sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
43,322 Commits 1 Branch 0 Tags 291 MiB
3b3cebdd3e
Commit Graph

483 Commits

Author SHA1 Message Date
Gregory Nutt
20814acad2 sched/signal: In signal notification facility, use sigqueue() to notify vs. kill(). With sigqueue, we can pass more info (but still not enough). 2018-09-09 11:57:25 -06:00
Gregory Nutt
32e3e51678 net/netdev: Add signal notification for the case where the network goes down. 2018-09-09 10:39:25 -06:00
Gregory Nutt
28f73bd928 net/tcp and udp: Add logic to signal events when TCP or UDP read-ahead data is buffered. 
Squashed commit of the following:

    net/tcp:  Add signal notification for the case when UDP read-ahead data is buffered.  This is basically of clone of the TCP notification logic with naming adapted for UDP.

    net/tcp:  Add signal notification for the case when TCP read-ahead data is buffered.
 2018-09-09 09:21:39 -06:00
zhangyuan7
da1a323f34 net/tcp/tcp_monitor.c: Fix net unlock issue when tcp close. This bug could leave the net locked. 2018-08-26 14:32:06 -06:00
Gregory Nutt
3bf96c8e7e net/arp: Improve arp_find() commit 9774d35010 to reduce the amount and frequency of data copies. 2018-08-25 07:12:21 -06:00
Gregory Nutt
9774d35010 net/arp: Make the function arp_find() thread-safe. It now returns a copy of the ARP table entry, rather than a potentially unstable reference to the ARP table entry. 2018-08-24 17:36:08 -06:00
Gregory Nutt
af9fb080e0 fix a spelling error 2018-08-21 10:33:16 -06:00
Masayuki Ishikawa
ac5b2ea049 Merged in masayuki2009/nuttx.nuttx/fix_tcp_statistics (pull request #703) 
net/tcp: Remove g_netstats.tcp.syndrop++ from tcp_data_event()

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-08-03 01:25:53 +00:00
Gregory Nutt
427b3b8fcb Squashed commit of the following: 
net/utils:  return from net_breaklock() was being clobbered.
    net/:  Replace all calls to iob_alloc() with calls to net_ioballoc() which will release the network lock, if necessary.
    net/utils, tcp, include/net:  Separate out the special IOB allocation logic and place it in its own function.  Prototype is available in a public header file where it can also be used by network drivers.
    net/utils: net_timedwait() now uses new net_breaklock() and net_restorelock().
 2018-07-07 08:26:13 -06:00
Gregory Nutt
75cc19ebb4 net/tcp: Fix a deadlock condition that can occur when (1) all network logic runs on a single work queue, (1) TCP write buffering is enabled, and (2) we run out of IOBs. In this case, the TCP write buffering logic was blocking on iob_alloc() with the network locked. Since the network was locked, the device driver polls that would provide take the write buffer data and release the IOBs could not execute. This fixes the problem by unlocking the network lock while waiting for the IOBs. 2018-07-06 19:49:05 -06:00
Gregory Nutt
23a8af2069 Trivial update to some comments. 2018-07-06 17:37:26 -06:00
Gregory Nutt
5764d5a529 net/tcp: Back out part of commit d944388888. I see a few places that say that the maximum receive window size is 32,767 (INT16_MAX), but most say that it is 65,535 (UINT16_MAX). 2018-07-05 17:41:01 -06:00
Gregory Nutt
d944388888 configs/viewtool-stm32f107: Add a TCP performance test using apps/examples/tcpblaster. 2018-07-05 16:08:03 -06:00
Gregory Nutt
73c4b1610b net/tcp: Set the default TCP MSS to the value required by RFC 879 and never change it under any circumstance unless the remote host requests a larger MSS via an option the TCP header. 2018-07-05 10:54:45 -06:00
Gregory Nutt
22cd0d47fa This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE. 
This makes the user interface a little hostile.  People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header).  A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length.  Instead, we define the packet buffer size then derive the MTU.

The MTU is not common currency in networking.  On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP).  Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes.  So we should be all good and without the recurring 14 byte error in MTU's and MSS's.

Squashed commit of the following:

    Trivial update to fix some spacing issues.
    net/: Rename several macros containing _MTU to _PKTSIZE.
    net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU.  These are not the MTU which does not include the size of the link layer header.  These are the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE.  This is not the MTU which does not include the size of the link layer header.  This is the full size of the packet buffer memory (minus any GUARD bytes).
    net/: Rename the file d_mtu in the network driver structure to d_pktsize.  That value saved there is not the MTU.  The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header.  The MTU does not include the link layer header.
 2018-07-04 14:10:40 -06:00
Gregory Nutt
e59b26370d Squashed commit of the following: 
Fix a few typo/compilation problems.
    net/:  Remove all CONFIG_NET_xxx_TCP_RECVWNDO configuration variables.  They were used only to initialize the d_recwndo of the network device structure which no longer exists.
    net/:  Remove the device TCP receive window field (d_recvwndo) from the device structure.  That value is no longer retained, but is calculated dynamically.
    Remove some dangling references to CONFIG_NET_TCP_RWND_CONTROL.
    net/tcp:  Take read-ahead throttling into account when calculating the TCP receive window size.
    net/tcp: tcp_get_recvwindow() now returns the receive window size directly (vs. indirectly via the device structure).
    net/tcp:  Remove CONFIG_NET_TCP_RWND_CONTROL.  TCP window algorithm is now trigged only by CONFIG_NET_TCP_READAHEAD.
 2018-07-01 07:59:33 -06:00
Gregory Nutt
b32d8b1714 net/tcp and sixlowpan: Separate the the TCP receive window calculations to a separate header file. It must also be used by the special 6LoWPAN TCP logic. 2018-06-30 20:50:07 -06:00
Gregory Nutt
c65e1aa3df Squashed commit of the following: 
syscalls/:  Add syscall support for if_nametoindex() and if_indextoname()
    net/: Update some comments.
 2018-06-25 12:41:28 -06:00
Gregory Nutt
25686a9dac Remove if #if 0 logic. Update some comments. 2018-06-24 15:50:45 -06:00
Gregory Nutt
715d561c41 Trivial spelling corrections in comments; update some comments in a Kconfig file. 2018-06-24 15:01:49 -06:00
Gregory Nutt
0786b5d053 net/tcp: Re-think CONFIG_NET_TCP_RWND_CONTROL TCP windowing controls. 2018-06-24 14:46:12 -06:00
Gregory Nutt
433f29eea2 net/: Rename CONFIG_TCP_REASSEMBLY to CONFIG_IPv4_REASSEMBLY. Add some fixes to get a clen compile with CONFIG_IPv4_REASSEMBLY enabled. There are several problems with the current implementation: It is untested (and depends on CONFIG_EXPERMIMENTAL). It uses some Ethernet specific definitions (and depends on CONFIG_NET_ETHERNET). There is only a single reassembly buffer. The last two issues prevent use of this feature in any context where IPv4 packets may be reassembled for multiple network devices concurrently). 2018-06-24 12:06:12 -06:00
Gregory Nutt
a0e169ad7b net/: Fix a sixlowpan typo bug recently introduced; Rename g_ipv6_allzeroaddre with the more meaning g_ipv6_unspecaddr since the all-zero address is the IPv6 unspecified address (sometime IN6_ADDR_ANY). Remove more inline tests for IPv6 multicast with tcommint net_is_addr_mcast() macro. Update some comments. 2018-06-23 12:53:27 -06:00
Gregory Nutt
668df010ec Committed defconfigs for working configurations should never have CONFIG_EXPERIMENTAL set because the opens the doors for untested and incomplete configurations. Conversely, if there are released configurations that use features with dependencies on CONFIG_EXPERIMENTAL, then those configurations are in use and those dependencies should be removed: 
graphics/vnc/server/Kconfig:  Remove a dependency on CONFIG_EXPERIMENTAL
net/tcp/Kconfig:  Remove a dependency on CONFIG_EXPERIMENTAL
wireless/bluetooth/Kconfig:  Remove a dependency on CONFIG_EXPERIMENTAL

