sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
27,504 Commits 1 Branch 0 Tags 291 MiB
5316652301
Commit Graph

2085 Commits

Author SHA1 Message Date
Gregory Nutt
3b825b3e00 Improve a debug assertion 2016-07-05 09:50:54 -06:00
Gregory Nutt
5b6fafb3f5 Several MTD FLASH drivers nullify the freed 'priv' structure and failed to return NULL as stated in the comments. Result, will operate on a NULL pointer later. Noted by David Sidrane. 2016-06-30 17:49:53 -06:00
Gregory Nutt
a897fd4ccf Eliminate use of apps/system/usbmonitor. Use drivers/usbmonitor instead. 2016-06-30 13:09:22 -06:00
Gregory Nutt
7c34a77b54 Move apps/system/usbmonitor to nuttx/drivers/usbmonitor 2016-06-30 12:24:33 -06:00
Gregory Nutt
cbb36416ab Need to use back- not forward-slash in character constant 2016-06-27 09:52:50 -06:00
Michael Spahlinger
3d5e690977 Shadow-Mode: The output- and configuration registers of the IO-Expander 
are held in the microcontrollers memory and only written to the IO-Expander.
 This reduces bus traffic and is more error-proof than the normal read-
 modify-write operation.

 Retry Mode: If enabled and an error occurs while writing to the IO-Expander the
 current transmission is automatically repeated once.
 2016-06-27 08:11:54 -06:00
Gregory Nutt
b16fdaf155 Some small improvements to GPIO driver 2016-06-26 11:24:35 -06:00
Gregory Nutt
db50f13511 Correct some typos in DEBUGASSERT statements 2016-06-24 14:34:21 -06:00
Gregory Nutt
20708c7c5e GPIO driver: Fix inconsistency in naming; beef up a debug assertion. 2016-06-24 11:32:24 -06:00
Gregory Nutt
ae19ca45e0 drivrs/ioexpander: Add support for a very simple GPIO drivers. It supports only pre-conrigured input and output pins and only basic input and output operations. 2016-06-24 09:43:49 -06:00
Wolfgang Reissnegger
d27ebee070 [sam34][timer] Fix ops check in TCIOC_STOP. 2016-06-23 17:12:24 -07:00
Gregory Nutt
acf3b14fe2 Trivial typo fix in README and document 2016-06-22 16:17:57 -06:00
Gregory Nutt
31b8e52267 Update README and documentatino 2016-06-22 14:47:40 -06:00
Gregory Nutt
0cb137d021 SYSLOG device flush logic not meaningful if SYSLOG file channels not supported 2016-06-22 13:35:53 -06:00
Gregory Nutt
1774ff2ed9 Add SYSLOG documentation to the porting guide 2016-06-22 12:26:54 -06:00
Gregory Nutt
b3acebd292 Update/replace drivers/syslog/README.txt 2016-06-22 10:47:27 -06:00
Gregory Nutt
9c87749afc SYSLOG device channel: Pre-pending CR to LF is now a configuration option 2016-06-22 10:08:20 -06:00
Gregory Nutt
91b82dcae3 SYSLOG character device channel will now expand LF to CR-LF 2016-06-22 08:36:50 -06:00
Gregory Nutt
82c890db23 syslog_dev_flush() needs to check if the inode is a mountpoint before calling the flush() method. Noted by David Sidrane. 2016-06-22 05:58:33 -06:00
Gregory Nutt
35cb2fb87d Eliminate a warning 2016-06-21 16:59:46 -06:00
Gregory Nutt
cb55c06153 sched_file_channel(): Comments say that we need to lock the scheduler, but we do not. 2016-06-21 16:39:28 -06:00
Gregory Nutt
8a9bd9af9d SYSLOG: Some rather complex conditional compilation missed a case. 2016-06-21 15:08:09 -06:00
Gregory Nutt
0e1e3bc404 Add a file that I forgot in the last commit; Also update some comments. 2016-06-21 13:33:17 -06:00
Gregory Nutt
e6a1d53869 Extend SYSLOG logic so that we can send SYSLOG output to a file. Not verified on initial commit. 2016-06-21 12:54:47 -06:00
Paul A. Patience
2f76f6e848 can: Add support for poll 2016-06-21 13:02:46 -04:00
David Sidrane
205a4b8498 Missing EXTERN on global variable declaration 2016-06-21 10:09:09 -06:00
Gregory Nutt
8f0c2cdd13 SYSLOG: Change configuration selections to assure that one and only one SYSLOG device can be selected. Also add a check to assure that it is appropriate to use up_putc as the low-level syslog device. Adds CONFIG_SYSLOG_CONSOLE and CONFIG_SYSLOG_SERIAL_CONSOLE. 2016-06-21 09:59:09 -06:00
Gregory Nutt
5118264e6c Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG 2016-06-21 09:35:51 -06:00
Gregory Nutt
485aa6b231 SIM: Comment out skip scheduler debug output that can hang the simulation. 2016-06-21 08:59:01 -06:00
Gregory Nutt
c5ac473bc0 SYSLOG: Remove an obsolete, unused configuration item from Kconfig file 2016-06-21 07:58:42 -06:00
