Commit Graph

316 Commits

Author SHA1 Message Date
David Sidrane
1c488eb864 sched_note:Allow for external endpoints - spelling 2020-09-10 10:01:36 -06:00
David Sidrane
80405e15dd sched_note:Allow for external endpoints 2020-09-10 22:06:32 +08:00
Xiang Xiao
952af92690 sched/note: Move the circle buffer code to driver
so the format code can be shared by different transport

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-09-07 11:54:10 +08:00
Masayuki Ishikawa
08c4376606 arch, include, sched : Refactor ARCH_GLOBAL_IRQDISABLE related code
Summary:
- ARCH_GLOBAL_IRQDISABLE was initially introduced for LC823450 SMP
- At that time, i.MX6 (quad Cortex-A9) did not use this config
- However, this option is now used for all CPUs which support SMP
- So it's good timing for refactoring the code

Impact:
- Should have no impact because the logic is the same for SMP

Testing:
- Tested with board: spresense:smp, spresense:wifi_smp
- Tested with qemu: esp32-core:smp, maix-bit:smp, sabre-6quad:smp
- Build only: lc823450-xgevk:rndis, sam4cmp-db:nsh

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-09-03 10:20:20 +08:00
Xiang Xiao
d43bf7717e sched: Support config the argument passed to init
it is useful to pass the nonempty argument to change the init task behaviour

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I684e9c76b9eac54404d0e4e63ab78e51e039c9a8
2020-08-17 12:52:28 -06:00
Xiang Xiao
acca9fcc3b sched/wdog: Remove MAX_WDOGPARMS and related stuff
since the variable arguments are error prone and seldom used.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-08-14 08:19:50 -06:00
Xiang Xiao
a0ce81d659 sched/wdog: Don't dynamically allocate wdog_s
to save the preserved space(1KB) and also avoid the heap overhead

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I694073f68e1bd63960cedeea1ddec441437be025
2020-08-11 12:28:55 -06:00
Xiang Xiao
154852acb5 sched/mqueue: Reduce the initial memory consumption
Change the preallocated message and descriptor from 32/24 to 4.
The total size is reduce from 1892 to 532

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I79d199465daef678986868f773876289859f42fc
2020-08-10 08:07:50 +02:00
Xiang Xiao
e1d3627bb1 sched/wdog: Change the default value of MAX_WDOGPARMS from 4 to 2
since the maximum number of argument pass to wd_start in the whole
code base is 2 and change CONFIG_MAX_WDOGPARMS in some defconfig
from 1 to 2 oherwise pthread_condclockwait will fail

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ib6cb28b8c0722058849e7be916e164513431d21c
2020-08-06 10:36:22 -06:00
Nakamura, Yuuichi
02718f0827 Syscall instrumentation build system support for Arm and RISC-V 2020-07-22 12:01:40 -05:00
Gregory Nutt
69e97c19ea sched/sched/sched_note.c: Implement interrupt/syscall support
A previous PR added interrupt and system call scheduler notes.  This addess buffering support for those notes.
2020-06-16 20:42:22 +01:00
Gregory Nutt
ed9532e31f CONFIG_SCHED_INSTRUMENTATION_SYSCALL should not available if the architecture does not support the required system hook note hooks. 2020-06-16 14:04:53 -03:00
Yuuichi Nakamura
df2bc1e4c3 Add syscall and irqhandler hooks in sched_note.h 2020-06-16 14:04:53 -03:00
Xiang Xiao
6982eb35fe sched: Remove SCHED_EXIT_KILL_CHILDREN option
All standard indicate exit should terminate the whole process/task:
https://pubs.opengroup.org/onlinepubs/007904975/functions/exit.html
https://en.cppreference.com/w/c/program/exit
https://linux.die.net/man/2/exit
so let's remove the option and trust the caller know the difference:
1.exit terminate all threads belong the current process/task
2.pthread_exit only terminate the current(main/pthread) thread

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I2950ddee3d471272bb9570782f1cd4af33513d57
2020-06-15 07:17:43 -06:00
Gregory Nutt
a569006fd8 sched/: Make more naming consistent
Rename various functions per the quidelines of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions

    nxsem_setprotocol -> nxsem_set_protocol
    nxsem_getprotocol -> nxsem_get_protocol
    nxsem_getvalue -> nxsem_get_value
2020-05-17 14:01:00 -03:00
Xiang Xiao
517974787f Rename clock_systime[r|spec] to clock_systime_[ticks|timespec]
follow up the new naming convention:
https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions
2020-05-10 14:35:50 -06:00
Gregory Nutt
153eee6de2 Make more OS internal names consistent
1. Internal scheduler functions should begin with nxsched_, not sched_
2. Follow the consistent naming patter of https://cwiki.apache.org/confluence/display/NUTTX/Naming+of+OS+Internal+Functions

