sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,004 Commits 1 Branch 0 Tags 291 MiB
3d384de76f
Commit Graph

1084 Commits

Author SHA1 Message Date
Gregory Nutt
64ba574ecc Move files to net/utils; make appropriate name changes, most for uip_lock to net_lock 2014-06-26 14:23:21 -06:00
Gregory Nutt
621097b6c8 Rename ip_eth_hdr to eth_hdr_s 2014-06-25 09:57:52 -06:00
Gregory Nutt
5d1f8180d4 Move the remaining files from include/nuttx/net/uip to include/nuttx/net; Rename *_internal.h header files in net/ to just *.h 2014-06-24 10:14:15 -06:00
Gregory Nutt
37646044ac Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/netdev.h 2014-06-24 09:28:44 -06:00
Gregory Nutt
8b450d6d1b SAMA5D4: Add EMAC driver 2014-06-11 12:23:31 -06:00
Gregory Nutt
6f9bcd321c Config/build changes to better support the RTL8187 2014-06-09 09:11:04 -06:00
Gregory Nutt
2e08560fa0 Clear rxhead on disconnect to prevent data from being resent on re-connect 2014-06-06 10:34:58 -06:00
Gregory Nutt
90e4b55e0c Move include/nuttx/net/uip/uip-arch.h to include/nuttx/net/arp.h; rename all uip_arp_ functions to arp_ 2014-05-30 12:13:06 -06:00
Gregory Nutt
6f3cb90c05 Cosmetic changes 2014-05-28 14:09:58 -06:00
Gregory Nutt
2abe0dd6dd Change all variadic macros to C99 style 2014-05-22 09:01:51 -06:00
Gregory Nutt
2a509d560f CC3000: Fix build when POLL is enabled. From Jussi Kivilinna. 2014-05-21 07:37:46 -06:00
Gregory Nutt
b584ecb967 CC3000: Fix a race condition in start-up of unsoliced_thread. From Jussi Kivilinna 2014-05-21 07:32:32 -06:00
Gregory Nutt
b2d26436de Configuration has CC3000_SPI_MODE settings but source uses CONFIG_CC3000_SPIMODE. From Jussi Kivilinna 2014-05-21 07:20:09 -06:00
Gregory Nutt
a9d89b5442 Correct SPI mode for CC3000 is CPOL=0 CHPA=1. From Jussi Kivilinna 2014-05-21 07:17:46 -06:00
Gregory Nutt
c48bd737d0 SAM4E-EK: Add a driver for the on-board LCD (not tested on initial check-ing) 2014-05-13 10:38:46 -06:00
Gregory Nutt
ddf151c226 A fix to the last MB85RS1MT patch 2014-05-12 21:42:06 -06:00
Gregory Nutt
e3373aaf39 Add support for Fujitsu MB85RS1MT part. From Charles Ash 2014-05-12 18:43:06 -06:00
Gregory Nutt
b5efb9dd77 Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:01:14 -06:00
Gregory Nutt
7594d8b8cf Add serial method so that lower half driver can provide RX flow control information. From Jussi Kivilinna 2014-05-08 09:00:33 -06:00
Gregory Nutt
35e94a5be4 LIS331DL driver: Correct build dependency. Sourceforge ticket #41 from Kosma Moczek 2014-05-08 07:39:10 -06:00
Gregory Nutt
f06e9dbcaa Timer driver updates from Bob Doiron 2014-05-05 14:40:19 -06:00
Gregory Nutt
d897b4de76 Enhanced timer interface from Bob Doiron 2014-04-30 14:08:34 -06:00
Gregory Nutt
020583efa2 drivers/mtd/w25.c: Add support for the 8Mbit W25Q80BV part. From Mark Whitehorn. 2014-04-30 13:31:42 -06:00
Gregory Nutt
d119e4c977 Update TODO list and comments 2014-04-23 13:02:00 -06:00
Gregory Nutt
465bfcb4cf Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
Gregory Nutt
972c4cbab5 Nucleo F401RE: Remove PX4 cruft that can in with the port 2014-04-22 12:18:08 -06:00
Gregory Nutt
5df14c7d40 Misc changes to get a clean compilation after incorporating all of Bob Doison's changes 2014-04-22 10:38:08 -06:00
Gregory Nutt
61555fe5e1 Various SAM4S related fixes, mostely related to the timer driver driver and the SAM4S timer/counter. All from Bob Doisin 2014-04-22 09:01:20 -06:00
Gregory Nutt
df33d9bcc8 examples/serialrx added by Bob Doison 2014-04-22 08:40:48 -06:00
Gregory Nutt
3884117ae9 Missing watchdog timer configuration setting 2014-04-21 19:13:21 -06:00
Gregory Nutt
5d7da97a35 SDIO-based MMC/SD improvements from Bob Doiron 2014-04-21 17:15:42 -06:00
Gregory Nutt
9485fbf66e SAM3/4 Interrupt initialization. Default interrupt priority not being set correctly 2014-04-17 14:02:22 -06:00
Gregory Nutt
b83702dd8a HID mouse: Don't include NAKs in error count. From Leo 2014-04-17 11:47:00 -06:00
Gregory Nutt
