Some USB controllers can receive or send multiple data packets then
generate one interrupt. This mechanism can reduce the number of data
copies. Extend req buf to accommodate this.
Signed-off-by: yangsong8 <yangsong8@xiaomi.com>
purpose:
To improve the real-time performance of the system, we prefer to perform
as few operations as possible within the interrupt function.
We have designed an interrupt thread for each interrupt,
where all the operations that are not necessary to be handled
in the interrupt function are delegated to be processed by the interrupt thread.
Up_enable_irq will be invoked after isrthread started.
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Add TUNSETCARRIER ioctl, then we may change the carrier state of TUN dynamically. Note that we don't need an ioctl for getting carrier, it can be done by SIOCGIFFLAGS already.
Ref: https://github.com/torvalds/linux/blob/v6.10/drivers/net/tun.c#L3374-L3380
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
CC: serial/serial_io.c "/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/nuttx/power/regulator.h", line 227: warning #231-D:
declaration is not visible outside of function
int regulator_gpio_init(FAR struct ioexpander_dev_s *iodev,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
^
"/mnt/yang/qixinwei_vela_warnings_04_23/nuttx/include/sys/types.h", line 319: warning #228-D:
trailing comma is nonstandard
OK = 0,
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
This is a memory monitoring interface implemented with reference to Linux's PSI (Pressure Stall Information),
which can send notifications when the system's remaining memory is below the threshold.
The following example code sets two different thresholds.
When the system memory is below 10MB, a notification is triggered.
When the system memory is below 20 MB, a notification (POLLPRI event) is triggered every 1s.
```
int main(int argc, FAR char *argv[])
{
struct pollfd fds[2];
int ret;
if (argc == 2)
{
char *ptr = malloc(1024*1024*atoi(argv[1]));
printf("Allocating %d MB\n", atoi(argv[1]));
ptr[0] = 0;
return 0;
}
fds[0].fd = open("/proc/pressure/memory", O_RDWR);
fds[1].fd = open("/proc/pressure/memory", O_RDWR);
fds[0].events = POLLPRI;
fds[1].events = POLLPRI;
dprintf(fds[0].fd, "%llu -1", 1024LLU*1024 * 10);
dprintf(fds[1].fd, "%llu 1000000", 1024LLU*1024 * 20);
while (1)
{
ret = poll(fds, 2, -1);
if (ret > 0)
{
printf("Memory pressure: POLLPRI, %d\n", ret);
}
}
return 0;
}
```
https://docs.kernel.org/accounting/psi.html
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
"/home/guoshichao/work_profile/vela_os/vela_car_4/nuttx/include/nuttx/net/netdev.h", line 493: warning #231-D:
declaration is not visible outside of function
FAR struct netdev_ifaddr6_s *addr,
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
1.Add sign to indicate negative and positive
2.Fix case where there are negative numbers in the operation
3.expand to 512 bytes to support rsa2048
Signed-off-by: makejian <makejian@xiaomi.com>
(1) RSA_PKCS15_VERIFY Misspell
(2) if iv not provided during decryption, iv should get from data.
It was not discovered before because all symmetric decryption comes with iv.
Signed-off-by: makejian <makejian@xiaomi.com>
Some macro definitions have already been defined in other header files, redundant macro definitions have been removed in include/nuttx/can.h. Align some code. Remove no use struct (can_response_s) and some variables.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Events groups are synchronization primitives that allow tasks to wait
for multiple conditions to be met before proceeding. They are particularly
useful in scenarios where a task needs to wait for several events to occur
simultaneously.
Signed-off-by: chao an <anchao@lixiang.com>
./build.sh sim:usbdev -j12
sudo gdb nuttx/nuttx -ex "source nuttx/tools/gdb/__init__.py"
below command to create mbim NIC on host
nsh> conn 3
NuttX's MBIM device implementation adds an additional MBIM network
card to the NuttX system, which can debug the data communication with
the host, but this network card is unnecessary and needs to be removed
when the business actually uses this driver, And the cdcncm_receive
method needs to be re-implemented.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Summary:
Indicate whether the file is currently locked by adding a new field locked to filep.
0 - Unlocked
1 - Locked
The status of the filep at close is used to determine whether to continue with the following procedure.