Gregory Nutt
62d8f839c7 SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup 2016-06-21 07:52:24 -06:00
Gregory Nutt
5385266756 SYSLOG: Fix a compile problem with assertions enabled. 2016-06-21 07:24:14 -06:00
Sebastien Lorquet
9a22ed1095 Trivial but required change to build SPI EEPPROM driver. 2016-06-21 06:29:26 -06:00
Gregory Nutt
29a99bef0f serial/Kconfig: Oops put SERIAL_CONSOLE definition within if-endif condition. Better outside 2016-06-20 17:49:16 -06:00
Gregory Nutt
cf1375daf7 Break syslog_channel.c up into syslog_channel.c, syslog_putc.c, syslog_force.c and syslog_flush.c to limited what is brought into the link. Separate syslog_emergstream.c from syslog_stream.c. Didn't help in the case I was looking at. 2016-06-20 17:10:52 -06:00
Gregory Nutt
505ca542e8 Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly 2016-06-20 16:11:50 -06:00
Gregory Nutt
2a751068e6 Without lowsyslog() *llerr() is not useful. Eliminate and replace with *err(). 2016-06-20 12:44:38 -06:00
Gregory Nutt
43eb04bb8f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:59:15 -06:00
Gregory Nutt
d40a473f72 Without lowsyslog() *llwarn() is not useful. Eliminate and replace with *warn(). 2016-06-20 09:37:08 -06:00
Gregory Nutt
2b445ddccc Remove lowsyslog(). The new syslog() includes all of the functionality of lowsyslog(). No longer any need for two interfaces. 2016-06-20 08:57:08 -06:00
Gregory Nutt
5002e27e84 Since syslog_add_intbuffer can now be called from the IDLE thread, it must use a critical section. Also fix an error in circular buffer index handling. 2016-06-20 07:50:07 -06:00
Gregory Nutt
f4c47636e7 SYSLOG: Debug output from the IDLE task should be forced like interrupt level output 2016-06-20 07:35:38 -06:00
Gregory Nutt
fa365e85f5 Update some cmoments 2016-06-20 06:11:22 -06:00
Stefan Kolb
a68232863e Fix missing implementation of static function 2016-06-20 06:11:21 -06:00
Gregory Nutt
9a19d64610 Reanem syslogstream.c to syslog_steam.c for consistency 2016-06-19 18:19:34 -06:00
Gregory Nutt
7dd66a4620 Need to pass va_list as a reference to vsyslog. This is because va_list is a structure in some compilers and passing of structures in the NuttX sycalls does not work. 2016-06-19 14:50:00 -06:00
Gregory Nutt
690a0e7a6e Eliminate another warning 2016-06-19 13:58:39 -06:00
Gregory Nutt
b68822805f Eliminate a warning 2016-06-19 13:56:49 -06:00
Gregory Nutt
e480b385e6 SYSLOG: syslog_initialize.c appeared twice is list of sources 2016-06-19 13:55:23 -06:00
Gregory Nutt
5b2aa7bf99 Remove all traces of CONFIG_SYSLOG 2016-06-19 13:59:43 -06:00
Gregory Nutt
9434d3e945 There is now one-and-only-one copy of syslog_putc. It is in the SYSLOG channel logic and can redirect syslog output as needed. All former syslog_putc versions were renamed and the corresponding SYSLOG device initializaiton now calls syslog_channel() 2016-06-19 13:03:20 -06:00
Gregory Nutt
d82942cf3b Merge remote-tracking branch 'origin/master' into syslog 2016-06-19 11:20:31 -06:00
Gregory Nutt
9f260ca193 Some renaming so that future features will fit in better; If the architecture provides its only system logging (via CONFIG_ARCH_SYSLOG), then syslog_initialize() is stubbed out 2016-06-19 11:16:12 -06:00
Gregory Nutt
19c6a82f8b a few cosmetic changes 2016-06-19 09:52:34 -06:00
Gregory Nutt
a43cdbff0b Add missing file header 2016-06-19 09:48:42 -06:00
Gregory Nutt
f59196247c Merge remote-tracking branch 'origin/master' into syslog 2016-06-19 09:47:13 -06:00
Gregory Nutt
99ad3e9bcf Need to capture return value from ramlog_syslog_initialize() 2016-06-19 09:41:35 -06:00
Gregory Nutt
0f18f3bd15 Move RAMLOG initialize from up_initialilize.c files to syslog_initialize(). up_initialize.c files now call syslog_initialize() unconditionally 2016-06-19 09:39:21 -06:00
Gregory Nutt
de58cb6027 Some higher level SYSLOG features are disabled if the architecture-specific logic provides its own SYSLOG functionality 2016-06-19 09:21:52 -06:00
Gregory Nutt
3bd953316f Add a hook before the existing syslog_initialize() call; rename the old syslog_initialize() to syslog_dev_initialize(). 2016-06-19 09:12:33 -06:00
Gregory Nutt
12150bc6c1 Merge remote-tracking branch 'origin/master' into syslog 2016-06-19 08:48:10 -06:00