configs/lc823450-xgevk/audio/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/lc823450-xgevk/bt/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/lc823450-xgevk/ipl2/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/lc823450-xgevk/nsh/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/lc823450-xgevk/rndis/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/lc823450-xgevk/usb/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/lpcxpresso-lpc54628/netnsh/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/moxa/nsh/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/olimex-stm32-p407/module/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/photon/wlan/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sabre-6quad/smp/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sam4cmp-db/nsh/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sama5d4-ek/elf/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sama5d4-ek/knsh/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/samv71-xult/module/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/samv71-xult/vnc/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/samv71-xult/vnxwm/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sim/bluetooth/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sim/pf_ieee802154/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sim/pktradio/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sim/sixlowpan/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sim/traveler/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/sim/userfs/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/stm32f4discovery/hciuart/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/stm32f4discovery/pseudoterm/defconfig:  Remove CONFIG_EXPERIMENTAL=y
configs/teensy-3.x/usbnsh/defconfig:  Remove CONFIG_EXPERIMENTAL=y
 2018-06-17 10:30:01 -06:00
Gregory Nutt
8fdbb1e0a4 Elimate use of the non-standard type systime_t and replace it the equivalent, standard type clock_t 
Squashed commit of the following:

    sched:  Rename all use of system_t to clock_t.
    syscall:  Rename all use of system_t to clock_t.
    net:  Rename all use of system_t to clock_t.
    libs:  Rename all use of system_t to clock_t.
    fs:  Rename all use of system_t to clock_t.
    drivers:  Rename all use of system_t to clock_t.
    arch:  Rename all use of system_t to clock_t.
    include:  Remove definition of systime_t; rename all use of system_t to clock_t.
 2018-06-16 12:16:13 -06:00
Gregory Nutt
efed1b6aa1 net/udp: Remove an unused variable warning. Add some comments. 2018-04-27 18:26:38 -06:00
Pelle Windestam
303e6499bd net/tcp: Extended support for sending to non-blocking tcp sockets. 2018-04-20 07:37:51 -06:00
Gregory Nutt
b54ffe858a Standardization of some function headers. 2018-03-13 09:52:27 -06:00
Gregory Nutt
ae399b9b62 net/tcp: In tcp_input(), add the logic to detect, decode, and respond to TCP Keep-Alive packets. In tcp_timer(), fix some problems with the way that TCP Keep-Alive probes were being formatted. 2018-03-12 15:54:45 -06:00
Gregory Nutt
251924a734 Squashed commit of the following: 
net/tcp:  Add logic to send probes when SO_KEEPALIVE is enabled.
    net/tcp:  TCP socket should not have to be connected to configure KeepAlive.
    net/: Add a separate configuration to enable/disable KEEPALIVE socket options.
    net/tcp: Arguments to TCP keep-alive timing functions probably should be struct timeval as are the times for other time-related socket options.
    net/tcp:  Fix a backward conditional
    net/tcp:  Add some more checks and debug output to TCP-protocol socket options.
    net/tcp:  Cosmetic changes to some alignment.
    net/:  Adds socket options needed to manage TCP-keepalive and TCP state machine logic to detect if that the remote peer is alive.  Still missing the timer poll logic to send the keep-alive probes and the state machine logic to respond to probes.
 2018-03-12 10:59:46 -06:00
Gregory Nutt
9812f6f932 Trivial update to some comments 2018-02-22 18:42:27 -06:00
Gregory Nutt
3a2d0a06f4 net/tcp: Generalize Juho Grundstrom's IPv4 change for IPv6 as well. 2018-02-22 16:41:14 -06:00
Juho Grundstrom
13058858f2 net/tcp: tcp_send_[un]buffered.c: And header file inclusion missing in previous commit. 2018-02-22 16:30:46 -06:00
Juho Grundstrom
c065f0fd49 net/tcp: tcp_send_[un]buffered.c: Check routing table in psock_send_addrchck(). Previously only ARP table was considered when determining if the data will actually be sent. 2018-02-22 16:24:15 -06:00
Gianpaolo Ferroni Ariani
2c8eb5b240 net/tcp: Fixes hardfault when network goes done and network monitoring is in place. 2018-02-22 06:29:18 -06:00
Gregory Nutt
2c17bf21af net/tcp: Missing header file inclusion in tcp_wrbuffer.c 2018-02-14 09:23:55 -06:00
Pelle Windestam
e0142f1d52 net/tcp: Fixed bad return value handling in psock_tcp_send(). send() expects psock_tcp_send() to return a negated errno value, not -1 with the errno set (GN: I added same change for tcp_send_buffered.c which has the same issue as tcp_send_unbuffered.c) 2018-02-13 08:02:42 -06:00
Alan Carvalho de Assis
fb50c44d08 Fix various issues noted by Coverity 2018-02-06 09:13:16 -06:00
Gregory Nutt
7cf88d7dbd Make sure that labeling is used consistently in all function headers. 2018-02-01 10:00:02 -06:00
Gregory Nutt
82cb799bb6 net/udp: Fix memory leak with UDP + write buffer is closed. Also update TODO and comments and refresh a configuration. 2018-01-23 11:54:03 -06:00
Gregory Nutt
289e4dde06 net/udp and tcp: Yet another (cosmetic) change to UDP and TCP write buffer macro naming. 2018-01-22 19:33:14 -06:00
Gregory Nutt
fef255e5be This commit adds an as-of-yet untested implemented of UDP write buffering. 
Squashed commit of the following:

    net/udp:  Address most of the issues with UDP write buffering.  There is a remaining issue with handling one network going down in a multi-network environment.  None of this has been test but it is certainly ready for test.  Hence, the feature is marked EXPERIMENTAL.
    net/udp:  Some baby steps toward a corrected write buffering design.
    net/udp:  Remove pesky write buffer macros.
    Eliminate trailing space at the end of lines.
    net/udp:  A little more UDP write buffering logic.  Still at least on big gaping hole in the design.
    net/udp:  Undefined CONFIG_NET_SENDTO_TIMEOUT.
    net/udp:  Crude, naive port of the TCP write buffering logic into UDP.  This commit is certainly non-functional and is simply a starting point for the implementatin of UDP write buffering.
    net/udp:  Rename udp/udp_psock_sendto.c udp/udp_psock_sendto_unbuffered.c.
 2018-01-22 18:32:02 -06:00
Gregory Nutt
12d7125b75 net/tcp: Write buffering logic should not wait for a free buffer if the socket was opened non-blocking. Also, rename the TCP write buffering macros from WRB_* to TCPWB_* to make room in the namespace for write buffering with other protocols. 2018-01-22 11:11:23 -06:00
Masayuki Ishikawa
30070b06df Merged in masayuki2009/nuttx.nuttx/tcp_rcvwnd_control (pull request #555) 
net/tcp: Introduce tcp receive window control based on I/O buffer

NOTE: The algorithm is still experimental but useful for http streaming.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-12-18 12:11:52 +00:00
Gregory Nutt
5692e340ab Move comments describing a problem out of the code and into the TODO list where it belongs. 2017-10-25 12:37:02 -06:00
Gregory Nutt
c3ce23ba35 Cosmetic update to a document and some comments. 2017-10-25 11:17:38 -06:00
Gregory Nutt
8d023cb97f tcp_lost_connection() is called from two places in tcp_sendfile.c 2017-10-19 16:36:57 -06:00
Gregory Nutt
8c11a73d33 net/tcp: Same change to tcp_send_buffered.c probably also applies to tcp_sendfile.c. 2017-10-19 16:31:28 -06:00
Gregory Nutt
7d62a74915 Fix an error introduced in last commit. 2017-10-19 16:26:09 -06:00
Gregory Nutt
5a416be95b net/tcp: Same change to tcp_send_buffered.c probably also applies to tcp_send_unbuffered.c. 2017-10-19 16:14:38 -06:00
Gregory Nutt
cf5cba953d There was a possible recursion that could eventually overflow the stack. The error occurred when closing the socket with inet_close() while a socket callback was still queued. When the socket callback was executed by devif_conn_event(), this resulted in a call to psock_send_eventhandler() with TCP_CLOSE flag set which then called tcp_lost_connection(). tcp_shutdown_monitor() then called tcp_callback() again, which again called psock_send_eventhandler(), and so on.... Noted by Pascal Speck. Solution is also similar to a solution proposed by Pascal Speck. 2017-10-19 11:55:51 -06:00
Gregory Nutt
5ffd034f40 TCP Networking: When CONFIG_NET_TCP_WRITE_BUFF=y there is a situation where a NULL pointer may be dereferenced. In this configuration, the TCP connection's 'semi-permnanent' callback, s_sndcb was nullified in tcp_close_disconnect. However, other logic in tcp_lost_connection() attempt to use that callback reference after it was nullifed. Fixed in tcp_lost_connectino() by adding a NULL pointer change before the access. This was reported by Dmitriy Linikov in Bitbucket Issue 72. 2017-10-13 06:47:40 -06:00
Gregory Nutt
9568600ab1 Squashed commit of the following: 
This commit backs out most of commit b4747286b1.  That change was added because sem_wait() would sometimes cause cancellation points inappropriated.  But with these recent changes, nxsem_wait() is used instead and it is not a cancellation point.

    In the OS, all calls to sem_wait() changed to nxsem_wait().  nxsem_wait() does not return errors via errno so each place where nxsem_wait() is now called must not examine the errno variable.

    In all OS functions (not libraries), change sem_wait() to nxsem_wait().  This will prevent the OS from creating bogus cancellation points and from modifying the per-task errno variable.

    sched/semaphore:  Add the function nxsem_wait().  This is a new internal OS interface.  It is functionally equivalent to sem_wait() except that (1) it is not a cancellation point, and (2) it does not set the per-thread errno value on return.
 2017-10-04 15:22:27 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following: 
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
 2017-10-03 15:35:24 -06:00
Gregory Nutt
83cdb0c552 Squashed commit of the following: 
libc/semaphore:  Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable.  Changed all references to sem_getvalue in the OS to nxsem_getvalue().

    sched/semaphore:  Rename all internal private functions from sem_xyz to nxsem_xyz.  The sem_ prefix is (will be) reserved only for the application semaphore interfaces.

    libc/semaphore:  Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable.  Changed all references to sem_init in the OS to nxsem_init().

    sched/semaphore:  Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.

    sched/semaphoate:  Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
 2017-10-03 12:52:31 -06:00
Gregory Nutt
e761b80ea7 fs/vfs: file_read() is an internal OS interface and should not errors via the errno 2017-09-28 14:14:32 -06:00
Gregory Nutt
9043b9cb6a fs/vfs: file_seek() is an internal OS interface and should not errors via the errno 2017-09-28 13:55:36 -06:00
Bruno Herrera
24767a0c66 Fixes for problems found by Coverity in the nuttx repository: 
net/socket/recvfrom.c: Check fromlen integrity before using it.

    net/socket/net_sockets.c: Always check for valid psock before using.

    net/tcp/tcp_send_unbuffered.c:  Avoid using psock beforing checking its integrity.

