Gregory Nutt
|
e3a29a07e2
|
Maple: Rename files for better conformance to standards
|
2015-03-21 07:35:40 -06:00 |
|
Gregory Nutt
|
8665824e62
|
SAM3U-EK: Rename to better conform to naming standard
|
2015-03-21 06:52:32 -06:00 |
|
Gregory Nutt
|
1752d407f2
|
STM32F3 Discovery: Rename files to conform better with naming convention
|
2015-03-21 06:36:28 -06:00 |
|
Gregory Nutt
|
629120777d
|
Add Olimexino-STM32 board support from David Sidrane
|
2015-03-20 18:00:10 -06:00 |
|
Gregory Nutt
|
93e2975141
|
Refresh Configuration
|
2015-03-20 17:45:10 -06:00 |
|
Gregory Nutt
|
316d60909b
|
SAMV71-XULT: Add support for a ConfigData device on the 256 AT24 EEPROM
|
2015-03-19 14:53:05 -06:00 |
|
Gregory Nutt
|
547a2aea5a
|
SAMV7: Add a sneak internal interface that will allow us to set the MAC address before NSH even starts
|
2015-03-18 17:23:40 -06:00 |
|
Gregory Nutt
|
8e2c27f4d5
|
SAMV7: Updates to Ethernet driver based on comparison with Atmel sample code. Add configuration for other PHY GPIOs. Still no Ethernet interrupts
|
2015-03-18 15:55:00 -06:00 |
|
Gregory Nutt
|
2ba7a82738
|
PIC32MZ: More updates from David Sidrane
|
2015-03-18 07:34:39 -06:00 |
|
Gregory Nutt
|
97769595b0
|
Cosmetic update to README
|
2015-03-17 17:10:44 -06:00 |
|
Gregory Nutt
|
aa4c382bcc
|
PIC32MZ: Changes that will permit building of the PIC32MZ Start Kit configuration using MPLAB and the XC32 toolchain. From David Sidrane
|
2015-03-17 14:50:11 -06:00 |
|
Gregory Nutt
|
d3724701b9
|
SAMV7 Ethernet: Support getting IP address from the XULT AT24 EEPROM
|
2015-03-17 14:29:41 -06:00 |
|
Gregory Nutt
|
9849e22d3b
|
SAMV7: Quick'n'dirty port of the SAMA5D4 Ethernet MAC driver to the SAMV7. Still some unresovled issues with DCache handling
|
2015-03-16 13:51:37 -06:00 |
|
Gregory Nutt
|
471cd8491d
|
Trivial update to FAT, comments, README
|
2015-03-15 15:06:17 -06:00 |
|
Gregory Nutt
|
81b8736779
|
This commit enables HSMCI functionality in the SAMV71-XULT. TX DMA is, unfortunately, currently disabled.
|
2015-03-15 12:17:39 -06:00 |
|
Gregory Nutt
|
0b4133c064
|
Update README files
|
2015-03-15 10:22:14 -06:00 |
|
Gregory Nutt
|
f8b664b727
|
SAMA5: Fix a bug in SAMA5 HSMCI. The bitfield mask and shift values were reversed resulting in a trashed value for the number of blocks in the BLOCKR register. This was sufficient to prevent DMA writes from working.
|
2015-03-15 09:35:48 -06:00 |
|
Gregory Nutt
|
79dbd00f54
|
SAMV7: Costmetic changes to SDRAM logic
|
2015-03-14 13:58:34 -06:00 |
|
Gregory Nutt
|
3d34f02168
|
SAMV7: More SDRAM logic. It does still does not work
|
2015-03-14 13:27:00 -06:00 |
|
Gregory Nutt
|
93a58ea955
|
SAMV71-XULT: Add support for SDRAM (unverified)
|
2015-03-14 11:00:46 -06:00 |
|
Gregory Nutt
|
6c262a4dfb
|
SAMV7-XULT: Build support for SDRAM (SDRAM init still missing)
|
2015-03-14 09:16:27 -06:00 |
|
Gregory Nutt
|
0db10d9057
|
Fix some typos in comments and conditioned out code
|
2015-03-14 09:14:51 -06:00 |
|
Gregory Nutt
|
3e0d673d39
|
Update README
|
2015-03-14 07:50:03 -06:00 |
|
Gregory Nutt
|
f89abc4afa
|
SAMV71-XULT: Bring HSMCI and auto-mounter support from SAMA5D4-EK
|
2015-03-13 09:27:16 -06:00 |
|
Gregory Nutt
|
030456a699
|
Update to PIC32MZ README from David Sidrane
|
2015-03-13 06:57:58 -06:00 |
|
Gregory Nutt
|
eb6ff69470
|
SAMV7: Quick'n'dirty port of the SAMA5 HSMCI driver to the SAMV7
|
2015-03-12 18:03:41 -06:00 |
|
Gregory Nutt
|
7fd9380485
|
SAMV71: Quick'n'dirty port of the SAMA5 SSC driver to the SAM7. The IP is compatible but there are still some DMA- and Cache-related issues that need to be worked out.