Gregory Nutt
e27491f5be Move fs/drivers/fs_devsyslog.c to drivers/syslog/syslog_device.c 2016-06-19 08:46:46 -06:00
Gregory Nutt
668980b4fa Merge remote-tracking branch 'origin/master' into syslog 2016-06-19 08:02:42 -06:00
Gregory Nutt
34f776dce9 Move the OS intensive part of vsyslog and vlowsyslog to drivers/syslog/vsyslog.c and vlowsyslog.c. Also move lib_syslogstrem to drivers/syslog/syslogstream.c 2016-06-19 07:56:24 -06:00
Gregory Nutt
fedf00033c Make default interupt buffer smaller 2016-06-19 07:03:10 -06:00
Gregory Nutt
ea9565e137 SYSLOG: Flesh out interrupt buffer logic 2016-06-18 14:54:25 -06:00
Gregory Nutt
c44a011394 Add some basic SYSLOG channel selection logic 2016-06-18 12:54:55 -06:00
Gregory Nutt
3fa41c0f18 Kconfig files: Fix some dependencies that have CONFIG_ in the variable name 2016-06-17 19:30:19 -06:00
Gregory Nutt
0c8c7fecf0 Add _ to the beginning of all debug macros to avoid name collisions 2016-06-16 12:33:32 -06:00
Gregory Nutt
b7f0fbc073 Centralize definitions associated with CONFIG_DEBUG_RTC 2016-06-16 07:39:23 -06:00
Gregory Nutt
37b9742189 Centralize definitions associated with CONFIG_DEBUG_TIMER 2016-06-16 07:16:25 -06:00
Gregory Nutt
6b517ed017 Centralize definitions associated with CONFIG_DEBUG_WATCHDOG 2016-06-16 06:28:04 -06:00
Gregory Nutt
03cbe671ad Centralize definitions associated with CONFIG_DEBUG_PWM 2016-06-15 17:23:56 -06:00
Gregory Nutt
8ce929a915 Centralize definitions associated with CONFIG_DEBUG_I2S 2016-06-15 16:54:01 -06:00
Gregory Nutt
5c89b18af8 Centralize definitions associated with CONFIG_DEBUG_I2C 2016-06-15 16:30:12 -06:00
Gregory Nutt
63b1eb09e6 Centralize definitions associated with CONFIG_DEBUG_CAN 2016-06-15 15:45:27 -06:00
Gregory Nutt
027490924e Cosmetic, fix alignment 2016-06-15 14:13:18 -06:00
Gregory Nutt
2ddd57c674 Centralize definitions associated with CONFIG_DEBUG_LEDS 2016-06-15 14:12:19 -06:00
Gregory Nutt
24c51ec1ff Centralize definitions associated with CONFIG_DEBUG_LCD 2016-06-15 11:40:33 -06:00
Gregory Nutt
ba03134bed Centralize definitions associated with CONFIG_DEBUG_SPI 2016-06-15 10:41:13 -06:00
Konstantin Berezenko
a13577c572 Minor fix to error messages: ncp5623c 2016-06-14 16:46:12 -07:00
Gregory Nutt
c442336bfe cosmetic changes from review of last PR 2016-06-14 16:36:39 -06:00
Gregory Nutt
00a67b5d2b Merged in K-man23/nuttx/ncp5623c (pull request #56) 
Add RGB driver NCP5623C
 2016-06-14 16:15:34 -06:00
Konstantin Berezenko
787af112a2 Add RGB driver NCP5623C 2016-06-14 15:09:30 -07:00
Gregory Nutt
a308ea553b Remove some excessive, redundant debug info per request of antin Berezenko. See Issue #8. 2016-06-14 15:50:23 -06:00
Frank Benkert
573b1d415c * SAMV7: SPI: SPI-Freq. 40MHz; VARSELECT; hw-features 
This change adds the following improvements:
  - Increase the allowed SPI-Frequency from 20 to 40 MHz.
  - Correct and rename the "VARSELECT" option This option was included in the code as "CONFIG_SPI_VARSELECT" but nowhere  defined in a Kconfig file. The patch renames it to "CONFIG_SAMV7_SPI_VARSELECT" and corrects the implementation according the datasheet of Atmel. In short, this option switches the processor from "fixed peripheral selection" (single device) to "variable peripheral selection" (multiple devices on the bus).
  - Add a new Function to the interface to control the timing and delays of the chip according the ChipSelect lines. This function can control the delay between the assertion of the ChipSelect and the first bit, between the last bit and the de-assertion of the ChipSelect and between two ChipSelects. This is needed to tune the transfer according the specification of the connected devices.
  - Add three "hw-features" for the SAMV7, which controls the behavior of the ChipSelect:
    1. force CS inactive after transfer: this forces a (short) de-assertion of the CS after a transfer, even if more data is
      available in time
    2. force CS active after transfer: this forces the CS to stay active after a transfer, even if the chip runs out of data. Btw.: this is a prerequisit to make the LASTXFER bit working at all.
    - escape LASTXFER: this suppresses the LASTXFER bit at the end of the  next transfer. The "escape"-Flag is reset automatically.