    # clock_systimer -> clock_systime_tick
    # clock_systimespec -> clock_systime_timespec
    sched_oneshot_extclk -> nxsched_oneshot_extclk
    sched_period_extclk -> nxsched_period_extclk
    # nxsem_setprotocol -> nxsem_set_protocol
    # nxsem_getprotocol -> nxsem_get_protocol
    # nxsem_getvalue -> nxsem_get_value
    nxsem_initholders -> nxsem_initialize_holders
    nxsem_addholder -> nxsem_add_holder
    nxsem_addholder_tcb -> nxsem_add_holder_tcb
    nxsem_boostpriority -> nxsem_boost_priority
    nxsem_releaseholder -> nxsem_release_holder
    nxsem_restorebaseprio -> nxsem_restore_baseprio

Some planned name changed were skipped for now because they effect too many files (and would require many hours of coding style fixups).
2020-05-10 22:47:07 +08:00
Gregory Nutt
4301682fbc Fix up some problems/issues remaining from PR 1007
1. Add missing conditional logic in include/sys/syscall_lookup.h
2. CONFIG_NPTHREAD_KEYS removed from code but was still in sched/Kconfig
3. Refresh all configurations affected by PR 1007
4. syscall/syscall_funclookup.c needs to include nuttx/tls.h
2020-05-08 20:13:40 +01:00
Xiang Xiao
ddda00ea65 Kconfig: Refine BUILD_FLAT, BUILD_PROTECTED and BUILD_KERNEL usage
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 12:16:18 -06:00
YAMAMOTO Takashi
f8077022bd Introduce CONFIG_DEFAULT_TASK_STACKSIZE
* The appropriate size of stack varies among archs.
  E.g. for 64-bit sim, 2048 is way too small, especially when the task
  happens to use host OS functionalities.
  I plan to allow an arch provide its own default.

* I plan to use this to replace hardcoded "STACKSIZE = 2048" in APPDIR.
2020-03-26 22:30:13 -05:00
YAMAMOTO Takashi
061b796d47 Adapt dlfcn/modlib to use the instruction memory allocator 2020-03-16 07:54:49 -06:00
Xiang Xiao
cde88cabcc Run codespell -w with the latest dictonary again
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-23 22:27:46 +01:00
Xiang Xiao
bd4e8e19d3 Run codespell -w against all files
and fix the wrong correction
2020-02-22 14:45:07 -06:00
chao.an
52484b1b8c sched/Kconfig: add PATH_MAX config 2020-02-19 12:43:34 -06:00
Juha Niskanen
a762c06ed9 Fix typos and some incorrect comments
Author: Alan Carvalho de Assis <acassis@gmail.com>

    Run nxstyle against .c and .h files and fix it

Author: Juha Niskanen <juha.niskanen@haltian.com>

    Fix typos and some incorrect comments
2020-01-20 09:32:36 -03:00
Gregory Nutt
ac1b96ba1e Update ReleaseNotes in preparation for the nuttx-8.2 release. 2019-11-16 08:23:09 -06:00
liuhaitao
b2f8a79c3b sched/signal: Add support for SIGPIPE. SIGPIPE uses SIG_SIGPIPE_ACTION which terminates process by default. It also could be ignored. 2019-10-17 11:29:39 -06:00
Juha Niskanen
e8b5dd4528 Fix use of undefined pp-token #errror, other typos. 2019-09-19 18:19:18 -06:00
igd
32bac84548 sched/Kconfig, sched/signal/sig_notification.c: Add configuration option to decide select either the high-priority or low-priority work queue for SIG_EVTHREAD notifications. 2019-08-26 10:54:49 -06:00
Nathan Hartman
248f75fda4 sched/Kconfig: Fix minor typos. 2019-08-18 18:04:08 -06:00
Gregory Nutt
ec5120f69e sched/group and syscall/: Implement 'real' setuid, getuid, setgid, and getgid interfaces. These will be inheritance by all child task groups. 2019-08-06 14:13:43 -06:00
Juha Niskanen
abc49a6a13 arch/arm/src/stm32l4: if SRAM3 is used as heap, do not power it off in stop 2 mode. 2019-06-13 05:52:40 -06:00
Gregory Nutt
abf6965c24 Squashed commit of the following:
libs/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    syscall/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    wireless/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    Documentation/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    include/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    drivers/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    sched/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    configs:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/xtensa:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/z80:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/x86:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/renesas and arch/risc-v:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    arch/or1k:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/misoc:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/mips:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/avr:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
    arch/arm:  Remove all references to CONFIG_DISABLE_SIGNALS.  Signals are always enabled.
2019-04-29 14:52:05 -06:00
Gregory Nutt
b290160b3b Rename sched_process_timer to nxsched_process_timer. That is the appropriate name for an internal sched/ function (still many named incorrectly). 2019-03-20 19:27:40 -06:00
Valmantas Paliksa
d7a602e9b2 sched/sched and include/nuttx/arch.h: Rename sched_process_cpuload to nxsched_process_cpuload. All internal sched_ functions should be prefixed with nx. Remove duplicate prototype from nuttx/arch.h. 2019-03-20 08:01:27 -06:00
Gregory Nutt
c8004c7e00 tools/nxstyle.c: Add capability to detect CamelCase identifiers. 2019-03-05 13:08:57 -06:00
Gregory Nutt
5fe6981c9a Squashed commit of the following:
libs/libc/pthread/pthread_spinlock.c:  Resolve several TODO issues by accessing up_testset() via the boardctl() interface rather than attempting to call it directly.

