Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Unbinding `ff_currentcluster` and `f_pos`:
1. Added `ff_pos` in `struct fat_file_s`.
2. Added function `fat_zero_cluster` for doing zeroing for gap
between EOF and new position beyond EOF.
3. Added function `fat_get_sectors` for getting the sector where
`f_pos` is located, allocting new cluster when `f_pos` is beyond
EOF.
4. Modify function `fat_read`, and `fat_write` with above functions.
5. Remove redundant logics in `fat_seek` since now new cluster is
allocated when writing instead of seeking.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
When issuing an ioctl for a file that exists in a FAT32 file system,
the FAT ioctl() is first executed, but it returns -ENOSYS in
an attempt to pass through to the vfs.
Therefore, the ioctl of the VFS layer, which expects -ENOTTY,
is not processed and an error occurs.
Signed-off-by: Takeyoshi Kikuchi <kikuchi@centurysys.co.jp>
Fix the issue where fat driver is not using the last two clusters in
the file system.
The fat parameter fs->fs_nclusters is the maximum number of data clusters;
this doesn't include the two in the beginning. Many checks in the fat driver
treat the fs->fs_nclusters-1 as being the last accessible cluster, which is not
right, the last accessible one is actually this number + 2 when the cluster
count includes the two first ones.
Normally this is not an issue when writes are being done through the same
driver, the last two clusters are just never used. But if the filesystem is
modified by external driver, for example with a populated fat created with PC,
or modifying the FS via USB-MSC, this leads to the fat driver not being able to
read anything that uses the last two clusters.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Testing for overflow by adding a value to a variable to see if it "wraps
around" works only for unsigned integer values, because signed overflow
has undefined behavior according to the C and C++ standards.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
and implement all status related change function. the individual
file system change will provide in other upcoming patchset.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8fde9db8eba9586e9c8da078b67e020c26623cf4
Note: all attributes is guarded by PSEUDOFS_ATTRIBUTES to save the space
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I664d60382e356068fd920f08aca5b4a49d8d92a9
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
I see the following behaviour on NuttX 7.26, where I have SD card mounted on /flash and a directory called "frm" on it:
opendir("/flash") returns (DIR *) 0x1000c580
opendir("/flash/") returns (DIR *) 0x1000c5d0
opendir("/flash/frm") returns (DIR *) 0x1000c620
opendir("/flash/frm/") returns (DIR *) 0x0
From POSIX specs for opendir(): "A pathname ... that ends with one or more trailing slashes shall be resolved as if a single dot character ( '.' ) were appended to the pathname."
So for mount points, opendir() works correctly, but for FAT32 filesystem it fails to open directory if the path has a trailing slash. I'm not quite sure how to cleanly fix this. Stripping the trailing slash in opendir() would require allocating a separate buffer, while fixing it in the FAT32 code seems somewhat complex due to the short/long filename logic.
It is not a big issue for me, I'm just going to fix it on the application side. But still a small portability and standards compliance issue.
NOTE: You would not see this problem if you call opendir() indirectly in NSH (like 'ls -R /') because NSH contains logic to remove trailing '/' characters from paths.
FAT. Effectively handles the situation when a new file position is within the current sector.
* Find begin of the next token
* EOL
* revert
* Accelerates the work of the FS with a multitude of operations to write small pieces of data within the current sector.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Squashed commit of the following:
fs/fat: Resolves issues with truncating the cluster chain when shrinking files via ftruncate().
fs/fat: First cut at implementation file shrinkage logic needed to support ftruncate(). Certainly shrinks the file size but it does not appear to correctly disconnect the cluster chains.
fs/fat: Restructure some functions in files to better support forthcoming file shrinkage logic. Put framework for file shrinkage in place. That logic is incomplete on initial commit.
fs/nxffs: Add partial implementation of the truncate method: It extend files, but cannot yet shrink them.
fs/smartfs: Add partial implementation of the truncate method: It extend files, but cannot yet shrink them.
fs/fat: Add partial implementation of the truncate method: It extend files, but no yet shrink them.
fs/nfs: Add support for the truncate method to the NFS file system.
fs: Add truncate() support for userfs
fs/unionfs: Add truncate() support to the unionfs
fs/tmpfs: Add ftruncate() support to tmpfs
syscall/: Add system call support for ftruncate()
net/route: Adding ftruncate() support eliminates an issue in file-based routing table management.
fs: Add basic framework to support truncate() and ftruncate(). The infrastructure is complete. Now, however, the actual implementation of ftruncate() will have to be done for each file system.
sched/semaphore: Add nxsem_post() which is identical to sem_post() except that it never modifies the errno variable. Changed all references to sem_post in the OS to nxsem_post().
sched/semaphore: Add nxsem_destroy() which is identical to sem_destroy() except that it never modifies the errno variable. Changed all references to sem_destroy() in the OS to nxsem_destroy().
libc/semaphore and sched/semaphore: Add nxsem_getprotocol() and nxsem_setprotocola which are identical to sem_getprotocol() and set_setprotocol() except that they never modifies the errno variable. Changed all references to sem_setprotocol in the OS to nxsem_setprotocol(). sem_getprotocol() was not used in the OS
libc/semaphore: Add nxsem_getvalue() which is identical to sem_getvalue() except that it never modifies the errno variable. Changed all references to sem_getvalue in the OS to nxsem_getvalue().
sched/semaphore: Rename all internal private functions from sem_xyz to nxsem_xyz. The sem_ prefix is (will be) reserved only for the application semaphore interfaces.
libc/semaphore: Add nxsem_init() which is identical to sem_init() except that it never modifies the errno variable. Changed all references to sem_init in the OS to nxsem_init().
sched/semaphore: Rename sem_tickwait() to nxsem_tickwait() so that it is clear this is an internal OS function.
sched/semaphoate: Rename sem_reset() to nxsem_reset() so that it is clear this is an internal OS function.