 2016-06-14 13:12:16 -06:00
Gregory Nutt
0f249016a0 Eliminate some warnings 2016-06-13 14:01:32 -06:00
Gregory Nutt
eac916c907 Fix some warnings 2016-06-13 11:48:20 -06:00
Gregory Nutt
0665c7e06c drivers/: Change some nerr() ERRORS to ninfo() and nwarn() WARNINGS. 2016-06-12 09:26:12 -06:00
Gregory Nutt
efb02f2ef1 drivers/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network evernts are not errors. 2016-06-12 08:31:22 -06:00
Gregory Nutt
7d0950bb22 net/: Change some nerr() ERRORS to nwarn() WARNINGS. Anomolous network events are not errors. 2016-06-12 07:09:37 -06:00
Gregory Nutt
e18e2b351b Need a info() macro mapping 2016-06-11 19:05:32 -06:00
Gregory Nutt
f12da847d8 drivers/wireless: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 19:03:57 -06:00
Gregory Nutt
27bc1a2221 drivers/sensors: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-11 18:21:49 -06:00
Gregory Nutt
a1469a3e95 Add CONFIG_DEBUG_ERROR. Change names of *dbg() * *err() 2016-06-11 15:50:49 -06:00
Gregory Nutt
e99301d7c2 Rename *lldbg to *llerr 2016-06-11 14:55:27 -06:00
Gregory Nutt
86b79b33cf Reserver the name 'err' for other purposes 2016-06-11 14:40:07 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
fc3540cffe Replace all occurrences of vdbg with vinfo 2016-06-11 11:59:51 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
9c4b604074 Button upper half driver: Add definitions needed for compilation with the poll() interface is not disabled. 2016-06-11 07:22:31 -06:00
Gregory Nutt
5f9bcfd5bf Trivial changes from review of last PR 2016-06-09 09:36:06 -06:00
Gregory Nutt
03c44c3583 Merged in marten_svanfeldt/nuttx-public/for_upstream/is25 (pull request #44) 
Added driver of IS25xP SPI flash devices
 2016-06-09 09:30:34 -06:00
Marten Svanfeldt
edeb2eed4e Added driver of IS25xP SPI flash devices 
Based on sst25xx driver

Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2016-06-09 05:13:06 +02:00
Gregory Nutt
d76d889efd Restore FLASH_ERASALL in configurations where it was previously selected 2016-06-03 09:10:21 -06:00
Pierre-noel Bouteville
7e2aed942a Correct conditioinal compilation in ST7565 driver 2016-06-03 08:42:32 -06:00
Gregory Nutt
a18dbfda6e Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call. 2016-06-02 10:44:13 -06:00
Gregory Nutt
44353f320c Replace confusing references to uIP with just 'the network' 2016-05-30 09:37:34 -06:00
Gregory Nutt
22044edd12 Merged in ziggurat29/nuttx/stm32l4_i2c_lcd_mjkdz_001 (pull request #35) 
correct bugs and add enhancements to pcf8574 lcd backpack driver
 2016-05-29 14:02:39 -06:00
ziggurat29
bb7a579681 fleshed out rest of fileops interface; read now takes into consideration current file position (so the display can be read in multiple operations, and indiate EOF correctly), seek (really just to facilitate rewind), and unlink (to facilitate dropping from system at runtime). 2016-05-29 14:53:37 -05:00
Manuel Stühn
5c6c7bd60d Fix recently introduced problem with build of ADC driver with analog debug enabled. 2016-05-29 13:45:40 -06:00
ziggurat29
4643fcdfd8 correct logic hazard in latch and load nybble; was transitioning control lines at the same time as enable, causing spurious behaviour on less-tolerant displays 
improve timing parameters in init sequences for better display compatibility

correct (row,col) -> address calculation; affects 4-line displays

update comments in header and readme
 2016-05-29 11:09:00 -05:00
Gregory Nutt
7d538d19bf Costmetic changes to comments and style 2016-05-27 10:53:27 -06:00
Pierre-noel Bouteville
41412d0ce9 * fix a bug in crc computation for ms583730 
* implement POSIX read.