    sched/timer/timer_create.c: Fix watchdog resource leak if cannot allocate a new timer.
 2017-09-25 07:17:09 -06:00
Gregory Nutt
cca15891c9 Networking: Fix some errors found by Coverity 2017-09-13 13:04:26 -06:00
Jussi Kivilinna
547733cbb0 Update net_timedwait() and net_lockedwait() call sites to handle negated errno in return value 2017-09-04 07:56:51 -06:00
Gregory Nutt
8ffb103adb networking: IGMP: Remove special support for interrupt level processing (there is none) and fix some timer cancellation logic. In many files, correct comments. There is no interrupt level processing in the networking layer. 2017-09-02 10:27:03 -06:00
Gregory Nutt
8c2e3a2d0a Networking: Fix a copy/paste error introduced with recent disconnection changes. 2017-09-01 11:56:48 -06:00
Gregory Nutt
7ebef900fb Networking: Fix a race condition. The accept() operation is performed with the network locked. However, the network is unlocked BEFORE the connected state is set. Therefore, a context switch may occur and the socket may no longer be connected when it is marked so. Noted by Pascal Speck. 2017-08-31 07:23:19 -06:00
Gregory Nutt
0b2a4eb4bd Networking: A little more wording changes related to interrupts vs. events 2017-08-29 15:08:38 -06:00
Gregory Nutt
04ad162540 Networking: Clean up some naming that has bothered me for a long time... There are no interrupts and no interrupt handlers in the network. There are events and event handler (there used to to be interrupt logic in there years ago but that is long, long gone). 2017-08-29 14:08:04 -06:00
Gregory Nutt
171d183e8e Networking: A placeholder for some missing logic in the previous change related to monitoring network status for dup'ed sockets. If one of the dup'ed socket's is closed, then network monitor resources associated with that one socket must be recovered. Also, in the event that socket is being used on one thread, but then closed on another, any threads waiting for events from the socket should be informed of the closure. That latter requirement is not implemented because current data structures do not support it. 2017-08-29 13:24:49 -06:00
Gregory Nutt
0f7a52bc28 Networking: Fix a runaway recursion problem introduced the previous fixe for shutting down dup'ed sockets. 2017-08-29 12:27:58 -06:00
Gregory Nutt
d40ee8e79d Networking: Start the network monitor for a socket when a TCP socket is dup'ed. 2017-08-29 10:53:04 -06:00
Gregory Nutt
9db65dea78 Networking: TCP disconnection callbacks are not retained in a list. This will support mutiple callbacks per lower-level TCP connection structure. That is necessary for the cae where a socket is dup'ed and shares the same lower-level connection structure. NOTE: There still needs to be a call to tcp_start_monitor() when the socket is dup'ed. 2017-08-29 10:38:01 -06:00
Gregory Nutt
ed58536c3a Networking: Move two more TCP specific files from inet/ to tcp/. There is other TCP-specific logic in inet/ that should be moved sometime, but those are more entangled. 2017-08-29 09:25:22 -06:00
Gregory Nutt
92f44c5607 Networking: Move net/inet/net_monitor.c to net/tcp/tcp_monitor.c in preparation for design change to fix monitoring of duplicated sockets. 2017-08-29 08:40:13 -06:00
Gregory Nutt
88a87f8e3f 6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started. 2017-08-26 10:00:47 -06:00
Gregory Nutt
aeb59383cf Remove CONFIG_NET_MULTILINK. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 15:26:09 -06:00
Gregory Nutt
bd7c84b23e Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code. 2017-08-08 14:24:12 -06:00
Gregory Nutt
835ae2999d networking: Move a little more to the inet/ subdirectory. 2017-08-07 13:03:23 -06:00
Gregory Nutt
2ada7d5892 IPv6: Remove comparisons to the address with all ones set. IPv6 does not support broadcast addresses and certainly not in that form. Replace with multicast addresses beginning with 0xff02. 2017-08-07 11:50:50 -06:00
Gregory Nutt
3c6981534f Networking: Move INET socket interface out of net/sockets to its own directory net/inet 2017-08-06 14:48:19 -06:00
Gregory Nutt
aa2e9c15a5 IP forwarding: Major rearchitecting of the outgoing portion of the IP forwarding logic necessary into to properly received device-related forwarding events. 2017-07-07 20:19:26 -06:00
Gregory Nutt
803235ad4b IP forwaring: Rename some files to get closer to other naming conventions. 2017-07-07 18:45:58 -06:00
Gregory Nutt
7258f1cbfc IP forwarding: Move to separate directory. A few fixes from early testing; In TUN driver, do all polling on worker thread. Otherwise, the stack gets very deep. 2017-07-07 18:33:06 -06:00
Gregory Nutt
8d81b35c44 network: Correct some issues that prevent TCP from working correctly when both IPv4 and IPv6 are enabled. 2017-07-07 08:50:01 -06:00
Gregory Nutt
b5d7187df6 IP forwarding design simplication; might save some memory. Also fix some compile issues introduce with last commit in MULTINIC configration. 2017-07-06 16:19:10 -06:00
Gregory Nutt
b297066eb9 IP Forwarding: Add IPv4 packet forwarding logic. Initial commit is an untested clone of the IPv6 forwarding logic with a few minor logic changes for IPv4. 2017-07-05 15:12:29 -06:00
Gregory Nutt
edf16c5805 IP forwarding: In check it the Ethernet MAC address is in the ARP/Neighbor table, add an additional check to skip in the case of CONFIG_NET_MULTILINK and the devices is not an Ethernet device. 2017-07-05 12:40:26 -06:00
Gregory Nutt
31f832d8c5 IP forwarding: Flesh out TCP, UDP, and ICMPv6 packet forwarding logic. 2017-07-05 11:01:16 -06:00
Gregory Nutt
c0c275c8fc IP forwarding. Adds a little more structure to handle passing packets received on one network device to another network device. Logic is still incomplete. 2017-07-04 10:19:52 -06:00
Gregory Nutt
83a875f394 IP forwarding: Add some fragments of TCP forwarding logic. 2017-07-03 15:58:01 -06:00
Gregory Nutt
5a8668b362 6LoWPAN TCP: Fix more ACK handling, fix some callback flag settings. Now the TCP test appears fully functional on 6LoWPAN. 2017-06-25 13:00:42 -06:00
Gregory Nutt
3203f0a93a 6LoWPAN TCP: Major re-architecting of TCP logic to properly handle TCP stuf like ACKs and TPC windowing which were not properly covered in the initial design. Still does not work; hangs waiting of ACKs. 2017-06-24 16:00:41 -06:00
Gregory Nutt
96af668ab8 6LoWPAN: Handle case where the local address is zero (listen socket) 2017-06-24 11:57:59 -06:00
Gregory Nutt
01b0a56371 TCP: tcp_input() now receives IP domain as an input parameter vs. deriving from the IP header length. 2017-05-25 08:02:08 -06:00
Masayuki Ishikawa
32a638cdfe TCP: Fix tcp_findlistner() in dual stack mode 
Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
 2017-05-25 16:54:19 +09:00
Gregory Nutt
56c8456ff0 Update some comments. 2017-05-16 07:38:57 -06:00
Gregory Nutt
914c5dad0c TCP: An RST recevied suring the 3-way handshake requires a little more clean-up 2017-05-15 08:10:43 -06:00
Gregory Nutt
aa57fb159d TCP: Send RST if applicaiton 'unlistens()' before we complete the connection sequence. 2017-05-14 13:30:59 -06:00
Gregory Nutt
8acfea1197 Fix some typos 2017-05-14 12:14:31 -06:00
Gregory Nutt
d339ba9e0e TCP: Fix some potential error conditions that could result from deferring the connection until the full 3-way handshake has completed. 2017-05-14 10:56:25 -06:00
Simon Piriou
8dc7f6d79e tcp: wait for 3-Way Handshare before accept() returns 2017-05-14 09:08:32 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Gregory Nutt
d5207efb5a Be consistent... Use Name: consistent in function headers vs Function: 2017-04-21 16:33:14 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
bcc6b61fc1 Move include/nuttx/net/iob.h to include/drivers/iob.h; rename CONFIG_NET_IOB to CONFIG_DRIVERS_IOB 2017-04-20 14:53:30 -06:00
Gregory Nutt
7cb34d969d 6loWPAN: More fixes from early debug. 2017-04-03 15:25:36 -06:00
Gregory Nutt
1b6630ee75 6loWPAN: Fix compile errors and warnings when building the complete 6loWPAN configuration. 2017-04-02 17:46:22 -06:00
Gregory Nutt
76406af71b 6loWPAN: Add support for sendto() 2017-04-02 11:15:46 -06:00
Gregory Nutt
732f0855c6 6loWPAN: Fleshes out framwork for IEEE802.15.4 send. But still has some gaping holes. 2017-03-31 15:09:07 -06:00
Jussi Kivilinna
cd3c9634c8 Add user-space networking stack API (usrsock) 
User-space networking stack API allows user-space daemon to
provide TCP/IP stack implementation for NuttX network.