    configs/boardctl.c, include/sys/boardctl.h:  Add access to architecture-specific up_testset() via boardctl().

    arch/Kconfig's, sched/Kconfig, and include/nuttx/spinlock.h:  Spinlocks are not available unless the architecture supports the up_testset() operation.
2019-03-04 14:22:50 -06:00
Gregory Nutt
2fbec4cdf6 Doumentation/NuttxPortingGuide.html: Add description of board_early_initialize() and board_late_initialize(). 2019-02-18 17:36:11 -06:00
Gregory Nutt
32a300806e Let's rename board_driver_initialize() to board_early_initialize() to emphasize its relationship to board_late_initialize(). 2019-02-18 16:25:08 -06:00
Gregory Nutt
a76e137ce2 Squashed commit of the following:
sched/init/nx_start.c:  Add support for CONFIG_BOARD_DRIVER_INITIALIZE.  If this option is selected then nx_start() will call a board-provided function board_driver_initialize() immediately after calling up_initialize().

    Rename CONFIG_BOARD_INITIALIZE to CONFIG_BOARD_LATE_INITIALIZE.

    Raname board_initialize() to board_late_initialize()
2019-02-18 15:32:00 -06:00
Gregory Nutt
967dc523bb sched/: Remove the option CONFIG_BOARD_INITTHREAD. Now, if CONFIG_BOARD_INITIALIZE is selected, then the board_initialize() logic will ALWAYS run on an internal kernel thread. This will prevent the problems people have had doing inappropriate board_initialization on the IDLE thread. 2019-02-12 19:13:22 -06:00
Gregory Nutt
a64869aa67 CONFIG_NFILE_DESCRIPTORS=0 can no longer be used to disable the file system. NuttX with no file system does not make sense.
Squashed commit of the following:

    configs/:  The few configurations that formerly set CONFIG_NFILE_DESCRIPTORS=0 should not default, rather they should set the number of descriptors to 3.
    fs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    tools/:  Tools updates for changes to usage of CONFIG_NFILE_DESCRIPTORS.
    syscall/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    libs/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    include/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    drivers/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    Documentation/:  Remove all references to CONFIG_NFILE_DESCRIPTORS == 0
    binfmt/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    arch/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    net/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/:  Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS == 0
    sched/Kconfig:  CONFIG_NFILE_DESCRIPTORS may no longer to set to a value less than 3
    configs/:  Remove all settings for CONFIG_NFILE_DESCRIPTORS < 3
2019-02-11 12:09:26 -06:00
Gregory Nutt
bb623d1e04 This commit renames all internal OS functions defined under sched/task so that they begin with the prefix. For example, nxtask_exit() vs. task_exit().
Squashed commit of the following:

    Trivial, cosmetic
    sched/, arch/, and include:  Rename task_vforkstart() as nxtask_vforkstart()
    sched/, arch/, and include:  Rename task_vforkabort() as nxtask_vforkabort()
    sched/, arch/, and include:  Rename task_vforksetup() as nxtask_vfork_setup()
    sched/:  Rename notify_cancellation() as nxnotify_cancellation()
    sched/:  Rename task_recover() to nxtask_recover()
    sched/task, sched/pthread/, Documentation/:  Rename task_argsetup() and task_terminate() to nxtask_argsetup() and nxtask_terminate(), respectively.
    sched/task:  Rename task_schedsetup() to nxtask_schedsetup()
    sched/ (plus some binfmt/, include/, and arch/):  Rename task_start() and task_starthook() to nxtask_start() and nxtask_starthook().
    arch/ and sched/:  Rename task_exit() and task_exithook() to nxtask_exit() and nxtask_exithook(), respectively.
    sched/task:  Rename all internal, static, functions to begin with the nx prefix.
2019-02-04 13:42:51 -06:00
Gregory Nutt
6408857f6d sched/sched/sched_processtimer.c: Add a configurable call out to a user-provided function, 'timer hook', on each timer interrupt. 2019-01-30 07:22:44 -06:00
Gregory Nutt
cc8878f08a sched/Kconfig: Change SCHED_NOTE_GET type from int to bool~ 2019-01-27 11:04:54 -06:00
Xiang Xiao
fe421022e2 sched/wqueue/kwork_notifier.c and several Kconfig files: Notifier should work with either lpwork or hpwork and other minor typo fix. 2019-01-27 11:02:56 -06:00
Xiang Xiao
e57f7cf6ae Critical Section Monitor (sched/ and fs/procfs: Remove SCHED_IRQMONITOR_GETTIME to simplify the clock source selection: (1) Use up_critmon_gettime if SCHED_IRQMONITOR, (2) Call clock_systimespec if SCHED_TICKLESS, (3) Don't collect timing info for all other cases and move up_critmon_* to arch.h avoid the duplicated declaration. 2019-01-27 10:13:28 -06:00
Xiang Xiao
c43e4673ab sched/Kconfig, libs/libc/dllfcn/Kconfig, libs/libc/modlib/Kconfig: Refine ELF related configurations. 2019-01-26 11:50:09 -06:00
Gregory Nutt
8b21960ba3 sched/pthread: Implement pthread_key_delete(). This involves some minor changes to the group data structure. 2018-12-28 14:21:19 -06:00
David Sidrane
bf6f44dec8 sched/Kconfig and sched/init/os_bringup.c: Allow the init task priority to be set. 2018-12-20 10:49:10 -06:00
Gregory Nutt
d8cf3bfe25 Rethink some of the conditional logic of commit 1ac9558460: If the Critical Section Monitor enabled, that that platform-specific timer should be used to measure interrupt processing time, no matter what. 2018-11-26 12:18:58 -06:00
Gregory Nutt
1ac9558460 sched/irq and sched/sched: Measurement of interrupt handler duration used to be available only in Tickless mode since it used the high resolution Tickless timer to measure interrupt time. This commit adds CONFIG_SCHED_IRQMONITOR_GETTIME which, if enabled, will force the interrupt duration caculation to use the same high-resolution, platform-specific timer as is used with the Critical Section Monitor. This leads to two improvements: (1) You can now measure interrupt duration in non-Tickless mode, and (2) in either mode, the interrupt duration and the critical section measures will use the same high-resulotion timer and should, therefore, never be any descripancy due to different clock sources. 2018-11-26 11:29:20 -06:00
Gregory Nutt
80e7107c9f sched/irq/Make.defs: Fix warning about irq_csection.o appearing multiple times in the same rule. 2018-11-25 17:22:33 -06:00
Gregory Nutt
4ca7b72a98 sched/Kconfig: Simplify some configurations. This adds configuration settings that control individual features, rather than long complex OR expressions that determines if an individual feature is required. 2018-11-25 11:50:15 -06:00
Gregory Nutt
a1cb270478 configs/stm32f4discovery: Add timing support for the critical section monitor using the DWT CYCNT register. 2018-11-24 11:06:34 -06:00
Gregory Nutt
fc6084f311 Squashed commit of the following:
fs/procfs/fs_procfsproc:  Extended the process ID ProcFS output to show per-thread maximum time for pre-emption disabled and maximum time within a critical section.

    sched/sched/sched_critmonitor.c:  Adds data collection logic in support of monitoring critical sections and pre-emption state.
2018-11-24 10:32:45 -06:00
zhangyuan7
da737f3167 sched/group/group_foreachchild.c: group_foreachchild iterate by reverse order since the callback(e.g. group_killchildren) may remove the tcb from list
sched Kconfig and sched/task/exit.c:  Add SCHED_EXIT_KILL_CHILDREN option to kill all child threads when the main thread of a task exits.
2018-11-08 07:03:30 -06:00
Gregory Nutt
11a635dcb3 mm/iob: IOB free notifier should accept the work queue ID as a paramter. The notification may need to run on either the high- or low- priority work queue. sched/work: Change the default priority of the low-priority work queue to 100. 2018-09-11 08:49:39 -06:00
Gregory Nutt
4cb61bd8c2 sched/wqueue: Notifier design cleanup. The original concept used pre-allocated notification data structures. However, the notification dat must persist for an indeterminate amount of time. So the design was modified to use dynamically allocted data structures. This commit simplifies the design by removed some residual 'machinery' that is no longer needed. 2018-09-10 06:29:51 -06:00
Gregory Nutt
9d3148406c Signals were not a good choice of IPC to implement the poll function for several reasons: In order to handle the asynchrnous poll-related event, a substantial amount of state information is needed. Signals are only capable of passing minimal amounts of data. There are also complexities with performing kernel space signal handlers in kernel space code that is better to avoid. So, instead of signals, the equivalent logic was converted to run via a callback that executes on the high-priority work queue.
Squashed commit of the following:

    Fix up some final compile isses.

    net/netdev:  Convert the network down notification logic to use the new wqueue-based notification factility.

    net/udp:  Convert the UDP readahead notification logic to use the new wqueue-based notification factility.

    net/tcp:  Convert the TCP readahead notification logic to use the new wqueue-based notification factility.

    mm/iob:  Convert the IOB notification logic to use the new wqueue-based notification factility.

    sched/wqueue:  Signals are not good IPCs to support the target poll functionality for several reasons including the amount of data that can be passed with a signal and in the fact that in protected and kernel modes, user threads executing signal handlers in protected, kernel memory is problematic.  Instead, convert the same logic to perform the notifications via function callback on the high priority work queue.
2018-09-09 15:01:44 -06:00
Gregory Nutt
32e3e51678 net/netdev: Add signal notification for the case where the network goes down. 2018-09-09 10:39:25 -06:00
Gregory Nutt
fc127fd297 sched/signal: Add a generic signal notification facility. Modify the custom IOB available notifier so that it is now just a wrapper around this generic signal notification. This generic signal notification faility will, eventually, be used to support network polling.
Squashed commit of the following:

    mm/iob:  The IOB available notifier is now just a wrapper around the common signal notifier.

    sched/signal:  Add a generic signal notification facility.

    sched/signal/sig_evthread.c:  More trivial naming changes.

    sched/signal:  Rename nxsig_notification() to nxsig_evthread() to make forthcoming naming additions more consistent.
2018-09-09 08:32:37 -06:00
Gregory Nutt
a7265d71c6 This commit adds support for default signal actions for SIGSTOP, SIGSTP, and SIGCONT.
Squashed commit of the following:

    Add procfs support to show stopped tasks.  Add nxsig_action() to solve a chicken and egg problem:  We needed to use sigaction to set default actions, but sigaction() would refuse to set actions if the default actions could not be caught or ignored.

    sched/signal:  Add configuration option to selectively enabled/disable default signal actions for SIGSTOP/SIGSTP/SIGCONT and SIGKILL/SIGINT.  Fix some compilation issues.

    sched/sched:  Okay.. I figured out a way to handle state changes that may occur while they were stopped. If a task/thread was already blocked when SIGSTOP/SIGSTP was received, it will restart in the running state.  I will appear that to the task/thread that the blocked condition was interrupt by a signal and returns the EINTR error.

    sched/group and sched/sched:  Finish framework for continue/resume logic.

    sched/signal:  Roughing out basic structure to support task suspend/resume
2018-08-30 10:27:18 -06:00
Gregory Nutt
0756cf66ed sched/signal: Add support for SIGINT in addition to SIGKILL. drivers/serial: Use SIGINT instead of SIGKILL when control-C is pressed. 2018-08-28 12:15:31 -06:00
Gregory Nutt
499b89feed sched/signal: Default Signal Actions. Change some types to superficially simplify. Add configuration options to enabled default signal behaviors on a per-signal basis. I don't think users are prepared for SIGALRM to terminate the task (which is the correct default behavior if you don't change it). Extend the implementation of default signals so that it is totally table driven and extensible by simply mondifying the content of const tables. 2018-08-27 15:37:43 -06:00
Gregory Nutt
c0d234a474 Squashed commit of the following:
drivers/serial/Kconfig:  It is no longer necessary to restrict Ctrl-C handling to the FLAT build

    sched/signal:  Add a new configuration option to select signal default actions, separate handling of signal default actions from both task startup logic and from the serial TTY Ctrl-C logic.  Add a signal set in the group structure to keep track of what signals have been set to the default action.  In dispatching signals in PROTECTED or KERNEL mode, use this signal set to determine if the default signal handler is attached and dispatch the signal in kernel mode for the default actions.
2018-08-27 11:40:09 -06:00
ligd
11f8dc735c Squashed commit of the following:
drivers/serial:  Add Ctrl-C/Ctrl-X support.  This is an initial working implementation that still requires that several details be resolved.

    sched/task/task_start.c: Add default signal action to SIGKILL.
2018-08-26 08:49:08 -06:00
xuanlin
7e63b0b288 sched/wqueue, libs/libc/wqueue, configs: Remove work queue polling delay to simplify the code logic and save the power. 2018-08-25 14:58:07 -06:00
ligd
631071cded Squashed commit of the following:
sched/wqueue:  Modify high priority work queue to support multiple threads.