|
2015-03-12 16:00:38 -06:00 |
|
Gregory Nutt
|
b4f44e9fbb
|
Minor update to README
|
2015-03-12 13:43:54 -06:00 |
|
Gregory Nutt
|
7f4959b864
|
SAMV71-XULT: Enable I2C and the I2C tool in the NSH configuration
|
2015-03-12 12:27:06 -06:00 |
|
Gregory Nutt
|
26ac9361e7
|
SAMV7-XULT: Integrate button support and apps/examples/buttons into the NSH configuration
|
2015-03-11 14:41:58 -06:00 |
|
Gregory Nutt
|
fbee7812f3
|
Update README
|
2015-03-11 12:32:00 -06:00 |
|
Gregory Nutt
|
b587ebaed5
|
SAMV71-XULT: Enable 64-bit floating point support
|
2015-03-11 12:30:14 -06:00 |
|
Gregory Nutt
|
ea75bef0e7
|
SAMV71-XULT: Switch to the ARM GNU tools for Embbeded tools that actually support Cortex-M7
|
2015-03-11 12:16:27 -06:00 |
|
Gregory Nutt
|
ddebe0f9c0
|
SAMV7-XULT: Enable I- and D-caches, correct polaty of LEDs
|
2015-03-11 11:23:19 -06:00 |
|
Gregory Nutt
|
f00d9adc23
|
PIC32MZ: Fixes from Kristopher Tate
|
2015-03-11 10:25:51 -06:00 |
|
Gregory Nutt
|
6064bd08bf
|
SAMV7-XULT: Switch back to the CodeSourcery tools
|
2015-03-11 10:24:43 -06:00 |
|
Gregory Nutt
|
3e42f50373
|
SAMV71-XULT: Some bugfixes from early bring-up work
|
2015-03-10 16:11:28 -06:00 |
|
Gregory Nutt
|
8dc26a0dd9
|
Fix a case in mq_timedsend() where the return errno value was being overwritten
|
2015-03-10 12:05:33 -06:00 |
|
Gregory Nutt
|
c65c2a10b5
|
mq_timedsend(): Do check for time errors if the message queue is not full. Noted by Freddie Chopin
|
2015-03-10 09:42:35 -06:00 |
|
Gregory Nutt
|
95750df002
|
SAMV7: Update floating point and TCM configuration options. Update TODO list. Update comments. Refresh a configuration
|
2015-03-10 07:50:32 -06:00 |
|
Gregory Nutt
|
1e0bdf2bc9
|
Update README
|
2015-03-09 19:58:59 -06:00 |
|
Gregory Nutt
|
822d48b4fc
|
Cortex-M7: Add cache operations
|
2015-03-09 15:41:48 -06:00 |
|
Gregory Nutt
|
40f92938e3
|
SAMV71-XULT: Add support for on-board LEDs. Includes partial support for on-board buttons. Some corrections fo to egg-stk37000 and sam4e-ek discovered during leveraging. Add board READEM.txt file
|
2015-03-09 08:23:09 -06:00 |
|
Gregory Nutt
|
fb4324e6c5
|
SAMV7: Add serial driver
|
2015-03-08 10:15:42 -06:00 |
|
Gregory Nutt
|
c3a5c9e455
|
SAMV7-XULT: At 3.3V/300MHz, FLASH should require only 4 wait states
|
2015-03-08 08:41:35 -06:00 |
|
Gregory Nutt
|
ca03eb6299
|
SAMV71-XULT: Add heap allocation logic
|
2015-03-07 11:46:54 -06:00 |
|
Gregory Nutt
|
7d8a3ff0a9
|
SAMV7-XULT: Disable networking for now
|
2015-03-07 11:21:22 -06:00 |
|
Gregory Nutt
|
1f3934f10d
|
SAMV71-XULT: Switch to the devkitARM toolchain
|
2015-03-07 11:15:49 -06:00 |
|
Gregory Nutt
|
44648d4a97
|
SAMV7: Add basic clock and timer ISR configuration logic
|
2015-03-07 10:32:47 -06:00 |
|
Gregory Nutt
|
16b29c54a9
|
SAMV71-XULT: Add linker scripts
|
2015-03-06 12:46:12 -06:00 |
|
Gregory Nutt
|
7031eda378
|
SAMV71: More updates on the way to a clean build. Still more to do to complete that journey
|
2015-03-06 12:13:09 -06:00 |
|
Gregory Nutt
|
1619935500
|
Cortex-M7/SAMV71-XULT: Various fixes for building Cortex-M7 with SAMV71.