Main use for this is to allow use and seamless integration of
HW-provided TCP/IP stacks to NuttX.

For example, user-space daemon can translate /dev/usrsock
API requests to HW TCP/IP API requests while rest of the
user-space can access standard socket API, with socket
descriptors that can be used with NuttX system calls.
 2017-03-31 08:58:14 -06:00
Gregory Nutt
64933246c3 6loWPAN: Tie 6loWPAN send into common socket send logic. 2017-03-28 14:08:54 -06:00
Gregory Nutt
ba2b345990 Remove a few remaining use of the obsolteted 'Compilation Switches' program section 2017-01-22 08:57:18 -06:00
Gregory Nutt
9f7d332028 Minor changes from the review of the last PR 2017-01-18 07:32:27 -06:00
Pascal Speck
2e074ca4f9 - Fixed some issues that prevented ipv6 to work with ipv4 enabled. 2017-01-18 10:57:15 +01:00
Gregory Nutt
7467329a98 Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed. 2016-12-03 16:28:19 -06:00
Gregory Nutt
2d057c28c8 net: Disable priority inheritance on all semaphores used for signaling 2016-11-03 12:17:02 -06:00
Gregory Nutt
9c3bade7b4 net/tcp: tcp_ipvX_bind() not actually using the ported selected with port==0. Also removes duplicate call to pkt_input(). Issues noted by Pascal Speck. 2016-08-30 07:59:57 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Jakub Łągwa
338b915008 While working with version 7.10 I discovered a problem in TCP stack that could be observed on high network load. Generally speaking, the problem is that RST flag is set in unnecessary case, in which between loss of some TCP packet and its proper retransmission, another packets had been successfully sent. The scenario is as follows: NuttX did not receive ACK for some sent packet, so it has been probably lost somewhere. But before its retransmission starts, NuttX is correctly issuing next TCP packets, with sequence numbers increasing properly. When the retransmission of previously lost packet finally succeeds, tcp_input receives the accumulated ACK value, which acknowledges also the packets sent in the meantime (i.e. between unsuccessful sending of lost packet and its proper retransmission). However, variable unackseq is still set to conn->isn + conn->sent, which is truth only if no further packets transmission occurred in the meantime. Because of incorrect (in such specific case) unackseq value, few lines further condition if (ackseq <= unackseq)is not met, and, as a result, we are going to reset label. 2016-06-20 06:55:29 -06:00
Gregory Nutt
7d0950bb22 net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors. 2016-06-12 07:09:37 -06:00
Gregory Nutt
f4fcdcdb4d net/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 17:37:21 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
86b79b33cf Reserver the name 'err' for other purposes 2016-06-11 14:40:07 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
c98f00a93b Update comments; trivial addtion to a document. 2016-06-10 09:36:59 -06:00
Gregory Nutt
4f208600aa Replace confusing references to uIP with just 'the network' 2016-05-30 09:31:44 -06:00
Gregory Nutt
2dd9777c7e Fix a backward conditional test introduced with the last commit 2016-03-20 09:58:07 -06:00
Gregory Nutt
00b44959ea TCP poll: TCP poll events can really only being processed when the poll from the correct device is received. 2016-03-20 08:39:15 -06:00
Gregory Nutt
4639cdd894 TCP timeouts: Fix some logic when there are multiple network interfaces. In this case, TCP timeout events can really only being processed when the poll from the correct device is received. 2016-03-20 08:19:00 -06:00
Gregory Nutt
2c95fef501 Remove some empty code section comments 2016-02-26 07:35:55 -06:00
Gregory Nutt
8db55f6493 Back out most of previous commit 2016-02-26 06:45:37 -06:00
Gregory Nutt
0b441ff1f4 net/: Add basic IEEE 802.15-4 socket support 2016-02-25 14:01:22 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Andrew Webster
49e5cc5a6f TCP: check for an active connection before cleaning it up 
If there is no active connection (e.g. it is waiting in accept), then
the connection object, which doesn't yet exist, should not be cleaned
up when the socket is closed.
 2016-01-22 16:22:09 -06:00
Andrew Webster
5e3023bef1 TCP: return from write when there is no buffer space 
During a write, if there is no more buffer space for the user data,
return the amount that was written instead of waiting until there
is free space.  If nothing has been written yet, then block as before.

This solves a deadlock that occurs if the user data is too large to
fit in the available buffer:  the write thread will block before any
data is added to the write queue, leaving no possibility that more
buffers will free up when they are ACKed (since they have not yet been
sent).  The write thread will then block forever and hold all of the
buffers.
 2016-01-22 16:19:20 -06:00
Andrew Webster
cdd187a7f3 TCP: check for sndcb before using it 2016-01-22 15:54:45 -06:00
Andrew Webster
df211ee46a TCP: add writable check during poll 
When a poll requesting POLLOUT happens, the poll should return
immediately if a write will not block.  This change adds that, as
opposed to the old behaviour of blocking until a timer from the
Ethernet driver eventually triggers the poll to complete.