Optimizing performance:
Before
Time taken to close the file: 33984 nsec
After
Time taken to close the file: 23744 nsec
Improvement of about 10 msec
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
Because stdio.h references stdatomic.h in MVSC, it internally declares mbstate_t, leading to redeclarations during compilation.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
This change mainly appears in the compilation environment of MVSC
Since MVSC supports the c++11 standard in VS2019 preview3 (https://en.cppreference.com/w/cpp/compiler_support/11), we can do static initialization using the c++11 approach
atomic_int a = 1
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. use nuttx/atomic.h instead of stdatomic
2. remove CONFIG_HAVE_ATOMIC,because we now support atomic on all platforms
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1.Modify the conditions for entering different include header files
2.Added pre-definition for _Atomic _Bool when it is missing
3.Added nuttx for stdatomic implementation. When toolchain does not support atomic, use lib/stdatomic to implement it
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
1. Add nuttx/atomic.h in include
2. Use nuttx/atomic.h instead of stdatomic.h in the nuttx directory
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
remove alist, switch to a convenient way to traverse
the physical address directly.
At the same time, we can use `gurad` to mark whether
it is free or alloc or out of bounds check
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
pm process should be done by chip specific, but we can provide a standard
flow, then vendor & chip can only focus on handle different state change.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
when the vsync comes, fb drivers should call fb_vsync_pollnotify to notify POLLPRI, so that users can catch the synchronization time of vsync and do something.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
Summary:
1.Remove the macro definition of getnproc in sysinfo
2.New get_nprocs_conf and get_nprocs interfaces, return CONFIG_SMP_NCPUS, return 1 when not defined
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
optimize the interaction flow associated with network drivers to reduce
the amount of code and improve compatibility
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This is a tool for associating discrete IDs with addresses.
This tool is implemented through the red-black tree method provided by <sys/tree.h>, and the time complexity when calling, searching, and deleting is optimized to O(logn)
The implementation is the moving node operation of two red-black trees
1. When applying for a node, it will first check whether there is an available node in the "removed" tree. If so, the memory address of the node will be reused and moved to the "alloced" tree.
2. If the "removed" tree is an "empty tree", then the node will be requested from the memory and added to the "alloced" tree
3. Similarly, when removing a node, we set the address pointed to in the node to "NULL" and move it to the "removed" tree. Next time we alloc the node, we can reduce the overhead caused by memory application
For now, we still have something that can be optimized, and that is the memory elimination mechanism of the "removed tree". The current implementation will only release all the content under the "removed" tree when the idtree is destroyed.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
According to the eMMC specification, in Backwards Compatibility
with legacy MMC card mode, the frequency of the SD clock must be
0-26 MHZ; in high speed SDR mode, it must be 0-52MHZ. So we should
switch to high speed SDR mode if the clock frequency is higher than
26MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
solve the compiling problem of the third-party library,
add IN6_IS_ADDR_MC_LINKLOCAL and IN6_IS_ADDR_SITELOCAL definitions.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
"libcxxmini/libxx_cxa_guard.cxx", line 47: error #77-D: this declaration has
no storage class or type specifier
__extension__ typedef int __guard __attribute__((mode(__DI__)));
^
"libcxxmini/libxx_cxa_guard.cxx", line 47: error #65: expected a ";"
__extension__ typedef int __guard __attribute__((mode(__DI__)));
^
"libcxxmini/libxx_cxa_guard.cxx", line 64: error #20: identifier "__guard" is
undefined
int __cxa_guard_acquire(FAR __guard *g)
^
"libcxxmini/libxx_cxa_guard.cxx", line 64: error #20: identifier "g" is
undefined
int __cxa_guard_acquire(FAR __guard *g)
^
"libcxxmini/libxx_cxa_guard.cxx", line 65: error #65: expected a ";"
{
^
"libcxxmini/libxx_cxa_guard.cxx", line 93: warning #12-D: parsing restarts
here after previous syntax error
}
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
CC: src/algslib_sha256.c "comlin.c", line 189: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame lin_err_frame = comlin_rx_frame[chlId];
^
"comlin.c", line 282: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame frame;
^
"comlin.c", line 321: error #1982-D: target stack alignment is insufficient to
guarantee alignment of this variable
struct can_frame frame;
"DiagServer_IsoTp.c", line 220: error #1982-D: target stack alignment is
insufficient to guarantee alignment of this variable
struct canfd_frame frame = {0};
^
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
the mempool_alloc and mempool_free function are duplicate with the
mempool method that provided in optee_os, in order to port optee_os, so
we rename the mempool related functions in nuttx
Signed-off-by: guoshichao <guoshichao@xiaomi.com>
In order to better use the Android goldfish emulator,
a GPU FB driver has been added. This allows the goldfish
emulator side to achieve more flexible display effects,
such as UI skins.