|
2015-03-06 10:53:57 -06:00 |
|
Gregory Nutt
|
f0864a1139
|
Add a bare bones framework that will do nothing more than support configuration for the Atmel SAMV71 Xplained Ultra board. Very much a work in progress.
|
2015-03-06 08:56:44 -06:00 |
|
Gregory Nutt
|
fe25353bc7
|
Refresh configuration
|
2015-03-06 08:26:01 -06:00 |
|
Gregory Nutt
|
3bfb9dcd0b
|
Refresh configuration
|
2015-03-05 11:25:10 -06:00 |
|
Gregory Nutt
|
53c710ae11
|
Add support for dumping board-specific information on assertion. From David Sidrane
|
2015-03-04 07:00:29 -06:00 |
|
Gregory Nutt
|
ca334eaccb
|
PIC32MX SPI: Fix typos in Kconfig; Move constant SPI config data to ROM-able const structure
|
2015-03-03 10:06:49 -06:00 |
|
Gregory Nutt
|
f4c9119aed
|
PIC32MZ: Default SPI configuration setting is backward; refresh configuration
|
2015-03-03 09:16:10 -06:00 |
|
Gregory Nutt
|
2ac70b053b
|
PIC32MZ Starter Kit: Add support for on-board buttons
|
2015-03-02 10:01:10 -06:00 |
|
Gregory Nutt
|
7621e9ed22
|
Update README
|
2015-03-01 10:52:44 -06:00 |
|
Gregory Nutt
|
9651b08383
|
Update README file
|
2015-03-01 09:44:44 -06:00 |
|
Gregory Nutt
|
97d1e9625b
|
PIC32MZ: Add ability to select flash ECC options
|
2015-03-01 09:08:44 -06:00 |
|
Gregory Nutt
|
f4daf5068e
|
Refreshed Spark Configurations
|
2015-02-28 15:44:58 -06:00 |
|
Gregory Nutt
|
91f9c285d8
|
PIC32MZ: Fix reserved RAM for MPLABX; Revert FPLLRNG calculation; Fix maximum DMTCNT value
|
2015-02-28 12:49:03 -06:00 |
|
Gregory Nutt
|
5d4cae2cd7
|
PIC32MZ: Fix some configuration settings and POSC mode should be external clock
|
2015-02-28 11:54:47 -06:00 |
|
Gregory Nutt
|
d19d394293
|
PIC32MZ: Add an option to use the MIPS32 or the microMIPS ISA
|
2015-02-28 08:22:37 -06:00 |
|
Gregory Nutt
|
453a4d2894
|
Rename all use of up_boardinitialize(). Should not use common microprocessing naming convention but rather the microprocessor-specific naming conventioni
|
2015-02-28 07:14:37 -06:00 |
|
Gregory Nutt
|
7583c94252
|
Move board_ prototypes from arch.h to board.h
|
2015-02-27 20:02:03 -06:00 |
|
Gregory Nutt
|
42327117a3
|
configs/: board function prototypes are now in include/nuttx/board.h. Remove from board header file; Add inclusion of nuttx/board.h to all files referencing board functions
|
2015-02-27 18:49:24 -06:00 |
|
Gregory Nutt
|
00a4b1f6d6
|
configs/: Remove prototypes of board_led* functions from all board header files
|
2015-02-27 17:32:01 -06:00 |
|
Gregory Nutt
|
6934085e22
|
PIC32MZ: Correct a few more DEVCFG issues
|
2015-02-27 16:20:28 -06:00 |
|
Gregory Nutt
|
d4fe586d42
|
Minor correction to toolchain path, comments
|
2015-02-27 13:14:41 -06:00 |
|
Gregory Nutt
|
9beda0ca40
|
PIC32MZ: Review DEVCFG setting; adjust a few to match example code
|
2015-02-27 10:54:18 -06:00 |
|
Gregory Nutt