 2016-05-27 07:05:20 -06:00
Gregory Nutt
3e7b2d617a All drivers that use SPI must call SPI_LOCK and SPI_UNLOCK. This is not optional. 2016-05-26 14:56:10 -06:00
Gregory Nutt
d5a4f85893 ADS1255 Driver: Must also lock the SPI bus before using it. 2016-05-26 14:00:33 -06:00
Gregory Nutt
d2caa93f1a ADS1255 Driver: Must not do SPI access from interrupt handler. Use the worker thread instead. 2016-05-26 13:44:11 -06:00
Gregory Nutt
1571575d54 Perhaps this is a little clearer 2016-05-26 13:44:10 -06:00
Gregory Nutt
5ea37bb139 Merged in paulpatience/nuttx/warnings (pull request #33) 
Silence some warnings
 2016-05-26 13:09:58 -06:00
Paul A. Patience
f8f7b7582c Silence some warnings 2016-05-26 14:06:13 -04:00
Gregory Nutt
9d6845b7ec Add ADC bind method to the EFM32 and LPC17xx ADC drivers 2016-05-26 11:57:18 -06:00
Gregory Nutt
b630d48175 Add bind method to the ADC lower-half interface 2016-05-26 11:32:26 -06:00
Gregory Nutt
e57a6d14c3 lcd/Kconfig, Make.defs: Remove dependency of CONFIG_LCD_NXDRIVER for building non-graphic, SLCD drivers. 2016-05-26 07:21:14 -06:00
Sebastien Lorquet
880b59aa26 Additional configuration option to enable SST26 driver debug output. Using comming FS debug output generates too much output. 2016-05-25 13:43:44 -06:00
Gregory Nutt
9ec104834a Remove CONFIG_USARTn_ISUART 2016-05-25 11:21:48 -06:00
Gregory Nutt
c089a2f241 Rename CONFIG_ARCH_HAVE_OTHER_UART to CONFIG_OTHER_UART_SERIALDRIVER 2016-05-25 10:48:33 -06:00
Gregory Nutt
e2e6ce3f1b Rename CONFIG_ARCH_HAVE_SCIn to CONFIG_SCIn_SERIALDRIVER 2016-05-25 10:46:55 -06:00
Gregory Nutt
2a87741e72 Rename CONFIG_ARCH_HAVE_UARTn to CONFIG_UARTn_SERIALDRIVER 2016-05-25 10:45:01 -06:00
Gregory Nutt
249a2e48e5 Rename CONFIG_ARCH_HAVE_USARTn to CONFIG_USARTn_SERIALDRIVER 2016-05-25 10:39:23 -06:00
Gregory Nutt
55faa87188 Should fix a warning about unmet dependencies in 'make menuconfig' 2016-05-25 10:17:42 -06:00
Gregory Nutt
d58e4acf17 Remove whitespace from the end of lines 2016-05-25 08:48:55 -06:00
Gregory Nutt
51504a032e Oops... forgot to add PCF8574 LCD Backpack files before doing the commit. 2016-05-25 08:48:54 -06:00
Dave
dc1c27cee7 * This driver supports the 'I2C lcd backpack' design that is based on the PCF8574 io expander. There's a myriad of different vendors of such, but they are principally the same, save wiring and minor features like jumpers for I2C addresses. This driver supports known and unknown variants. 
*  The interface board supports HD44780-based LCD modules up to 4x32, and this driver accommodates all those formats.
 2016-05-25 08:06:32 -06:00
Gregory Nutt
5356e3d747 Since I can't (yet) get rid of the sanity checks in config.h, I suppose I should at least update the checks. 2016-05-11 11:07:00 -06:00
Frank Benkert
9eeb8634fc Improve the CAN error reporting by also report internal device driver errors. 2016-05-11 07:10:17 -06:00
Gregory Nutt
e523c93391 Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' message weirdness. 2016-05-10 15:44:06 -06:00
Sebastien Lorquet
f4fa4799f7 Add a driver for SST26F spi/qspi flash devices (SPI mode only) 2016-05-10 11:09:15 -06:00
Gregory Nutt
050f544782 Fix typo in variable name in serial BREAK logic. Review other serial implementations for similar naming problems. 2016-05-05 11:30:47 -06:00
ziggurat29
d3fbd86657 bug in smart.c; return code of smart_scan not checked, can cause success result in failure case, leading to 'dev' pointer being invalid. 2016-04-27 19:33:45 -05:00
Sebastien Lorquet
9fd3db6293 PCA9555: Fix condition where GPIO interrupt is not re-enabled. 2016-04-20 09:59:16 -06:00
Gregory Nutt
e8f0965d35 Mostly cosmetic changes from review of last PR 2016-04-17 14:13:44 -06:00
ziggurat29
1b9d837df3 add MTD support for Micron N25Qxxx family of QSPI flash 2016-04-17 12:20:07 -05:00
Alan Carvalho de Assis
7f5339ee5a drivers/sensors/h1750fvi.c: Add a character driver for Rohm Ambient Light Sensor BH1750FVI. 2016-04-15 08:16:16 -06:00
Gregory Nutt
1f8212679c NRF24L01: Fix backward calculation of relative frequency. Noted by Henry Zhang 2016-04-15 07:07:22 -06:00
Gregory Nutt
84cd720479 FTL: Make it clear the the unlink method has not been implemented 2016-04-15 07:03:28 -06:00
Gregory Nutt