This is only implemented for buffered TCP.  Unbuffered TCP should
behave as before.
 2016-01-22 15:52:14 -06:00
Andrew Webster
99f5fcda70 iTCP: use lowlevel syslog to avoid infinte recursion 
If stdout is a socket (e.g. telnet), then the debug message will cause
more TCP data to be sent, which generates another message, and so on
 2016-01-22 15:41:48 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
6209c51206 net/: More clean-up of spacing/alignment issues 2015-10-08 15:10:04 -06:00
Gregory Nutt
0b12dbf95d Fix some spacing problems 2015-10-04 15:04:00 -06:00
Gregory Nutt
cb9e27c3b0 Standardize naming used for public data and function groupings 2015-10-02 16:30:35 -06:00
Gregory Nutt
d700793077 Fix a compile error when IPv6 is enabled 2015-09-07 16:34:25 -06:00
Alan Carvalho de Assis
f10a103108 Fix tcp_send_unbuffered when NET_ETHERNET is not defined. 2015-09-07 13:31:35 -06:00
Gregory Nutt
9c66bde5b0 Fix typo in pre-processor command noted by Pierre-noel Bouteville. Also move # of pre-processior command to column 1 2015-09-05 09:10:48 -06:00
Gregory Nutt
14297afb83 Cosmetic fix to break up long line 2015-09-03 07:33:50 -06:00
Gregory Nutt
36f4d0e9fc Fix a error in some comments 2015-09-02 20:03:28 -06:00
Gregory Nutt
0e2986f131 net/tcp: The logic that binds a specific networkd device to a connection was faulty for the case of multiple network devices. On bind(), the local address should be used to associate a device with the connection (if the local address is not INADDR_ANY); On connect(), the remote address should be used (in case the local address is INADDR_ANY). On accept(), it does not matter but the remote address is the one guarenteed to be available. 2015-09-02 19:48:31 -06:00
Gregory Nutt
9fcad39a45 Trivial typo fix 2015-09-02 10:09:33 -06:00
Gregory Nutt
63071a563a Costmetic changes 2015-08-27 10:38:43 -06:00
Gregory Nutt
b1e09d4847 net/socket and net/tcp: Fix a problem in whent there are multiple network devices. Polls were being sent to all TCP sockets before. This is not good because it means that packets may sometimes be sent out on the wrong device. That is inefficient because it will cause retransmissions and bad performance. But, worse, when one of the devices is not Ethernet, it will have a different MSS and, as a result, incorrect data transfers can cause crashes. The fix is to lock into a single device once the MSS is locked locked down. 2015-08-27 09:06:46 -06:00
Gregory Nutt
3bcdb218ff Networking: Get rid of the tcp_mss macro. It is confusing and only obfuscates what is really going on 2015-08-27 08:39:17 -06:00
Gregory Nutt
007aabc46f Fix a badly formatted comment 2015-08-26 19:18:04 -06:00
Anton D. Kachalov
b125c36849 Field `d_sndlen' is unsigned. It is always >= 0. 
Signed-off-by: Anton D. Kachalov <mouse@yandex-team.ru>
 2015-08-26 00:16:52 +03:00
SaeHie Park
e983e547e1 Networking: Correct return value from psock_tcp_accept(). From SaeHie Park 2015-08-25 07:15:21 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
8f7752d956 Networking: Modify how callback structures are stored to avoid another potential use of a stal pointer. 2015-06-03 08:11:57 -06:00
Gregory Nutt
33085cb309 Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert. 
The solution here is to eliminate the device devices semaphore altogether.  This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
 2015-05-31 08:34:03 -06:00
Gregory Nutt
6687e156e6 Revamp last change. IFF_UP only required when allocating callback, not freeing. 2015-05-30 21:13:58 -06:00
Gregory Nutt
8b029fbbee TCP networking: Hook the network monitor into the device event notification logic 2015-05-30 11:29:47 -06:00
Gregory Nutt
933b95ac80 Forgot to add a file in the last commit 2015-05-30 09:17:46 -06:00
Gregory Nutt
04a661a97c TCP networking: Add support for network driver events 2015-05-30 09:12:27 -06:00
Gregory Nutt
ab50e9d04d Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST 2015-05-29 15:16:11 -06:00
Gregory Nutt
e672bcebfd UDP Networking: Add support for device event notification for UDP transfers. 2015-05-29 10:21:06 -06:00
Gregory Nutt
b5c005d5a4 Merge remote-tracking branch 'origin/master' into multinic 
Conflicts:
	nuttx/ChangeLog
 2015-05-28 19:30:48 -06:00
Gregory Nutt
e81f279315 Networking: Modify event list handling: Now there are two event lists each device structure: (1) One is for ARP and ICMP data related evetns, the other is for device related events. Callback allocation/free routines no accept a device paramter as well as a list: If the device paramter is added, then the callback goes into both the connection-related liast AND the device event list. Thus each socket type can received both custom data-related events as well as common device related events. 2015-05-28 12:01:38 -06:00
Gregory Nutt
01d176af76 net_startmonitor.c always returned zero. In the case where a socket has already been closed, it correctly handled the disconnetion event but still returned OK. Returning OK causes the callers of net_startmonitor to assume that the connection was okay, undoing the good things that net_startmonitor did and causing the socket to be marked as connected. This behavior was noted by Pelle Windestam. 2015-05-28 08:23:51 -06:00
Gregory Nutt
d6c3ed1c6f Networking: Fixes an important TCP bug: 16-bit flags was being converted to 8-bits in a few locations, causing loss of status indications 2015-05-27 17:17:42 -06:00
Gregory Nutt
1f3ee83134 Increase the size of the number of bytes sent from uint16_t to uint32_t in order to avoid TCP errors with long sessions. For exmple: 
int hello_main(int argc, char *argv[])
{
   uint32_t i;
   for(i = 0; i < 65536; i++)
    {
      printf("Hello, World!!\n");
    }

  printf("press any key!!\n");
  if (getchar()=='t')
    return 0;
  else
    return 1;
}

When ran in a Telnet session, the "press any key" is not displayed because the tcp session closed unexpectedly with:

tcp_input: ERROR: conn->sndseq xx, conn->unacked xx"

This is fixed by increasing the width of conn->sent to 32-bits to prevent overflow.