Signed-off-by: rongyichang <rongyichang@xiaomi.com>
According to Virtual I/O Spec:
When using legacy interfaces, transitional drivers which have not negotiated VIRTIO_F_ANY_LAYOUT MUST use a single descriptor for the struct virtio_net_hdr on both transmit and receive, with the network data in the following descriptors.
https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-2280006 (Section 5.1.6.6)
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
stdint.h is needed in uart_16550.h for some types, e.g. uint32_t,
uintptr_t. Otherwise there will be building issue unless that stdint.h
is added before uart_16550.h by all files which needs uart_16550.h.
Signed-off-by: Jinliang Li <lijinliang1@lixiang.com>
warning C5101: use of preprocessor directive in function-like macro argument list is undefined behavior
Co-authored-by: chenxiaoyi <chenxiaoyi@xiaomi.com>
Co-authored-by: xuxin19 <xuxin19@xiaomi.com>
Refactoring path logic to prevent logic flaws, direntry size bug fix to allow proper direntry traversal, open free bug fix to prevent memory leak after close.
Signed-off-by: Saurav Pal <resyfer.dev@gmail.com>
This adds explicit `void mm_free_delaylist(heap)` interface so that
to force freeing the heap's delaylist.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
when the thread to backtrace is exiting, get_tcb and up_backtrace in
different critical section may cause try to dump invalid pointer, have
to ensure the nxsched_get_tcb and up_backtrace inside same critical
section procedure.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
This driver implements `read`, `write`, `open`, `close` and `ioctl`
interfaces to the SHT4X temperature and humidity sensor on an I2C bus.
The read implementation is that of a character driver for easy
debugging, while `ioctl` provides an interface to the sensor's raw data
collection and heating functionality.
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h: In function 'bool spin_trylock_wo_note(volatile spinlock_t*)':
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:401:22: error: 'atomic_ushort' was not declared in this scope; did you mean 'std::__1::atomic_ushort'?
401 | atomic_load((FAR atomic_ushort *)&lock->tickets.next);
| ^~~~~~~~~~~~~
| std::__1::atomic_ushort
/home/hujun5/downloads1/vela_sim/nuttx/include/libcxx/__atomic/aliases.h:33:7: note: 'std::__1::atomic_ushort' declared here
33 | using atomic_ushort = atomic<unsigned short>;
| ^~~~~~~~~~~~~
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:401:37: error: expected primary-expression before ')' token
401 | atomic_load((FAR atomic_ushort *)&lock->tickets.next);
| ^
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:410:14: error: expected unqualified-id before 'new'
410 | spinlock_t new =
| ^~~
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:417:44: error: 'atomic_uint' was not declared in this scope; did you mean 'std::__1::atomic_uint'?
417 | if (!atomic_compare_exchange_strong((FAR atomic_uint *)&lock->value,
| ^~~~~~~~~~~
| std::__1::atomic_uint
/home/hujun5/downloads1/vela_sim/nuttx/include/libcxx/__atomic/aliases.h:35:7: note: 'std::__1::atomic_uint' declared here
35 | using atomic_uint = atomic<unsigned int>;
| ^~~~~~~~~~~
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:417:57: error: expected primary-expression before ')' token
417 | if (!atomic_compare_exchange_strong((FAR atomic_uint *)&lock->value,
| ^
/home/hujun5/downloads1/vela_sim/nuttx/include/nuttx/spinlock.h:418:54: error: expected type-specifier before '.' token
418 | &old.value, new.value))
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Original documentation link for riscv is broken,
so update to the correct link for all architectures.
Put the link around `reg_off` to avoid the long line warning
from nxstyle.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
- use 'lan9250_ioctl' to set and get the value of lan9250 phy register
- use `lan9250_uninitialize` to un-initialize the ethernet driver
Signed-off-by: chenwen@espressif.com <chenwen@espressif.com>
This definition was added in order to solve some compilation problems
encountered when porting tripartite libraries
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This definition was added in order to solve some compilation problems
encountered when porting third-party libraries
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
To solve some compilation issues encountered during the porting of
third-party libraries, this function has been added.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This adds field type to canioc_bittiming_s structure that allows
to set/obtain bit timing for both CAN CC and CAN FD.
CANIOC_GET_BITTIMING is now bidirectional: user specifies type field
and gets other fields from the controller.
The commit also updates current CAN FD capable controllers using the
ioctl. The type is not checked for classical CAN only controllers
and nominal bit timing is returned regardless of type value.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This commit moves can_bytes2dlc and can_dlc2bytes from kernel internal
functions to API. These functions are necessary to convert bytes to
dlc for CAN FD frames and has to be accessible from the application
since can_hdr_s does not store message length in bytes but directly in
dlc.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Add a common method to format backtrace to buffer, so it can be used by both mm, fs and other possoble modules.
