Paul A. Patience
|
89da1f27dd
|
STM32: Fix typos in pinmaps
|
2015-12-14 09:41:49 -05:00 |
|
Gregory Nutt
|
cd8d37f46b
|
Eliminate a warning
|
2015-12-12 11:37:25 -06:00 |
|
Gregory Nutt
|
412c7c83a1
|
Forgot to add a file in the last commit
|
2015-12-12 09:37:01 -06:00 |
|
Gregory Nutt
|
daea1e614b
|
All architectures need to build ELF support if either CONFIG_ELF or CONFIG_MODULE are selected. Cortex-M7 also must support module cache corherence
|
2015-12-12 09:35:05 -06:00 |
|
Gregory Nutt
|
ead6656a35
|
SAMV7 USBHS device: Beef up test for data sent in DMA complete interrupt handler
|
2015-12-11 08:28:49 -06:00 |
|
Gregory Nutt
|
cb5c221ce7
|
Update a few comments
|
2015-12-10 06:32:27 -06:00 |
|
Gregory Nutt
|
a0594ec60e
|
SAMV7 USBHS device: Last change fixed certain problems and introduced some new ones. Here is an untested fix to address all known problems
|
2015-12-09 14:19:14 -06:00 |
|
Gregory Nutt
|
c26a624a9f
|
SAMA5: Backport some USB device ZLP logic from the SAMV7
|
2015-12-08 17:36:46 -06:00 |
|
Gregory Nutt
|
9135afa8c1
|
SAMV7 USBHS device: End of DMA is too soon to process ZLP. Wait for TXINI
|
2015-12-08 13:21:43 -06:00 |
|
Gregory Nutt
|
cd7c22bbd4
|
SAMV7: Trivial correcto to last USBHS device change when using huge request buffers
|
2015-12-08 11:10:16 -06:00 |
|
Gregory Nutt
|
19520b5c2c
|
SAMV7 USBHS device: Fix check if zero lenght packet is needed
|
2015-12-08 10:11:44 -06:00 |
|
Gregory Nutt
|
927b1dcc1f
|
Initialize the telnet factory as part of the common architecture intialization
|
2015-12-07 11:40:29 -06:00 |
|
Gregory Nutt
|
8df99623aa
|
SAMV7: For to add RSWDT driver before committing
|
2015-12-06 16:41:10 -06:00 |
|
Gregory Nutt
|
6a9876f960
|
SAMV7: Add an untested RSWDT driver
|
2015-12-06 09:56:45 -06:00 |
|
Gregory Nutt
|
8f55ec5c69
|
SAMV7: Port the WDT driver from the SAMA5 to the SAMV7
|
2015-12-06 09:29:51 -06:00 |
|
Gregory Nutt
|
347bb86045
|
SAMV7: Port SAMAD5 TRNG driver to the SAMV7
|
2015-12-06 08:53:31 -06:00 |
|
Gregory Nutt
|
3afc0799ad
|
Eliminate a warning
|
2015-12-05 10:35:11 -06:00 |
|
Gregory Nutt
|
52601d9da8
|
SAMV7: Add support for PCK6 as a timer/counter clock source
|
2015-12-04 10:49:20 -06:00 |
|
Gregory Nutt
|
9d769f6056
|
SAMV7: Extend programmable clock support for queries about the PCK configuration
|
2015-12-03 14:11:39 -06:00 |
|
Gregory Nutt
|
8c4302f75d
|
Bring programmable clock logic from SAMA5 to SAMV7
|
2015-12-03 10:22:11 -06:00 |
|
Gregory Nutt
|
1399e00166
|
SAMV7: Fix some issues with lost timer/counter interrupts
|
2015-12-02 18:09:23 -06:00 |
|
Gregory Nutt
|
2300273a07
|
SAMV7 TC: Some trivial improvements
|
2015-12-02 15:53:51 -06:00 |
|
Gregory Nutt
|
9a54702d99
|
SAMV7: Revise timer driver. SAMA5 has one pid/interrupt per timer/counter; SAMV7 has a pid/interrupt per channel
|
2015-12-02 14:09:34 -06:00 |
|
Gregory Nutt
|
192772b7ee
|
SAMV7: Add support for CONFIG_SCHED_TICKLESS_LIMIT_MAX_SLEEP
|
2015-12-02 09:21:34 -06:00 |
|
Gregory Nutt
|
3ce3dbc6ed
|
SAMV7: Ported tickless logic from the SAMA5/SAM4CM to the SAMV7
|
2015-12-02 08:26:33 -06:00 |
|
Gregory Nutt
|
02c57c22f8
|
SAMA5: Misc clean from review while porting some logic to the SAMV7
|
2015-12-02 08:25:23 -06:00 |
|
Gregory Nutt
|
bda05b312e
|
SAMV7: Port the SAMA5 timer/counter driver to the SAMV7
|
2015-12-02 07:18:25 -06:00 |
|
Gregory Nutt
|
975ea3e677
|
SAMA5: Fix a typo in timer/counter setup
|
2015-12-02 07:17:17 -06:00 |
|
Gregory Nutt
|
6734c91a05
|