From Rony XLN
 2015-05-11 07:14:25 -06:00
Gregory Nutt
a82b8fd71f Networking: Fix several build errors/warning with IPv4 + IPv6 + multiple networks are enabled. 2015-02-10 06:54:10 -06:00
Gregory Nutt
b756df982d net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing. 2015-02-09 18:15:34 -06:00
Gregory Nutt
a07a764d42 ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation). 2015-02-02 13:44:31 -06:00
Gregory Nutt
6d7891c4de Fix compile issues with configs/sim/nettest 2015-02-01 12:00:30 -06:00
Gregory Nutt
52f9a2744c Should fix another warning reported by Travis 2015-01-30 08:57:35 -06:00
Gregory Nutt
a438784054 Forgot to add a file in the last commit 2015-01-30 07:28:30 -06:00
Gregory Nutt
5736cf10af Networking: Separate TCP poll logic out of net/sockets/net_poll.c and move it into the new net/tcp/tcp_netpoll.c. 2015-01-30 07:25:01 -06:00
Gregory Nutt
de91d34a19 Networking: Separate out UDP poll logic from socket/net_poll.c into a new udp/udp_netpoll.c; Create a skeleton local/local_netpoll.c for future poll support on Unix domain sockets. 2015-01-30 07:09:25 -06:00
Gregory Nutt
ccc72edc0b Networking: Add UDP read-ahead support and support for poll/select on UDP sockets. From Macs N. 2015-01-30 06:08:26 -06:00
Gregory Nutt
9c2af5317f Merge remote-tracking branch 'origin/master' into afunix 2015-01-28 12:03:43 -06:00
Gregory Nutt
371a9fd84c Networking: Fix another deadlock condition. tcp_write_buffer_alloc() calls sem_wait() with network locked. That worked if CONFIG_NET_NOINTS was not defined because interrupts are automatically restored when the wait happens. But with CONFIG_NET_NOINTS=y, the wait blocks with the network locked -- bad style and also can lead to a deadlock condition 2015-01-28 11:56:11 -06:00
Gregory Nutt
5f9837dcc8 Merge remote-tracking branch 'origin/master' into afunix 
Conflicts:
	nuttx/ChangeLog
 2015-01-27 21:47:12 -06:00
Gregory Nutt
c4bd6f52b5 Networking: The are issues with the TCP write-ahead buffering if CONFIG_NET_NOINTS is enabled: There is a possibility of deadlocks in certain timing conditions. I have not seen this with the Tiva driver that I have been users but other people claim to see the issue on other platforms. Certainly it is a logic error: The network should never wait for TCP read-ahead buffering space to be available. It should drop the packets immediately. 
This was fixed by duplicating most of the IOB interfaces:  The versions that waited are still present (like iob_alloc()), but now there are non-waiting verisons of the same interfaces (like iob_tryalloc()).  The TCP read-ahead logic now uses only these non-waiting interfaces.
 2015-01-27 21:23:42 -06:00
Gregory Nutt
f756545eb0 Networking: Add local Unix domain socket accept logic 2015-01-25 16:27:25 -06:00
Gregory Nutt
90e59217c6 Networking: Move TCP specific logic out of net/socket/accept.c to net/tcp/tcp_accept.c; add hooks for local, Unix doamin sockets 2015-01-25 15:46:05 -06:00
Gregory Nutt
0def771c8d Networking: Move TCP specific logic out of net/socket/accept.c to net/tcp/tcp_accept.c; add hooks for local, Unix doamin sockets 2015-01-25 15:45:51 -06:00
Gregory Nutt
f4bb7f14e1 Networking: Clean up network status collection and presentation for IPv6 2015-01-24 08:26:12 -06:00
Gregory Nutt
c77426e550 Cosmetic changes to comments; refresh configuration 2015-01-22 14:46:36 -06:00
Gregory Nutt
eac4ea7ae5 Networking: Back out a previous change. It is incorrect 2015-01-22 12:10:16 -06:00
Gregory Nutt
46fc574f0f Forgot to remove some debug instrumentation in the last commit 2015-01-22 10:35:11 -06:00
Gregory Nutt
7106469191 Armv7-M: Remove Px4-only setting of stack to 0xff. This is incompatible with standard NuttX stack montitoring logic 2015-01-22 10:09:10 -06:00
Gregory Nutt
5e23a855ec More typos in debug statements 2015-01-21 10:32:59 -06:00
Gregory Nutt
354bc626ab Fix a typo introduced in the last commit 2015-01-21 10:31:18 -06:00
Gregory Nutt
3202819328 IPv6 -- various fixed from problems found in testing 2015-01-21 10:29:18 -06:00
Gregory Nutt
5d31687e75 Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family 2015-01-20 18:14:09 -06:00
Gregory Nutt
2842b5c5d6 Networking: Fix some problems with debug is enabled; fix a warning 2015-01-19 10:16:37 -06:00
Gregory Nutt
eb3c6e8390 Networking: Some fixes for compilation when both IPv4 and IPv6 are enabled 2015-01-18 09:23:22 -06:00
Gregory Nutt
f7663ef0ab Networking: Final detangle off IPv4 and IPv6 TCP/UDP send logic. The Networking subsystem now compiles with IPv6 enabled 2015-01-18 08:56:05 -06:00
Gregory Nutt
ea52bda8f9 Networking: Add IPv6 suppport to TCP application level sending logic 2015-01-17 18:18:19 -06:00
Gregory Nutt
d8b046f2fb Networking: Fix a simple IPv6 compile error 2015-01-17 17:48:15 -06:00
Gregory Nutt
86f617cc88 Networking: Straighten up use if IPv6/IPv4 in TCP connection logic 2015-01-17 17:07:54 -06:00
Gregory Nutt
b187b4f381 Networking: Straighten up use if IPv6/IPv4 in TCP connection logic 2015-01-17 15:17:35 -06:00
Gregory Nutt
f7681dbb43 Networking: Detangling IPv6/4 logic in UDP connection structures 2015-01-17 14:13:56 -06:00
Gregory Nutt
94f9312150 Networking: Save the IP domain in the connection structure 2015-01-17 13:07:48 -06:00
Gregory Nutt
e2933ca4cc Networking: Oops. Forgot to add a couple of files that were part of an earlier commit 2015-01-17 09:35:27 -06:00
Gregory Nutt
820509eadc Networking: Fix accept() so that it returns the correct IP address for the selected socket IP domain. 2015-01-17 09:27:05 -06:00
Gregory Nutt
4ad5998db3 net/socket and net/tcp: When we are ready to receive data or when we have outgoing data ready to be sent, we need to the notify the appropriate device driver of this condition. The notifying socket will be configured as either PF_INET or PF_INET6 and must look up the correct driver using the correct IP domain. 2015-01-17 08:33:14 -06:00
Gregory Nutt
2c251d845c include/net/if.h: Add a bit to the device flags to indicate if the device packet buffer holds an IPv4 or an IPv6 domain packet. Set/clear the flag along with the correct offset to the application payload data as each packet is received. 