Signed-off-by: fangpeina <fangpeina@xiaomi.com>
Allow CPU_XXX macros to be used without CONFIG_SMP=y
Signed-off-by: yanghuatao <yanghuatao@xiaomi.com>
Co-authored-by: Bowen Wang <wangbowen6@xiaomi.com>
Thread args have already been saved to stack after the TLS section by
nxtask_setup_stackargs. This is to retrieve it for use.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
make possible enable pool, but disabled in system heap.
also compatible for further extra heap use/not use pool.
Now use MM_HEAP_MEMPOOL_THRESHOLD -1 to indicate pool disabled.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
we can use g_cpu_lockset to determine whether we are currently in the scheduling lock,
and all accesses and modifications to g_cpu_lockset, g_cpu_irqlock, g_cpu_irqset
are in the critical section, so we can directly operate on it.
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
If the CAN stack receiving packets fast, but the application layer reading packets slow. Then `conn->readahead` will continue to grow, leading to memory leaks. Finally CAN stack potentially starve out all IOB buffers. To prevent memory leaks, users can restrict can socket buffer length.
Signed-off-by: gaohedong <gaohedong@xiaomi.com>
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h: In function 'oneshot_max_delay':
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h:272:3: error: implicit declaration of function 'timespec_from_tick' [-Wimplicit-function-declaration]
272 | timespec_from_tick(ts, tick);
| ^~~~~~~~~~~~~~~~~~
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h: In function 'oneshot_start':
/home/raiden00/git/RTOS/nuttx/nuttx/include/nuttx/timers/oneshot.h:285:10: error: implicit declaration of function 'timespec_to_tick'; did you mean 'timespec_get'? [-Wimplicit-function-declaration]
285 | tick = timespec_to_tick(ts);
| ^~~~~~~~~~~~~~~~
| timespec_get
This adds IS_POWER_OF_2 macro to help catching config errors at
build time.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
sched implementation not depends on macro abstraction, so revert below commit:
This reverts commit 4e62d0005a
This reverts commit 0f0c370520
This reverts commit ad0efd04ee
Signed-off-by: chao an <anchao@lixiang.com>
pointer comparison is unsigned, when returning -errno will be converted
to a large positive number, can not enter the error handling branch,
therefore, the error code is returned directly and the sem is returned
through the parameters.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
After change, when CONFIG_PM_NDOMAINS > 1,
the pm_register will not able to get notificaion
from not PM_IDLE_DOMAIN.
Should use pm_domain_register as a replacement.
Isolate domains from global callbacks can decrease
not necessary execution, and reduce the
lock instruction requirements.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
umm_memdump() should be always declared otherwise we get error when DEBUG_MM=n:
sched/task/task_exithook.c:468:7: error: implicit declaration of function ‘umm_memdump’; did you mean ‘mm_memdump’? [-Wimplicit-function-declaration]
MCP794XX supports digital trimming that periodically adds or subtracts
clock cycles, resulting in small adjustments in the internal timing.
This way inaccuracies of clock source can be compensated.
This commit adds option to set the trimming register for MCP794XX.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
The definition of nxsched_process_cpuload_ticks uses clock_t, which is
portable across uint32_t and uint64_t timers, and works if CONFIG_SYSTEM_TIME64 is
defined.
only when first time change state can hold WFI for enough time thresh,
allow second time goto target state,
suitable for the case when wakeup from sleep too slow, etc.
Signed-off-by: buxiasen <buxiasen@xiaomi.com>
Some drivers may set too big quota by accident and consume all of our
buffers, so we add a check when registering devices.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
we removed "select SCHED_RESUMESCHEDULER",
As SCHED_RESUMESCHEDULER is not a necessary feature in SMP,
turning it on by default may affect performance.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Implement the bzero function as an alternative to macro expansion.
and support gcc FORTIFY_SOURCE features for nuttx libc
This function will use gcc's function
__builtin_dynamic_object_size and __builtin_object_size
Its function is to obtain the size of the object through compilation,
so as to judge whether there are out-of-bounds operations in commonly used functions.
It should be noted that the option -O2 and above is required to enable this function
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
This revises vm_map_region() by accepting unaligned paddr, which is
aligned-down before mapping and in-page offset is then added to vaddr
before returning. It also moves vm_map_region() and vm_unmap_region()
to vm_region.c.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Also extend the "struct phy_desc_s" to support for 1GB PHY's, the speed
detection always needs more than one bit.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
In the gcc-riscv compiler, __builtin_ffs will call ffs, and calling __builtin_ffs in ffs will cause recursion
Change ffs to an inline function, and compile ffs implemented by nuttx by default.