    sched/wqueue and libs/libc/wqueue:  workqueues don't need set global data to zero since .bss is cleared automatically.  Removing this unnecessary initialization also avoids the loss the work items queued before initialization.
2018-08-25 14:52:13 -06:00
Gregory Nutt
3931eaf015 sched/Kconfig: Fix a warning found in build testing. 2018-08-24 16:14:21 -06:00
zhuguangqing
d38be46655 sched/irq: Add support interrupt chains in NuttX. IRQ chain is very useful in these cases: (1) Multiple hardware connect to the same request line(e.g. PCI), (2) Need multiple driver to support one hardware block (like Linux MFD) 2018-08-24 15:10:23 -06:00
Xiang Xiao
3af35699b9 include/nuttx/clock.h, sched/sched: Support the CPU load measurement using timer_lowerhalf_s interface 2018-08-24 10:10:57 -06:00
anchao
95163b2c59 Squashed commit of the following:
Author: Xiang Xiao <xiaoxiang@xiaomi.com>

     arch/arm/src/armv7-m:  Implement SYSTICK timer driver

   Author: anchao <anchao@pinecone.net>

     configs/sim/loadable:  Add loadable demo for arch sim
     sched/init: Restore previously reverted option to mount block device for INIT_FILEPATH case
     configs/stm3240g-eval/knxwm: Fix build breakage.

   Author: Gregory Nutt <gnutt@nuttx.org>
     configs:  With recent changes to apps/ all configurations that build applications as modules must now also select CONFIG_APPS_LOADABLE.

   Author: anchao <anchao@pinecone.net>
      configs/sim/loadable:  Add loadable demo for arch sim
       Kconfig and tools/Makefile.unix and : add dynamic application loadable support
2018-08-23 11:08:22 -06:00
Gregory Nutt
b56d5a7548 Revert "sched/init: Add option to mount block device for INIT_FILEPATH case"
This reverts commit e5f9b7d66b.
2018-08-22 07:29:55 -06:00
Xiang Xiao
e5f9b7d66b sched/init: Add option to mount block device for INIT_FILEPATH case 2018-08-22 06:57:00 -06:00
anchao
0124b629a9 sched/symtab: Reference default symtab name to binfmt 2018-08-22 06:21:20 -06:00
Gregory Nutt
c2267a57a0 Kconfig files: Fix several errors noted by Alex Denisov in Bitbucket issue 115. 2018-08-05 10:48:02 -06:00
Alan Carvalho de Assis
283b73edc5 Fix lots of typos in C comments and Kconfig help text 2018-07-08 18:24:45 -06:00
Gregory Nutt
450e0809de sched/Kconfig: Add a dependency 2018-06-16 11:36:27 -06:00
Gregory Nutt
31278bc163 Kconfigs: Add comments and a dependency. 2018-02-04 16:32:14 -06:00
Gregory Nutt
0080225473 sched/irq: Add a configuration option to show interrupt information via a procfs file. 2018-01-12 18:26:46 -06:00
Gregory Nutt
7d131fe711 Update TODO list 2018-01-03 08:32:57 -06:00
Masayuki Ishikawa
6150299f54 Merged in masayuki2009/nuttx.nuttx/irq_spinlock (pull request #550)
SMP: Introduce spin_lock_irqsave() and spin_unlock_irqrestore()

These APIs are simplified version of enter_critical_section() and
leave_critical_section() to protect data (e.g. registers) in SMP mode.
By using these APIs inside drivers, performace will be improved.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-07 19:39:04 +00:00
Jussi Kivilinna
8eaa587c98 sched: move POSIX thread specific data from pthread TCB to common TCB structure. This change allows using pthread_getspecific/pthread_setspecific from main thread. Patch also enables using pthread data with config option CONFIG_DISABLE_PTHREAD=y. 2017-10-25 07:06:42 -06:00
Gregory Nutt
42a0796615 Squashed commit of the following:
sched/semaphore:  Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable.  Changed all references to sem_post in the OS to nxsem_post().

    sched/semaphore:  Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable.  Changed all references to sem_destroy() in the OS to nxsem_destroy().