net/socket, net/tcp, net/udp:  Add logic to select the domain of the outputgoing packet before sending any UDP or TCP packet.  This sets the bit to indicate the IPv4 or IPv6 domain and the correct offset to the output going payload data.
 2015-01-17 07:42:09 -06:00
Gregory Nutt
88a0e82934 Networking: Remove field d_sndata from the device structure. It is the same as d_appdata and unnecessary 2015-01-17 05:59:13 -06:00
Gregory Nutt
8f8259a0d6 Networking: UDP and TCP MSS depends on the IP header size (as well as the link layer header size) and cannot be represented with a single value. 2015-01-16 15:03:10 -06:00
Gregory Nutt
2663538b0a Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other. 2015-01-16 13:01:08 -06:00
Gregory Nutt
5e938941a6 Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t. 2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4 Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections 2015-01-16 10:01:54 -06:00
Gregory Nutt
5b45605991 Clean a few more IPv6 compilation issues; Add implementation of net_ipv6_maskcmp() 2015-01-15 15:55:52 -06:00
Gregory Nutt
630366272a Networking: Seperate tcp_input() and udp_input() into seprate functions tcp_ipv4_input(), tcp_ipv6_input(), udp_ipv4_input(), and upd_ipv6_input() than can deal will the data offsets caused by the differing sizes of the IP header. 2015-01-15 15:06:46 -06:00
Gregory Nutt
60e50ff3b5 Networking: More IPv6 detanglement 2015-01-15 13:08:28 -06:00
Gregory Nutt
a7ce1279f9 Networking: (1) Copied all ICMP sources files to net/icmpv6 with proper renaming and removal of IPv4 logic, (2) remove IPv6 logic from files in net/icmp, (3) copied include/nuttx/icmp.h to icmpv6.h and removed IPv4 specific logic, (4) removed all IPv6 logic from icmp.h, (5) IP_HDRLEN became IPv4_HDRLEN and IPv6_HDRLEN, (6) ip_chksum() became ipv4_chksum() and ipv6_chksum(), and (7) added partial support for ICMPv6 statistics. 2015-01-14 16:10:38 -06:00
Gregory Nutt
a6a9452c05 net/tcp/tcp_conn.c: Fix a logic error when CONFIG_NETDEV_MULTINIC is selected: net_unlock(flags) will be called will an uninitialized variable (2015-01-03). 2015-01-02 12:03:08 -06:00
Gregory Nutt
b36dbe1d89 Add logic to netdev_findbyaddr() to return the correct network device for the case where a broadcast address is used. This change caused trivial ripples through other files because additional parameters are required for netdev_findbyaddr() when CONFIG_NET_MULTINIC 2014-11-23 11:00:22 -06:00
Gregory Nutt
dc7a45ecf8 Extensions to ECP conneciton structure for the case of multiple networks. See additional comments regarding the similar change for UDP 2014-11-22 10:46:37 -06:00
Gregory Nutt
80fc094734 Make tcp_listener static scope; it is not used outside of tcp_conn.c 2014-11-22 07:14:17 -06:00
Gregory Nutt
38754a3466 Completes basic changes to support per-device/per-link TCP receive window size 2014-11-16 11:15:21 -06:00
Gregory Nutt
859748a94e Completes conversion of CONFIG_NET_BUFIZE to CONFIG_NET_ETH/SLIP_MTU 2014-11-16 09:22:38 -06:00
Gregory Nutt
2e55db369d Network: All logic will now handle varialbe length link layer protocol headers within incoming packets. This permits use of multiple network interfaces with differing data links. For example, ETHERNET + SLIP 2014-11-15 13:13:23 -06:00
Gregory Nutt
0abe6c66d7 Update everything under nuttx/net to use the corrected syslog interfaces 2014-10-08 10:48:11 -06:00
Gregory Nutt
205260d5e2 Reanem kzalloc to kmm_zalloc for consistency 2014-08-31 17:34:44 -06:00
Gregory Nutt
54fa3b0b59 Rename kfree to kmm_free for consistency with other naming conventions 2014-08-31 17:04:02 -06:00
Gregory Nutt
6e04518e4a If CONFIG_NET_ARP_SEND is enabled, then all ICMP, TCP, and UDP send operations will call arp_send() before attempting the real send operation. arp_send() will check if the the IP address mapping is in the ARP table and, if not send ARP requests periodically until it is. This eliminates losing the first outgoing message because there is not mapping in the ARP table. 2014-08-18 16:22:14 -06:00
Gregory Nutt
caba61999a Remove CONFIG_DISABLE_CLOCK 2014-08-07 12:35:24 -06:00
Gregory Nutt
e89eac6365 NET: Fix a few problems after big merge of network reorganization 2014-07-06 17:58:36 -06:00
Gregory Nutt
73f3ecf7e2 NET: Rename network interrupt event flags more appropriately: TCP_, UDP_, ICMP_, or PKT_ vs UIP_ 2014-07-06 17:22:02 -06:00
Gregory Nutt
a251259f90 NET: Rename some non-configurable constants UIP_ to IP_ or TCP_ 2014-07-06 16:19:26 -06:00
Gregory Nutt
b77fda2c95 NET: Rename TCP state values: UIP_ -> TCP_ 2014-07-06 16:10:26 -06:00
Gregory Nutt
1f11a452dd NET: Add a few missing configuration options to the Kconfig files 2014-07-06 13:04:27 -06:00
Gregory Nutt
2d52d70d4c NET: Move private definitions from include/nuttx/net/tcp to net/tcp/tcp.h 2014-07-06 12:34:27 -06:00
Gregory Nutt
9e87ab90b8 NET: Move private definitions from include/nuttx/net/arp.h to net/arp/arp.h 2014-07-06 11:05:28 -06:00
Gregory Nutt
c5fc24e110 NET: Standardize naming of all protocal header lengths 2014-07-05 13:04:48 -06:00
Gregory Nutt
60246e613b NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
0bb153b8cb Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
a6b39d1879 NET: in-progress change... don't use 2014-07-04 16:38:51 -06:00
Gregory Nutt
cce35ce975 NET: More renaming 2014-07-04 15:40:49 -06:00
Gregory Nutt
8e9df8ade0 NET: Misc naming clean-up 2014-07-02 17:23:25 -06:00
Gregory Nutt
85f42044df NET: Rename uip_dataevent to tcp_data_event 2014-06-30 19:17:22 -06:00
Gregory Nutt
b54d366efd NET: Remove uip_restart() 2014-06-30 19:14:01 -06:00
Gregory Nutt
77330679d4 NET: Rename uip_mss to tcp_mss 2014-06-30 19:09:23 -06:00
Gregory Nutt
7dd04db1d2 NET: Rename uip_nextXYZconn to XYZ_netconn 2014-06-30 18:03:58 -06:00
Gregory Nutt
ad3e39e53d NET: Rename uiphdr_ipaddr_copy to net_ipaddr_hdrcopy, uip_ip4addr_conv to net_ip4addr_conv32, and uip_ethaddr_cmp to eth_addr_cmp 2014-06-29 13:20:00 -06:00
Gregory Nutt
c362f21815 NET: Rename uip_ipaddr* to net_ipaddr* 2014-06-29 13:11:08 -06:00