9008308b64 Remove some block comments before empty code sections 2016-04-11 18:16:04 -06:00
Gregory Nutt
8eb7898a91 RTC driver: A PID of zero should mean to notify the calling task 2016-04-10 09:12:50 -06:00
Gregory Nutt
3228d32938 Correct permmisions on executable scripts 2016-04-10 09:11:59 -06:00
Gregory Nutt
dc71a47df6 RTC: Fix some configuration issues when RTC_ALARM is disabled 2016-04-04 09:24:27 -06:00
Gregory Nutt
a44b0798e2 RTC driver: Needs to initialize state structure to zero on initalization 2016-04-03 12:40:25 -06:00
Gregory Nutt
ae95f6cdfd RTC: Fix some errors when RTC debug is enabled 2016-04-03 09:52:25 -06:00
Gregory Nutt
1135ce804d RTC: Extend interface by adding a method to set the alarm relative to the current time 2016-04-02 18:18:48 -06:00
Gregory Nutt
0723226bda RTC: Further simplications of the RTC driver interface; Add sample implem. 2016-04-02 13:55:58 -06:00
Gregory Nutt
58d6624f29 RTC: Simplify the RTC driver interface. Way too much stuff in that interface and it is not fully implemented anywhere. 2016-04-02 13:01:02 -06:00
Gregory Nutt
35ab1697cd CONFIG_DEV_RANDOM depends on CONFIG_ARCH_HAVE_RNG which is selected with MCU-specific RNG H/W is enabled. So correct default is y; you almost certainly want /dev/random as well. 2016-03-30 07:58:09 -06:00
Gregory Nutt
23142d91fa PM: Fix a compile error in a DEBUGASSERTion when DEBUG is enabled 2016-03-27 18:17:37 -06:00
Gregory Nutt
fbaee9db34 PM: Some cosmetic updates 2016-03-27 13:37:28 -06:00
Gregory Nutt
54dbec248e PM: Add domain to all PM interfaces. Internal PM data structures now handle multiple PM domains. 2016-03-27 13:03:47 -06:00
Gregory Nutt
dea4fe5d90 PM: Add activity domain to all PM callbacks 2016-03-27 11:19:39 -06:00
Gregory Nutt
970822b351 Add missing PM configuratin options to Kconfig file 2016-03-27 10:18:20 -06:00
Paul A. Patience
c62bb9beb1 Fix issues detected by cppcheck 2016-03-22 15:46:47 -04:00
Gregory Nutt
c49bd4179a Purely cosmetic 2016-03-20 18:44:44 -06:00
Andrew Tridgell
38eb8bb1b0 pipes: support FIONREAD and FIONWRITE ioctl on pipes; use semaphores for pipecommon_ioctl(). 2016-03-20 18:11:13 -06:00
Gregory Nutt
75a4a5dcbe Back part of a previous CDC/ACM change. Improve some Kconfig comments. 2016-03-19 12:45:33 -06:00
Gregory Nutt
deed28b8f2 USB composite: Fix some errors in conditional compilation 2016-03-19 08:08:40 -06:00
Gregory Nutt
9644d42e91 USB CDC/ACM device: Trivial configuration clean-up 2016-03-19 07:36:39 -06:00
David Sidrane
d2a017d9bb rdreqs was defined as CONFIG_CDCACM_NWRREQS size 2016-03-17 21:47:40 +00:00
David Sidrane
2cfa023039 RD - comments were for WR 2016-03-17 21:45:57 +00:00
Gregory Nutt
242f8ff25f drivers/syslog/note_driver.c: Add a driver that will allow an application to read buffered scheduler instrumentation data 2016-03-17 14:46:00 -06:00
Gregory Nutt
3ef25dc49d AT24xx: Add logic to unregister from the procfs file system if the driver is uninitialized 2016-03-17 09:55:10 -06:00
Max Neklyudov
1951b9df57 Improve m25px driver 2016-03-17 07:37:45 -06:00
Gregory Nutt
e879d0f423 Move scheduler instrumentation hooks out of sched.h (where they seem like application interfaces) and into nuttx/sched.h where it is clare that these are OS internal interfaces. 2016-03-16 11:00:31 -06:00
Frank Benkert
611fb04449 BlockToCharDev: increase sectorsize to 32 bit 2016-03-09 12:44:56 -06:00
Gregory Nutt
1c31e10397 NRF2410L: Add missing conditional logic in vtable initialization 2016-03-08 16:11:08 -06:00
Gregory Nutt
7fa0adff83 Fix a misplaced right bracket 2016-03-08 15:33:33 -06:00
Frank Benkert
4d9c41fd57 AT24XX: Correct address calculation in Multi-Block-Read 2016-03-08 15:31:23 -06:00
Gregory Nutt
0970d43ab8 Cosmetic changes to comments 2016-02-28 07:48:16 -06:00
Gregory Nutt
d777110cbe Eliminate a warning 2016-02-27 07:27:45 -06:00
Sebastien Lorquet
dc7adfa817 drivers/wireless/ieee802154/Kconfig 
drivers/wireless/ieee802154/Make.defs
    Changes to the build infrastructure to include the mrf24j40 driver

include/nuttx/spi/spi.h
    Define a IEEE SPI device

include/nuttx/wireless/ieee802154/ieee802154_radio.h
    This file defines the API of a IEEE 802.15.4 radio device, to be used by the future common MAC 802.15.4 layer