f58767ce79 MIO183QT-9A LCD driver updated to support reading from the LCD. From Toby Duckwork 2014-04-16 12:17:35 -06:00
Gregory Nutt
7ad2ace833 Costmetic changes to some comments 2014-04-14 16:36:07 -06:00
Gregory Nutt
48cdbfe5ba examples/touchscreen: Add a configuration option to indicate that there is or is not an architecture-specific initialization function 2014-04-14 12:26:49 -06:00
Gregory Nutt
3a1324741a More trailing whilespace removal 2014-04-13 14:32:20 -06:00
Gregory Nutt
f7e5953804 Cosmetic changes for coding style; removal of dangling spaces at the end of lines 2014-04-13 13:18:06 -06:00
Gregory Nutt
494387b33b Make sure that there is one space after for 2014-04-12 13:28:22 -06:00
Gregory Nutt
056aed1274 Make sure that there is one space between while and condition 2014-04-12 13:09:48 -06:00
Gregory Nutt
303cc1902b Make sure that there is one space between if and condition 2014-04-12 12:53:19 -06:00
Gregory Nutt
3ae029fbe7 STM32 OTGFS Host: Fix a logic error introduced in the last check-in 2014-04-12 09:33:52 -06:00
Gregory Nutt
2fcc57edb0 mv ramlog.h and syslog.h to new include/nuttx/syslog 2014-04-10 09:29:30 -06:00
Gregory Nutt
6578d646da Back out part of 610e2aa0c224e2936fe8009ef4a2351ce607067a: Need to be able to select USB console devices when there is no /dev/console enabled. Noted by Librae 2014-04-08 11:04:25 -06:00
Gregory Nutt
27811d28f9 Cosmetic changes to comments and README 2014-04-07 15:28:04 -06:00
Gregory Nutt
4d25119e62 Fix various typos in comments. From Alan Carvalho de Assis 2014-04-06 09:02:02 -06:00
Gregory Nutt
6c5535cc38 SAMA5 clocking: USB clock setup needs to be done no matter the state of BMS and not matter how we are booting 2014-04-05 11:53:20 -06:00
Gregory Nutt
abca33bd6b Cosmetic update to comments 2014-04-05 11:35:05 -06:00
Gregory Nutt
cbdc9155ab SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console 2014-04-01 11:24:15 -06:00
Gregory Nutt
060b84240b Add macro UNUSED to eliminate warnings about variables that are set to unused values 2014-03-30 07:58:58 -06:00
Gregory Nutt
a37c158659 Add missing MIO283QT-9A to the drivers/lcd/Kconfig 2014-03-27 07:38:02 -06:00
Gregory Nutt
6179cdfb91 Eliminate a warning when debug is off 2014-03-26 17:04:13 -06:00
Gregory Nutt
b951732a2b Reimagine the USB MSC worker thread as a kernel thread (instead of a pthread) 2014-03-25 14:19:27 -06:00
Gregory Nutt
30c34c07cf Add an MTD driver to wrap another MTD driver and makes is sector size look like 512 bytes 2014-03-24 17:45:45 -06:00
Gregory Nutt
baa91448e6 net/netdev_findbyaddr.c: Skip network devices that are in the down state. They have no meaning address 2014-03-20 17:27:59 -06:00
Gregory Nutt
b0c2b54ec9 If DCD supports queuing of stall requests then USB MSC delay work-around is not necessary 2014-03-20 15:20:50 -06:00
Gregory Nutt
c6127ad09d If DCD supports queuing of stall requests then USB MSC delay work-around is not necessary 2014-03-20 15:20:24 -06:00
Gregory Nutt
f139391f8a SAM4E UDP: Several fixes related to bulk endpoint transfers 2014-03-20 14:25:56 -06:00
Gregory Nutt
fe9023752a SAM4E: Revise board-specific USB MSC support 2014-03-18 09:31:02 -06:00
Gregory Nutt
42e06fb503 SAM4E-EK: Add support for the SAM4E-EK AT25 serial flash 2014-03-13 14:07:35 -06:00
Gregory Nutt
113d5a2a81 Correct an error introduced in this file in very recent commits 2014-03-06 15:33:02 -06:00
Gregory Nutt
4bbbe80a31 configs/rgmp/x86/default: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:47:16 -06:00
Gregory Nutt
29a4ca8f08 configs/rgmp/arm/default: Configuration converted to use the kconfig-frontends tools 2014-03-06 11:19:05 -06:00
Gregory Nutt
17a96f6e1e configs/us7032evb1/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 09:17:11 -06:00
Gregory Nutt
86d7618733 configs/skp16c26/ostest: Configuration converted to use the kconfig-frontends tools 2014-03-06 08:28:49 -06:00
Gregory Nutt
a2a3f80120 configs/ntosd-dm320/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-05 12:16:02 -06:00