|
c45d42a253
|
PIC32MZ: Add logic to configure peripheral pins for the selecte UARTs
|
2015-02-26 15:05:11 -06:00 |
|
Gregory Nutt
|
b583e40c06
|
Adjust microMIPS compile options to enable interlinking with 32-bit code
|
2015-02-25 09:54:48 -06:00 |
|
Gregory Nutt
|
b14da4b621
|
Refresh configuration
|
2015-02-25 07:22:58 -06:00 |
|
Gregory Nutt
|
c461f7fe54
|
PIC32MZ: Add support for a timer interrupt
|
2015-02-24 15:36:08 -06:00 |
|
Gregory Nutt
|
9ccc28b4d2
|
PIC32MZ: Add Oscillator header file; Add logic to set up peripheral clocks on reset
|
2015-02-24 11:16:32 -06:00 |
|
Gregory Nutt
|
b6fafcf198
|
Merge commit '45e0cf1f4a7664974933db2a408ccea6acad4eff'
|
2015-02-24 07:13:48 -06:00 |
|
sauttefk
|
4f3f4233ab
|
EK-TM4C1294XL Launchpad has no SD-card socket
|
2015-02-24 03:29:02 +01:00 |
|
Gregory Nutt
|
f7651a5c6e
|
PIC32MZ: Fix some PLL setup logic
|
2015-02-23 17:27:28 -06:00 |
|
Gregory Nutt
|
40f40dad5a
|
PIC32MZ: Most related to start up file a FLASH device configuration setup
|
2015-02-23 16:36:35 -06:00 |
|
Gregory Nutt
|
c1da98fb57
|
PIC32MZ: Make sure that the microMIPS ISA is selected on all common MIPS32 assembly files when the PIC21MZ is selected
|
2015-02-23 12:09:34 -06:00 |
|
Gregory Nutt
|
565610caea
|
MIPS: Add some build support for the M14K and also for the PIC32MZ Starter Kit. Still a long way to go
|
2015-02-22 13:45:59 -06:00 |
|
Gregory Nutt
|
cc182fc1b8
|
Remove support for obsolete PIC32 toolchain configuration names
|
2015-02-22 12:14:20 -06:00 |
|
Gregory Nutt
|
ec5caaa14a
|
PIC32MZ: Add just enough PIC32MZ logic that we can run 'make menuconfig'
|
2015-02-22 10:53:24 -06:00 |
|
Gregory Nutt
|
367c3acdc5
|
Add basic board support for the PIC32MZ (can't build yet of course because there is not yet any PIC32MZ support)
|
2015-02-22 08:47:09 -06:00 |
|
Gregory Nutt
|
bd2c5bba3b
|
Add path for Pinguino tools. Need to be careful because bin directory has an incompatible make.exe in it
|
2015-02-21 19:42:46 -06:00 |
|
Gregory Nutt
|
31beaf3fbf
|
pic32mx-starterkit: Move scripts to common directory. Pinguino build needs to use a different linker script
|
2015-02-21 19:40:50 -06:00 |
|
Gregory Nutt
|
2a5c0b10ce
|
pic32mx-starterkit: Move scripts to common directory. Pinguino build needs to use a different linker script
|
2015-02-21 19:40:22 -06:00 |
|
Gregory Nutt
|
4e123c3b40
|
Refresh configurations
|
2015-02-21 19:38:56 -06:00 |
|
Gregory Nutt
|
de4666e49d
|
Rename pic32-starterkit to pic32mx-starterkit to make room in the namespace for the pic32mz-starterkit
|
2015-02-21 18:41:17 -06:00 |
|
Gregory Nutt
|
738cd4163d
|
tm4c123g-launchpad: Add board button interrupt logic. From Calvin Maguranis
|
2015-02-20 12:32:39 -06:00 |
|
Gregory Nutt
|
abe4253a8d
|
tm4c123g-launchad: Add ADC support. From Calvin Maguranis.