drivers/wireless/ieee802154/mrf24j40.c
drivers/wireless/ieee802154/mrf24j40.h
    The main MRF24J40 IEEE 802.15.4 radio driver

include/nuttx/wireless/ieee802154/mrf24j40.h
    This file allows instanciation of the MRF24j40 driver from board configurations
 2016-02-26 18:39:27 -06:00
Gregory Nutt
1ecb092e51 Add wireless/ieee802154 to the build 2016-02-26 17:27:58 -06:00
Gregory Nutt
cfe018e991 Rename CONFIG_WIRELESS to CONFIG_DRIVERS_WIRELESS 2016-02-26 16:50:26 -06:00
Gregory Nutt
309beae2cd Move drivers/ieee802154 to drivers/wireless/ieee802154; rename include/nuttx/net ieee802154 to 6lowpan.h 2016-02-26 15:03:16 -06:00
Gregory Nutt
6481aa8a3d Remove drivers/ieee802154/skeleton.c 2016-02-26 11:20:07 -06:00
Gregory Nutt
2f28ca86c2 Clean up some naming; rename net/ieee802154 to net/6lowpan 2016-02-26 10:08:36 -06:00
Gregory Nutt
9ff645a298 drivers/ieee802154: Add a skeleton IEEE802154 driver 2016-02-25 15:11:30 -06:00
Gregory Nutt
b6f5ffa9a8 CDC/AC: too man right parentheses if IFLOW_CONTROL enabled 2016-02-24 11:54:02 -06:00
Frank Benkert
35df528f69 PCA9555: Remove duplicate variable declaration 2016-02-23 07:33:52 -06:00
Alan Carvalho de Assis
ea15ead6cc RGB LED driver 2016-02-22 08:43:32 -06:00
Gregory Nutt
0fb035f76b Standardize some naming in code section comments 2016-02-21 18:09:04 -06:00
Gregory Nutt
2244ed46bc nuttx/drivers: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 07:32:58 -06:00
Gregory Nutt
bf8120d51d Fix some odd logic in CC3000 semaphore handling. Noted by Vladimir Komendantskiy 2016-02-10 09:50:28 -06:00
Gregory Nutt
216eea4543 Net: Fix some errors introduced into the ENC28J60 driver; fix type of wd_start arguments. 2016-02-04 08:55:10 -06:00
Gregory Nutt
cea3854dea PCA5555: Add logic to make the driver thread safe. Problem noted by Stefan Kolb. 2016-02-03 12:39:11 -06:00
Gregory Nutt
dea24c503a Networking: Remove the HSEC argument from devif_timer. 2016-02-03 12:12:41 -06:00
Gregory Nutt
ff1e057364 Missed one EMAC driver in the last commit 2016-02-03 10:55:51 -06:00
Gregory Nutt
42c365aab1 Duplicate Manuel's EMAC driver fix to every other driver that supports CONFIG_NET_NOINTS 2016-02-03 10:34:10 -06:00
Gregory Nutt
8fa9b99e7c I2C driver should support the RESET method as well 2016-02-03 07:32:25 -06:00
Gregory Nutt
be3e86ec89 Fix a typo in a DEBUGASSERT statement 2016-02-02 14:41:25 -06:00
Gregory Nutt
e5d86dd3fc Oops. Apparently a copy'n'paste was accidentally a cut'n'paste 2016-02-02 12:53:32 -06:00
Gregory Nutt
9ce58ad5b7 I2C: up_i2creset should not be a global function; Now it is an I2C interface method 2016-02-02 11:21:48 -06:00
Gregory Nutt
4a34a199dd I2C: Add an I2C character driver 2016-02-02 08:30:54 -06:00
Gregory Nutt
009e9f76cb I2C: Fixes/improvements from last massive I2C commits 2016-02-02 07:13:03 -06:00
Gregory Nutt
456b5f06dc Clean up some comments 2016-02-01 19:52:16 -06:00
Gregory Nutt
4cfbe50c0d I2C: Fix some compile time issues found with tools/testbuild.sh 2016-02-01 18:02:56 -06:00
Gregory Nutt
69ce24c70c I2C: Remove the setfrequency method from the interface 2016-02-01 16:31:13 -06:00
Gregory Nutt
6ad641888b Add I2C frequency to the i2c_msg_s structure 2016-02-01 14:17:20 -06:00
Gregory Nutt
f9053182d3 I2C: Remove setaddress method 2016-02-01 12:14:31 -06:00
Gregory Nutt
8c9bddf998 I2C: Eliminate the I2C_WRITE and I2C_READ macros 2016-02-01 08:57:22 -06:00
Gregory Nutt
10000841a8 The I2C_TRANSFER method is no longer optional 2016-01-31 14:16:05 -06:00
Gregory Nutt
3a781a2d3f Remove I2C slave methods from I2C master interface; rename i2c_dev_s to i2c_master_s. 2016-01-30 08:36:47 -06:00
Gregory Nutt
ceb415204e Move include/nuttx/i2c.h to include/nuttx/i2c/i2c_master.h 2016-01-30 08:00:16 -06:00
Vladimir Komendantskiy
19feab1bd6 drivers/modem/u-blox.c and include/nuttx/drivers/u-blox.h: Add an upper half driver for the U-Blox Modem. From Vladimir Komendantskiy 2016-01-30 07:37:43 -06:00
Gregory Nutt
ca792558bf Update ChangeLog; add ADS1242 driver to build system; fix some typos; eliminate some warning 2016-01-29 07:55:39 -06:00
Entinger Alexander