    libc/semaphore and sched/semaphore:  Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable.  Changed all references to sem_setprotocol in the OS to nxsem_setprotocol().  sem_getprotocol() was not used in the OS
2017-10-03 15:35:24 -06:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
b51b72b2db pthreads: Re-order some operations so that mutexes are placed in the inconsistent state BEFORE the clean-up callbacks are called. 2017-04-10 08:11:16 -06:00
Gregory Nutt
941360bf12 Correct some spacing 2017-03-27 10:49:41 -06:00
Gregory Nutt
b07d3fc305 Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES 2017-03-27 09:08:14 -06:00
Gregory Nutt
666208cf23 pthread mutexes: Add option to support both unsafe and robust mutexes via pthread_mutexattr_get/setrobust(). 2017-03-26 18:37:24 -06:00
Gregory Nutt
8b3c554e45 pthreads: Add a configuration option to disable robust mutexes and revert to the traditional unsafe mutexes. 2017-03-26 17:37:28 -06:00
Gregory Nutt
f5a957158d Review of last PR: Setting CONFIG_SMP_NCPUS=1 should only be permitted in a debug configuration. 2017-03-22 06:29:38 -06:00
Masayuki Ishikawa
a1f0802855 Kconfig: Change the minimum SMP_NCPUS to 1 2017-03-22 10:04:37 +09:00
Gregory Nutt
c976a66f8d net/drivers/skeleton.c: Back out serialization changes of the last commit. They are not necessary in the skeleton.c example because the calls to net_lock() at the beginning of each worker function will enforce serialization. 2017-03-04 11:33:36 -06:00
Gregory Nutt
47ebe1e320 Update some comments 2017-03-03 12:48:58 -06:00
Gregory Nutt
04c9ccdd2d Update TODO list and some Kconfig comments. 2017-03-03 09:20:25 -06:00
Masayuki Ishikawa
d78113e4ad Revert "CONFIG_START_YEAR/MONTH/DAY not required if an RTC is used"
This reverts commit 4035ed8c6c.
2017-03-03 10:42:10 +09:00
Gregory Nutt
2c45f482b1 Module names are not needed in libc/modlib when the module library is used only for shared library support. 2017-01-29 12:23:24 -06:00
Gregory Nutt
5e94dd22bb Modules: Move first five of many C files from sched/module to libc/modlib 2017-01-29 10:05:15 -06:00
Gregory Nutt
2717e781f0 libc/modlib: Add build a configuration logic for a shared module library. 2017-01-29 08:55:27 -06:00
Gregory Nutt
68a7110195 sched/modules: Add support for dependencies between modules. 2017-01-27 11:43:27 -06:00
Gregory Nutt
1823c78663 Update some comments 2017-01-22 10:17:51 -06:00
Gregory Nutt
686041f8e7 CPU load: Correct computation of the nominal period to use when the source is a oneshot timer. 2017-01-22 07:12:22 -06:00
Gregory Nutt
edd9186540 ELF: Move ARMv7-A and ARMv7-R versions of ELF relocation logic to libc/machine 2017-01-21 14:40:26 -06:00
Masayuki Ishikawa
acbfa47f70 sched_note: Fix spinlock instrumentation 2017-01-12 08:04:28 -06:00
Gregory Nutt
018eb7c1d2 Cancellation points no longer depend on EXPERIMENTAL 2016-12-09 17:44:37 -06:00
Gregory Nutt
acaae12e8b Add pthread_testcancel(), pthread_testcancel(), and definitiions for cancellation types. 2016-12-09 07:23:00 -06:00
Gregory Nutt
6224e47533 pthread cleanup stack: Replace critical section with sched_lock/unlock(). The cleanup stack modification only needs to have the TCB stationary. The stack is never modified from interrupt level logic 2016-12-08 14:33:02 -06:00
Gregory Nutt
a1fbc2ad0d pthreads: Add pthread_cleanup_push() and pthread_cleanup_pop() 2016-12-08 09:27:13 -06:00
Gregory Nutt
9ee3f3b933 sched_note: Permit spinlock and critical section notes in in-memory buffer iff sched_not_get() interfaces is disabled. 2016-11-28 18:36:26 -06:00
Gregory Nutt
00215fbc98 sched_note: Add spinlock instrumentation; In SMP configurations, select to log only notes from certain CPUs 2016-11-28 10:33:46 -06:00
Gregory Nutt
d65be718c2 sched_note: Extend OS instrumentation to include some SMP events. 2016-11-27 17:14:57 -06:00
Gregory Nutt
120d29b480 Update some Kconfig comments 2016-11-06 09:06:37 -06:00
Gregory Nutt
4997ec7a1e ESP32 Core V2: Add an SMP configuration to support development (not yet usable). 2016-10-29 14:56:07 -06:00
Gregory Nutt
e6377641a8 sched/Kconfig: Add ranges to START_YEAR, MONTH, and DAY 2016-10-27 18:04:14 -06:00
Gregory Nutt