|
2015-02-17 13:52:17 -06:00 |
|
Gregory Nutt
|
1e6358d20e
|
NSH: The default priority of the network initialization thread should be lower. It is CPU intensive and can interfere with other operations
|
2015-02-17 13:14:50 -06:00 |
|
Gregory Nutt
|
d5dd1e383d
|
Add support for RTC driver to the STM32F4-Discovery board
|
2015-02-15 10:11:01 -06:00 |
|
Gregory Nutt
|
aaabd05bfc
|
RTC: Remove all backdoor interfaces from rtc.h
|
2015-02-13 08:41:34 -06:00 |
|
Gregory Nutt
|
7547468e47
|
Cosmetic updates to comments
|
2015-02-12 13:44:22 -06:00 |
|
Gregory Nutt
|
c60e615315
|
Renamed SPIDEV_GSENSOR to SPIDEV_ACCELEROMETER just because it looks better beside SPIDEV_BAROMETER
|
2015-02-12 12:26:19 -06:00 |
|
Gregory Nutt
|
5e3f10a6c6
|
Update ChangeLog
|
2015-02-12 12:21:05 -06:00 |
|
Gregory Nutt
|
317dc642e4
|
Viewtool STM32F107: Add support for an optional, add-on Freescale MPL115A baramoter. From Alan Carvalho de Assis
|
2015-02-12 12:08:06 -06:00 |
|
Gregory Nutt
|
5de459efcb
|
More updates to README files
|
2015-02-12 09:06:35 -06:00 |
|
Gregory Nutt
|
9eb91fcf59
|
Updated README files
|
2015-02-12 07:29:11 -06:00 |
|
Gregory Nutt
|
2706829723
|
Purely costmetic updates
|
2015-02-12 07:05:28 -06:00 |
|
Gregory Nutt
|
2a20846e6f
|
The TM4C1294 Launchpad has no on-board TMP100 temperature sensor
|
2015-02-12 06:49:11 -06:00 |
|
Gregory Nutt
|
4027f10c6a
|
Refresh configurations
|
2015-02-12 06:48:18 -06:00 |
|
Gregory Nutt
|
7a9720e60c
|
Review/update of the TM4C1294 Launchpad code
|
2015-02-11 18:27:38 -06:00 |
|
Gregory Nutt
|
31e9cd3b20
|
Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6'
|
2015-02-11 18:07:03 -06:00 |
|
sauttefk
|
a1b5538740
|
Add TI EK-TM4C1294XL launchpad support
|
2015-02-12 00:30:38 +01:00 |
|
Gregory Nutt
|
64cc006d0c
|
Add support for Freedom KL26Z board. From Derek B. NoonBurg
|
2015-02-11 07:18:06 -06:00 |
|
Gregory Nutt
|
49e050f698
|
LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug.
|
2015-02-10 14:04:08 -06:00 |
|
Gregory Nutt
|
9a621066de
|
SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing.
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
|
2015-02-10 11:10:55 -06:00 |
|
Gregory Nutt
|
2c82dd2afb
|
Refresh configurations
|
2015-02-10 08:48:02 -06:00 |
|
Gregory Nutt
|
528f959034
|
Refresh configuration
|
2015-02-10 06:28:41 -06:00 |
|
Gregory Nutt
|
e20e743472
|
Refresh Configuration
|
2015-02-09 18:24:11 -06:00 |
|
Gregory Nutt
|
44f09a084c
|
SAMA5D4-EK: CONFIG_NET_NOINTS is now enabled in the nsh and ipv6 configurations.
|
2015-02-09 15:27:14 -06:00 |
|
Gregory Nutt
|
62666a030b
|
SAMA5D4-EK: Add a configuration for testing IPv6
|
2015-02-09 10:51:05 -06:00 |
|
Gregory Nutt
|
e8b4f474d3
|
Convert all STM32F4-Discovery configurations (with base board) to configure the Ethernet driver to use the work queue (vs. interrupt level processing).
|
2015-02-09 08:34:52 -06:00 |
|
Gregory Nutt
|
f33a9f0626
|
Correct a attribution in a comment
|
2015-02-09 07:27:43 -06:00 |
|
Gregory Nutt
|
e9e9892646
|
Updated Tiva ADC files
|
2015-02-06 16:56:12 -06:00 |
|
Gregory Nutt
|
58d79e93d9
|
Forgot to add file in previous commit
|
2015-02-05 18:01:46 -06:00 |
|
Gregory Nutt
|
7442459895
|
tmv4c123g-launchpad: Add Tiva ADC support to the TM4C123G-Launchpad. From Calvin Maguranis.