dc8c14aa53 Driver for the 24-Bit Differential Input ADC ADS1242 that communicates via SPI with a MCU. Reading the ADC conversion result as well as configuring the ADC, setting the input channel, etc. is implemented via ioctl calls. However, it does not yet implement the standard ADC interface. 2016-01-29 07:41:23 -06:00
Gregory Nutt
fd896330d8 Remove the final vestiges of up_spiinitialize() 2016-01-27 09:27:56 -06:00
Gregory Nutt
efb5674742 drivers/ioexpander/pca9555: Now uses i2c_read and i2c_write instead of I2C_READ and I2C_WERITE 2016-01-26 11:07:47 -06:00
Gregory Nutt
b6b3c2be3e Add I2C_TRANSFER based wrappers for I2C_TRANSFER as well 2016-01-26 10:57:51 -06:00
Gregory Nutt
d4a53ee131 I2C: Eliminate the I2C_WRITEREAD method 2016-01-26 10:26:16 -06:00
Gregory Nutt
67f38169b2 drivers/i2c: Move wrapper that implements I2C_WRITEREAD using I2C_transfer from pc9555.c to a new, comon i2c directory 2016-01-26 09:58:18 -06:00
Gregory Nutt
f74fbecf52 PCA9555 I/O expander: Fix an error in addressing noted by Stefan Kolb; convert to use I2C_TRANSFER instead of I2C_WRITEREAD which is not thread safe 2016-01-26 07:59:36 -06:00
xuhang
26d40fa80c drivers/usbhost/hid_parser.c: Wrong size used in memcpy() 2016-01-25 20:00:11 -06:00
Gregory Nutt
b6e128a4ce Merge branch 'master' of bitbucket.org:patacongo/nuttx 2016-01-24 09:15:29 -06:00
Gregory Nutt
564a1ce606 Cosmetic clean-up of comments 2016-01-24 08:21:55 -06:00
Gregory Nutt
31cf7e0900 Fix missing semicolon 2016-01-23 21:21:15 -06:00
Gregory Nutt
d87f7e99d2 NOkia LCD needs to initialize SPI before using it 2016-01-23 19:45:30 -06:00
Gregory Nutt
7ee6c5bcfc Minor clean-up for last big commit 2016-01-23 19:18:55 -06:00
Gregory Nutt
7edf921c5e Remove CONFIG_SPI_OWNBUS: Now it is not just a good idea, it is the law 2016-01-23 18:54:36 -06:00
Gregory Nutt
f6e49caba8 All SPI-based device drivers needs to call SPI_HWFEATURES() with zero in order to co-exist with drivers that use H/W features 2016-01-23 16:18:13 -06:00
Gregory Nutt
accd99db25 Add an optional hwfeatures method to the SPI interface 2016-01-23 15:12:45 -06:00
Stefan Kolb
2b05f3e830 I/O Expander: Fix some bad macros, make naming consisted 2016-01-22 07:08:59 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
3986f6cdee Part of last change was still in the editor 2016-01-20 13:09:03 -06:00
Frank Benkert
da33ec6b2e CAN: Add more extensive error reporting information 2016-01-18 12:22:27 -06:00
Gregory Nutt
b54cf004f3 Update ChangeLog 2016-01-17 15:15:01 -06:00
Gregory Nutt
9844036a74 Merged in paulpatience/nuttx/lsm9ds1 (pull request #48) 
Add LSM9DS1 accelerometer, gyroscope and magnetometer
 2016-01-17 15:06:37 -06:00
Paul A. Patience
57b8a9526d Add LSM9DS1 accelerometer, gyroscope and magnetometer 2016-01-17 16:01:14 -05:00
Gregory Nutt
63301fe213 Cosmetic changes from review of last pull request 2016-01-17 14:52:11 -06:00
Janne Rosberg
fb1bf10a3d add pn532 support 
Signed-off-by: Janne Rosberg <janne.rosberg@offcode.fi>
 2016-01-17 22:17:49 +02:00
Gregory Nutt
c6d967e632 OVR2640: Reverse frequency/address 2016-01-16 09:05:39 -06:00
Alexander Entinger
75d6c4cee3 drivers/sensors/mcp9844: Driver for the MCP9844 I2C digital temperature sensor with a selectable resolution 2016-01-15 07:25:58 -06:00
Gregory Nutt
51ee01255b ENC28J60: Missing semicolon causes error in some configurations. Noted by Maciej Wójcik 2016-01-09 19:56:47 -06:00
Gregory Nutt
ce2a0b6b51 Eliminate a warning 2016-01-06 10:05:39 -06:00
Vladimir Komendantskiy
ae71c9b447 Fix a compile time error in drivers/net/tun.c. 2016-01-05 10:58:58 -06:00
Gregory Nutt
426eb61e47 Fix an error introduced in the last big set of header file renaming 2015-12-29 18:29:24 -06:00
Gregory Nutt
695a8890a6 Rename pm_internal.h to pm.h 2015-12-29 18:19:03 -06:00
Gregory Nutt
b682190f52 Rename all head files in main NuttX repository with names like *internal.h, removing the internal 2015-12-29 17:31:17 -06:00
Gregory Nutt
a2e1ece873 RTC: Handle RTC failures. If mktime is called with garbage, it may crash 2015-12-21 14:39:40 -06:00
Gregory Nutt
a696b807fb PCF65263: Correct readback verification of seconds register 2015-12-21 14:00:25 -06:00
Gregory Nutt
b1a0171d0f Fix a missed name change in a Kconfig file 2015-12-15 08:43:18 -06:00
Gregory Nutt
8ab93fdf98 Change name of drivers/discrete back to drivers/ioexpander 2015-12-15 08:40:34 -06:00