Only call the implementation of nuttx when the compiler cannot provide an ffs implementation.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
This patch adds definitions to support user space device mappings
that allows devices like frame buffer to be accessible from user
space in kernel mode.
The are mainly two changes:
- in `mm/`:
added vm_map_region(), vm_unmap_region() for drivers to do
device mapping easily.
- in `arch/`:
extended ARCH_SHM_NPAGES as user-space mapping region size.
decoupled ARCH_SHM_MAXREGIONS from region size calculations and
limit its usage only for SysV shm purposes.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Support the network interface card driver to receive zero copies of packets and send and receive giant frame packets, allowing drivers to initialize the DMA buffer to the iob structure, and we can apply for IOB with large memory
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Now we only supports conntrack info from NAT entries, to let our apps in user space know the mapping status in NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This commit adds support for reallocarray function. The functionality
is the same as for standard realloc, but the function also checks for
multiplication overflow and fails safely in case it occurs.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
In order to ensure the detached thread obtain the correct return
value from pthread_join()/pthread_cancel(), the detached thread
will create joininfo to save the detached status after thread
destroyed. If there are too many of detached threads in the
process group, the joininfo will consume too much memory.
This is not friendly to embedded MCU devices.
This commit keep the semantics as #11898 was introduced,
will no longer save joininfo for detached threads to avoid wasting memory.
Signed-off-by: chao an <anchao@lixiang.com>
iC-JX expander has NINT (not interrupt) pin that goes to logical zero
if interrupt occurs. This commit adds support for iC-JX options settings
that allows to enable the interrupt for defined input pins.
The interrupt is handled in HP worker thread to avoid waiting for SPI
transfers in interrupt context. Board has to configure interrupt event
for GPIO pin connected to NINT.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This patch uses "struct mm_map_entry_s" instead of the non-existing
"struct mm_map_entry" with minor revision on comments.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
fix build break if enable CONFIG_DISABLE_MQUEUE:
In file included from sched/mqueue/mqueue.h:38,
from group/group_leave.c:45:
include/nuttx/mqueue.h:124:26: error: ‘CONFIG_FS_MQUEUE_NPOLLWAITERS’ undeclared here (not in a function); did you mean ‘CONFIG_SERIAL_NPOLLWAITERS’?
124 | FAR struct pollfd *fds[CONFIG_FS_MQUEUE_NPOLLWAITERS];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| CONFIG_SERIAL_NPOLLWAITERS
Signed-off-by: chao an <anchao@lixiang.com>
which is useful in the m2m usage scenario, by replacing the first
argument of callback from "struct v4l2_ops_s *" to "struct file *"
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
The video_controls.h is a public header file, and it is used by
videoio.h. So it should be moved to the include/sys directory.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
In SMP mode, up_cpu_index()/this_cpu() are the same, both return the index of the physical core.
In AMP mode, up_cpu_index() will return the index of the physical core, and this_cpu() will always return 0
| #ifdef CONFIG_SMP
| # define this_cpu() up_cpu_index()
| #elif defined(CONFIG_AMP)
| # define this_cpu() (0)
| #else
| # define this_cpu() (0)
| #endif
Signed-off-by: chao an <anchao@lixiang.com>
This driver is based on ESP32 TWAI CAN drivers currently available
in Nuttx, and captures the differences currently present across the
TWAI drivers for easy future adaption to remaining ESP32 platforms
with no loss of support/function. Also provides a generic SJA1000 CAN
driver solution that is CPU-architecture independent.
Changes:
- Low-level driver re-written to allow usage independent of CPU
architecture, and support both SJA1000 and TWAI CAN controllers.
- Platform-specific settings abstracted away to be provided by board
layer.
- Support for multiple instances of SJA1000 driver.
The overhead of spinlok is less than mutext (mutex need to call
enter_critical section.)
After this patch, `down_write_trylock` and `down_read_trylock` can be
use in interrupt context.
The instruction is protected with mutex only one instruction so using
spinlock is better.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Purpose: make the the os crash when busyloop with interrupt disable
Follow the arm gicv2 spec, if we want to use the IRQ and FIQ
simultaneously when not using the processor Security Externsions.
We should:
1. IRQ to Group 1 and FIQ to Group 0;
2. Set CICC_CTLR.FIQEn to 1;
Then in NuttX:
1. implement the arm_decodefiq and directly crash in it;
2. provide interface to change the IRQ to FIQ, e.g. change the
watchdog IRQ to FIQ, so the watchdog can trigger even with the
interrupt disabled (up_irq_save() called);
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
Signed-off-by: ligd <liguiding1@xiaomi.com>