53b2de18eb Trivial typo fix 2016-08-20 13:23:41 -06:00
Gregory Nutt
300361539a sched/sched_cpuload_oneshot: Use the oneshot timer with optional entropy to measuer cPU load if so configured. 2016-08-20 12:47:07 -06:00
Gregory Nutt
246773faa7 Rename CONFIG_SCHED_TIMEKEEPING to CONFIG_CLOCK_TIMEKEEPING. That is a better compartmentalized name. 2016-07-11 06:54:02 -06:00
Max Neklyudov
8db29071da timekeeping: initial implementation 2016-07-10 16:14:25 -06:00
Gregory Nutt
3fa41c0f18 Kconfig files: Fix some dependencies that have CONFIG_ in the variable name 2016-06-17 19:30:19 -06:00
Gregory Nutt
1cdc746726 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:14:08 -06:00
Gregory Nutt
3a74a438d9 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:18 -06:00
Gregory Nutt
bc325bd597 Update Kconfig comments 2016-03-21 18:28:43 -06:00
Gregory Nutt
d20db82fcb Scheduler instrumentation: Fix some associated with monitoring critical sections 2016-03-21 17:08:07 -06:00
Gregory Nutt
f7b58e9dfd sched/: Move location (and form) of context switch instrumentation. 2016-03-21 14:08:31 -06:00
Gregory Nutt
7f19631338 sched/: Add option to buffer scheduler instrumentation data in memory. 2016-03-17 09:49:43 -06:00
Gregory Nutt
24468128de TLS: Simplify 2016-03-11 07:17:32 -06:00
Gregory Nutt
934069e422 TLS: Add logic to get/set arbitrary TLS values 2016-03-10 19:31:22 -06:00
Gregory Nutt
30b6ee96c9 Add basic definitions for TLS support 2016-03-10 11:56:33 -06:00
Gregory Nutt
7cb35587a3 Correct minor typos in a Kconfig file 2016-02-22 08:28:33 -06:00
Gregory Nutt
94bea6547b Fix two unterminated strings in Kconfig files 2016-02-18 17:13:03 -06:00
Gregory Nutt
384e51cb05 Add some additional schedule instrumentation 2016-02-16 15:21:45 -06:00
Gregory Nutt
ddbc948895 SMP: Minor SMP-related clean-up/improvements 2016-02-11 12:18:54 -06:00
Gregory Nutt
89bea6917c Kconfig: Architecture must indicate that it support multiple CPUs in order to enable SMP 2016-02-10 17:31:16 -06:00
Gregory Nutt
f5a3b1e89d Add EXPERIMENTAL configuration option to investigate some SMP issues 2016-02-10 10:27:48 -06:00
Gregory Nutt
2c0ad2564f Add CONFIG_SPINLOCK. Also need spinunlock() and spinlock_initialize() 2016-02-09 15:31:14 -06:00
Gregory Nutt
f348e68069 Update to use 64-bit timer when available 2016-01-21 11:54:26 -06:00
Gregory Nutt
8ee75a96fe Update TODO list and Kconfig help 2016-01-13 07:44:44 -06:00
Gregory Nutt
c1fff4706c signals: Adds a very limited, minimal implementation for SIGEV_THREAD 2015-12-30 15:01:14 -06:00
Gregory Nutt
9835eeb181 signals: Basic framework to support SIGEV_THREAD 2015-12-30 13:20:31 -06:00
Gregory Nutt
49554fe4fc Move module support from binfmt/ to sched/ so that it can be configured and built independently from binfmt features 2015-12-12 07:09:17 -06:00
Gregory Nutt
51f386d08a Fix more common typos 2015-08-16 11:07:23 -06:00
Gregory Nutt
484f148001 Sporadic scheduler: Add instrumentation hooks to support GPIO outputs 2015-07-27 08:37:25 -06:00
Gregory Nutt
27e21710fd This is basically a complete redesign of the sporadic scheduling logic due to limitations in the initial design 2015-07-25 12:50:53 -06:00
Gregory Nutt
ed031388ad sched/Kconfig: The sporadic scheduler option is no longer EXPERIMENTAL 2015-07-24 14:19:18 -06:00
Gregory Nutt
9095e8eab4 include/, sched/, and libc/: Add support for sporadic scheduling parameters in struct sched_param, posix_spawnattr_t, and pthread_attr_t. Update all user interfaces to pass sporadic scheduling parameters. Feature is dependent on EXPERIMENTAL and no changes have yet been made to core scheduling logic. 2015-07-23 13:16:32 -06:00
Gregory Nutt
2b3aae0ddc Add basic configuration options for SCHED_SPORADIC 2015-07-23 10:33:30 -06:00
Gregory Nutt
342f5fe33d Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:08:57 -06:00
Gregory Nutt
1d534ff896 Convert the 64-bit usec limit to a 32-bit tick limit 2015-02-03 07:18:17 -06:00
Gregory Nutt
a448e0f69f On my platform I have just 16-bit timer clocked at 32kHz. As result oneshot timer max delay is 2s. The patch adds limit of maximum ticks in sched_timer_start (nuttx/sched/sched/sched_timerexpiration.c). From Macs N. 2015-02-03 06:25:19 -06:00