|
2015-02-05 17:58:17 -06:00 |
|
Gregory Nutt
|
d43b3de28d
|
nuttx/configs/tm4c123g-launchpad/src/Makefile
|
2015-02-05 17:57:31 -06:00 |
|
Gregory Nutt
|
31d4ab1902
|
Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis
|
2015-02-05 13:51:32 -06:00 |
|
Gregory Nutt
|
357ee0a3f0
|
Update README files
|
2015-02-05 12:07:21 -06:00 |
|
Gregory Nutt
|
0cab41e36f
|
Update README
|
2015-02-05 11:23:55 -06:00 |
|
Gregory Nutt
|
07d232b84a
|
STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6.
|
2015-02-05 11:21:04 -06:00 |
|
Gregory Nutt
|
45cadc9e0b
|
Fix an error in IPv6 netmask caused by a bad range in the Kconfig file
|
2015-02-05 10:50:25 -06:00 |
|
Gregory Nutt
|
17366dcbb1
|
Refresh configuration
|
2015-02-05 10:07:31 -06:00 |
|
Gregory Nutt
|
8a5d6fc78e
|
Networking: Add support for sending ICMPv6 Router Solicitation and receiving Router advertisement. This is a part of the ICMPv6 auto-configuration logic is still still not complete
|
2015-02-03 13:25:28 -06:00 |
|
Gregory Nutt
|
573ffe4221
|
Restore 20Msec default
|
2015-02-02 14:59:49 -06:00 |
|
Gregory Nutt
|
8592ce93af
|
Auto neighbor solicitation is no longer EXPERIMENTAL and is the default for the DK-TM4C129X/ipv6 configuration
|
2015-02-02 14:09:06 -06:00 |
|
Gregory Nutt
|
a2a2f2d003
|
ICMPv6: Adds basic logic to support verification that we have the IPv6 address in the Neighbor Table. This feature is important because otherwise the first packet sent to a remote peer will fail (it will be replaced with a Neighbor Solicitation).
|
2015-02-02 13:44:31 -06:00 |
|
Gregory Nutt
|
f3ed2e36ec
|
Cosmetic update to a few comments
|
2015-02-01 12:23:57 -06:00 |
|
Gregory Nutt
|
962cec440d
|
Refresh some configurations
|
2015-02-01 12:15:46 -06:00 |
|
Gregory Nutt
|
6867a78bce
|
Fix compile issues with configs/sim/nettest
|
2015-02-01 12:00:30 -06:00 |
|
jeditekunum
|
a74435385f
|
Obviously can't use LOWCONSOLE with nsh.
|
2015-02-01 09:21:51 -06:00 |
|
Gregory Nutt
|
7e0bf3da9d
|
drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters.
|
2015-02-01 07:24:16 -06:00 |
|
Gregory Nutt
|
533707f5f4
|
Moteino Mego: Move linker scripts to scripts/ directory as with other configurations
|
2015-02-01 06:44:26 -06:00 |
|
Gregory Nutt
|
723e0e2ecb
|
Moteino Mega: Rename files to conform to newer standards. Need to fix all of the old configurations someday
|
2015-01-31 14:15:13 -06:00 |
|
Gregory Nutt
|
2720144586
|
Review/modifications for change of last merge
|
2015-01-31 14:10:53 -06:00 |
|
Gregory Nutt
|
8944a041fd
|
Merge commit '1207647ee19ac48746300f2d3fa8f4679c32de95'
|
2015-01-31 13:47:10 -06:00 |
|
jeditekunum
|
ca7ecf658f
|
Update README for MoteinoMEGA (ATMEGA1284P) port.
|
2015-01-31 13:32:31 -06:00 |
|
jeditekunum
|
cd2be452ee
|
Complete initial port.
|
2015-01-31 11:59:39 -06:00 |
|
Gregory Nutt
|
00a561126d
|
Unix domain: Add options to build in stream or datagram support separately
|
2015-01-31 07:58:51 -06:00 |
|
Gregory Nutt
|
94d18aedf4
|
apps/ustream and udgram: Change default FIFO path to /dev/fifo
|
2015-01-30 09:07:22 -06:00 |
|
Gregory Nutt
|
290e7465c3
|
Update configuration
|
2015-01-29 16:30:43 -06:00 |
|
Gregory Nutt
|
626d2257b8
|
Update ChangeLog
|
2015-01-29 11:48:46 -06:00 |
|
Gregory Nutt
|
ce67047a79
|
update configuration
|
2015-01-29 09:33:24 -06:00 |
|
Gregory Nutt
|
bfa58153ec
|
Minor fixes after initial tests with apps/examples/udgram
|
2015-01-28 15:27:54 -06:00 |
|