local/local_sockif.c:785
#7 0x3496ee8 in psock_close socket/net_close.c:102
#8 0x36500bc in sock_file_close socket/socket.c:115
#9 0x3635f6c in file_close vfs/fs_close.c:74
#10 0x3632439 in nx_close_from_tcb inode/fs_files.c:670
#11 0x36324f3 in nx_close inode/fs_files.c:697
#12 0x3632557 in close inode/fs_files.c:735
#13 0x55be289 in property_set_ kvdb/client.c:210
#14 0x55c0309 in property_set_int32_ kvdb/common.c:226
#15 0x55c03f5 in property_set_int32_oneway kvdb/common.c:236
Signed-off-by: ligd <liguiding1@xiaomi.com>
net_lock/unlock is a big lock and repleace it to internal pool lock
to avoid the priority inversion problem.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
server:
at accept last nxsem_post(&client->lc_waitsem);
client:
connect wait(&client->lc_waitsem) then local_open_client_rx();
But if the server priority is higher then client,
and after server accept return, immediately call send().
At this time the client has no way do local_open_client_rx().
Then server send() return error.
Fix:
add lc_done sem to client
Signed-off-by: ligd <liguiding1@xiaomi.com>
As a policy, all internal OS implementations must use "detached" files which are valid in any context and do not depend on the validity of a file descriptor at any point in time. This commit converts the usage of file descriptors to detached files throughout the local socket implementation.
Squashed commit of the following:
net/local: Finish change to eliminate use of file descriptors.
net/local: A little more of the conversion.
net/local: Beginning of chnages to eliminate use of file descriptors in the local socket implementeation. poll() will be a problem.
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