Gregory Nutt
2c1b3188e7 onfigs/ez80f910200zco/nettest: Configuration converted to use the kconfig-frontends tools 2014-03-03 11:40:29 -06:00
Gregory Nutt
9fd85aec9e configs/olimex-lpc1766stk/nx converted to use the kconfig-frontends 2014-03-02 12:26:52 -06:00
Gregory Nutt
077b211456 Bug fix for the MIO283QT-9A driver from Toby Duckwork 2014-02-19 10:57:32 -06:00
Gregory Nutt
6092b5813a Numerous updates to the CC3000 driver from David Sidrane 2014-02-18 14:16:51 -06:00
Gregory Nutt
6b4796fa5a Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
Gregory Nutt
91b002a043 Many changes to reduce complaints from CppCheck. Several latent bugs fixes, but probably some new typos introduced 2014-02-10 18:08:49 -06:00
Gregory Nutt
8b1d3f6698 remove some unnecessary header files 2014-02-10 14:28:18 -06:00
Gregory Nutt
8ef272911e Update comments in file headers 2014-02-10 13:58:08 -06:00
Gregory Nutt
a9b01d5824 Support for the MIO283QT9A LCD from Toby Duckworth 2014-02-10 12:26:08 -06:00
Gregory Nutt
0070815e87 HID mouse can now support some while mice. Problems with Microsoft mice 2014-02-10 11:53:37 -06:00
Gregory Nutt
752767cfc1 Add a mouse interface that is similar to the touchscreen interface except that it can handle multple buttons and continuously reports positional data so that it can control a cursor 2014-02-10 10:14:22 -06:00
Gregory Nutt
0979cdba0e The USB HID mouse driver is now functional. There are some usage issues as described in the top-level TODO list 2014-02-09 17:40:23 -06:00
Gregory Nutt
2b40128148 USB HID mouse: Fixes the basic data transfer model. Returned position data is still bad 2014-02-09 16:50:09 -06:00
Gregory Nutt
66e4693781 USB HID mouse: Automatically select CONFIG_INPUT with USB HID mouse is selected 2014-02-09 15:57:59 -06:00
Gregory Nutt
0e486c953b Add support for a USB HID mouse. Untested on initial check-in 2014-02-09 13:49:31 -06:00
Gregory Nutt
7b084fcba8 Fix typos in comments 2014-02-09 13:47:11 -06:00
Gregory Nutt
c95cd438ef Minor typo fixes 2014-02-09 13:43:43 -06:00
Gregory Nutt
9f46dac1e2 Add option to indicatet that data is retained in SDRAM 2014-01-28 10:42:49 -06:00
Gregory Nutt
9e2640b896 Networking: Improved status reporting and new carrier management interfaces. From Max Holtzberg 2014-01-21 10:21:45 -06:00
Gregory Nutt
803cdfdaf1 Changes to get PX4 config to build. Also some warning removal 2014-01-14 13:30:22 -06:00
Gregory Nutt
73aa375b87 Add GCc 4.8.2 support for buildroot 2013-12-26 13:24:06 -06:00
Gregory Nutt
0d6a046e67 Add support for Sharp Memory LCD on the Maple board 2013-12-23 16:47:31 -06:00
Gregory Nutt
45d2bf2554 Support for Sharp Memory LCD. From Librae 2013-12-23 16:03:54 -06:00
Gregory Nutt
49f73c04ae Fix a typo that was cloned to several SAMA5 and MTD files 2013-12-21 09:45:27 -06:00
Gregory Nutt
124bd68c6f Finish A10 Timer register definitions 2013-12-13 11:44:52 -06:00
Gregory Nutt
f97be5131c Various fixes to the recent, big procfs checkin 2013-12-12 11:08:20 -06:00
Gregory Nutt
e4471dc8e0 procfs/: Extenstive architectural changes and enhancements by Ken Pettit 2013-12-12 09:21:55 -06:00
Gregory Nutt
62bf4d158d Move ramdisk.h to include/nutt/fs/ramdisk.h 2013-12-10 09:42:58 -06:00
Gregory Nutt
f821e74ebb Move smart.h to include/nuttx/fs/smart.h 2013-12-10 09:38:48 -06:00
Gregory Nutt
e282aad903 Move include/nuttx/fb.h to include/nuttx/video/fb.h 2013-12-10 09:23:54 -06:00
Gregory Nutt
bdfb2f7eb6 More OV2640 initialization logic 2013-12-10 09:10:39 -06:00
Gregory Nutt
4d07c15932 Add OV2640 camera support to test the SAMA5 ISI peripheral 2013-12-09 10:51:22 -06:00
Gregory Nutt
ed9756c137 MTD NAND: Check if block number is out of ragne at top of loop, not bottom, to avoid some bogus transfers 2013-12-05 18:19:48 -06:00
Gregory Nutt
692b087d07 LM: Don't initialize .data if running in SRAM. Global missing intialize type. SAMA5 NAND: Fix for read nand in smaller chunks 2013-12-05 10:37:55 -06:00