SAMV7 USB: Add some warnings to avoid certain bad configuration selections
|
2015-12-02 05:30:10 -06:00 |
|
Gregory Nutt
|
754aace61b
|
STM32: CCM procfs more typos
|
2015-12-01 16:28:14 -06:00 |
|
Gregory Nutt
|
bc74aa322b
|
STM32: Fix a couple of typos in STM32 CCM procfs
|
2015-12-01 16:20:51 -06:00 |
|
Gregory Nutt
|
1f82dda9d8
|
Clean up some naming
|
2015-12-01 15:04:12 -06:00 |
|
Gregory Nutt
|
548ba1640f
|
STM32: CCM procfs is no longer a part of the 'base' procfs entries and can now only be supported via run time registration with CONFIG_FS_PROCFS_REGISTER=y
|
2015-12-01 14:55:05 -06:00 |
|
Gregory Nutt
|
7037f13c2d
|
Trivial cosmetic change from review
|
2015-11-30 18:01:26 -06:00 |
|
Gregory Nutt
|
b5ca03b4cd
|
Merged in wail007/arch (pull request #36)
Change prescaler dynamically to support bigger periods on 16 bits timers
|
2015-11-30 17:58:13 -06:00 |
|
Wail Khemir
|
fd8db7ad38
|
Change prescaler dynamically to support bigger periods on 16 bits timers
|
2015-11-30 18:52:05 -05:00 |
|
Wail Khemir
|
27bbb33176
|
Merged nuttx/arch into master
|
2015-11-30 18:44:47 -05:00 |
|
Gregory Nutt
|
5367c5993c
|
SAMV7: Add some conditional logic to handle the case where the board has no 32.768KHz crystal installed
|
2015-11-30 15:21:25 -06:00 |
|
Gregory Nutt
|
e421258808
|
Move sim/src/up_appinit.c to configs/sim/src where it really belongs
|
2015-11-29 13:54:03 -06:00 |
|
Gregory Nutt
|
4d2299896e
|
SAMV7: Add support to network device statistics to the Ethernet driver
|
2015-11-27 12:30:15 -06:00 |
|
Gregory Nutt
|
8ce454a584
|
Remove some warnings; eliminate unused variables
|
2015-11-26 12:46:53 -06:00 |
|
Gregory Nutt
|
e5e631e57f
|
include/nuttx/net/netdev.h and several Ethernet drivers in arch/: Most network drivers to not support statistics. Those that do only support them when DEBUG is enabled. Each driver collects an architecture specific set of statistics and there is no mechanism in place to view those statistics. Thus, the driver feature was mostly useless. This change standardizes the driver statistics and puts the definition in the common network device structure defined in netdev.h where they can be accessed by network applications. All Ethernet drivers that collect statistics have been adapted to use these common statistics.
|
2015-11-26 12:07:18 -06:00 |
|
Gregory Nutt
|
2afd4595e4
|
Re-think how __KERNEL__ option is set in architecture Makefiles. Should be passed in EXTRADEFINES
|
2015-11-26 06:59:35 -06:00 |
|
Gregory Nutt
|
22b4932a4f
|
__KERNEL__ should be defined when compiler architecture specific logic
|
2015-11-25 18:06:56 -06:00 |
|
Gregory Nutt
|
4aa3dcb51a
|
__KERNEL__ should be defined when compiler architecture specific logic
|
2015-11-25 18:05:36 -06:00 |
|
Gregory Nutt
|
f4e8f84887
|
__KERNEL__ should be defined when compiler architecture specific logic
|
2015-11-25 17:52:14 -06:00 |
|
Gregory Nutt
|
14d7ede265
|
All instances of up_initialize() should call loop_register() is CONFIG_DEV_LOOP=y
|
2015-11-25 17:10:41 -06:00 |
|
Gregory Nutt
|
b1e17d8892
|
Fix some conditional compilation. CONFIG_LIBC_LOCALTIME should be checked in most of the same places wehre CONFIG_TIME_EXTENDED is checked
|
2015-11-25 12:51:07 -06:00 |
|
Ken Pettit
|
641ca79321
|
arch/sim/src: Add a special file system for use with simulator that supports access to the host file system from the simulation. From Ken Petit
|
2015-11-25 08:36:44 -06:00 |
|
Gregory Nutt
|
d7c5ff98f4
|
Fix a typo
|
2015-11-23 18:55:38 +00:00 |
|