Gregory Nutt
|
bcf9bc0f41
|
Fix STM32L-Discovery clock setup - The X3 crystal is not fitted on the board
|
2013-05-20 12:17:34 -06:00 |
|
Gregory Nutt
|
55b2ed4485
|
Misc updates to STL32L15X logic
|
2013-05-20 10:08:44 -06:00 |
|
Gregory Nutt
|
d7f6cbf4fd
|
Add STM32L152X RCC PLL and FLASH support. Now compiles errorfree.
|
2013-05-19 14:35:30 -06:00 |
|
Gregory Nutt
|
3db251c13f
|
STM32L15X UART, DMA, and heap initialization support
|
2013-05-19 11:54:56 -06:00 |
|
Gregory Nutt
|
4124f55382
|
Add SYSCFG definitions for STM32L152; Add board support STM32L-Discovery
|
2013-05-19 11:04:19 -06:00 |
|
Gregory Nutt
|
0ccea89f32
|
Add PWR and RCC register definitions for the STM32F152
|
2013-05-19 08:55:36 -06:00 |
|
Gregory Nutt
|
a7846ae2c4
|
Add STM32L15X memory map
|
2013-05-18 16:08:28 -06:00 |
|
Gregory Nutt
|
863b6b7b83
|
Add support for STM32L15X GPIOs
|
2013-05-18 15:32:50 -06:00 |
|
Gregory Nutt
|
d32417043f
|
Support for STM32L15xx interrupt vectors
|
2013-05-18 12:56:03 -06:00 |
|
Gregory Nutt
|
3eae56467b
|
Begnning of support for the STM32L15X family
|
2013-05-18 11:15:37 -06:00 |
|
Gregory Nutt
|
6a7e1ba3ef
|
Fix STM32 F1 DMA register definitions. From Laurent Latil.
|
2013-05-15 16:11:16 -06:00 |
|
Gregory Nutt
|
ed99b6f622
|
Clean up of pirelli-dpl10/nsh_highram configuration
|
2013-05-15 08:29:04 -06:00 |
|
Gregory Nutt
|
98787f4717
|
Various changes and bigfixes for problems detected by CppCheck
|
2013-05-09 14:23:34 -06:00 |
|
Gregory Nutt
|
cb5fa55663
|
Fix typo is STM32 ADC driver for F2 and F4: ADC not ACD
|
2013-05-08 21:45:46 -06:00 |
|
Gregory Nutt
|
f97d98825f
|
Fix for lpc17xx i2c single byte read timeout error problem from M.Kannan
|
2013-05-08 06:57:55 -06:00 |
|
Gregory Nutt
|
6caf285234
|
STM32 option to disable sleep to prevent disconnection of debugger
|
2013-05-07 14:10:34 -06:00 |
|
Gregory Nutt
|
78bc31f884
|
The Kinetis GPIO logic had some of the same issues as did the Kinetis L
|
2013-05-06 11:49:28 -06:00 |
|
Gregory Nutt
|
c6009fa2a4
|
Fixes LEDs on the Freedom KL25Z board
|
2013-05-06 11:07:53 -06:00 |
|
Gregory Nutt
|
aa72f58914
|
Convert configs/pirelli_dpl10/nsh_highram to use the kconfig-frontends tools
|
2013-05-05 10:38:02 -06:00 |
|
Gregory Nutt
|
bf21a8f790
|
Make Pirelli-DLP10 a true board configuration; Calypso no compiles without errors
|
2013-05-05 09:10:47 -06:00 |
|
Gregory Nutt
|
ec84669a94
|
Repartitioning of header files for Kinetis L
|
2013-05-02 09:24:36 -06:00 |
|
Gregory Nutt
|
fb4daa533a
|
Changes to remove some warning sduring compilation for ZKit-arm-1769 Board.
|
2013-05-02 06:28:59 -06:00 |
|
Gregory Nutt
|
bd953b4919
|
Freedom KL25Z pin mux'ing fixes from Alan Carvalho de Assis
|
2013-05-02 06:08:50 -06:00 |
|
Gregory Nutt
|
180189050b
|
Misc changes for clean built od mikroe-stm32f4 configurations
|
2013-05-01 09:21:13 -06:00 |
|
Gregory Nutt
|
efbe6f2b07
|
Add configuration and example to test MTD partitions
|
2013-04-30 15:54:02 -06:00 |
|
Gregory Nutt
|
d7b031684b
|
LPC17: Interrupts not being re-enabled in the initialization function
|
2013-04-30 08:08:02 -06:00 |
|
Gregory Nutt
|
dd556fbded
|
Useless TIOCSERGSTRUCT logic in most serial drivers is not compiled unless CONFIG_DEBUG and CONFIG_SERIAL_TIOCSERGSTRUCT are defined
|
2013-04-25 15:52:48 -06:00 |
|
Gregory Nutt
|
8c4e03bba9
|
Various Kconfig files still have references to CONFIG_ variables. Some in harmless comments, some in config definionts which is not harmless. All removed
|
2013-04-25 15:52:00 -06:00 |
|
Gregory Nutt
|
3aa94411be
|
Remove up_assert_code
|
2013-04-25 15:19:59 -06:00 |
|
Gregory Nutt
|
4bce3b097d
|
KL15Z: Fix GPIO base addresses; remove GCR header file
|
2013-04-25 12:24:11 -06:00 |
|
Gregory Nutt
|
dfb5ab1eab
|
KL25Z typos: AIPS, not APS or AIP
|
2013-04-25 11:10:58 -06:00 |
|
Gregory Nutt
|
29c4896789
|
KL25Z: No Ethernet, no SDHC. TPM instead of FTM
|
2013-04-25 10:35:18 -06:00 |
|
Gregory Nutt
|
88be5781b5
|
KL25Z: Fix serial driver; freedom-kl25z/nsh configuration now works
|
2013-04-25 10:23:47 -06:00 |
|
Gregory Nutt
|
5cd86229a8
|
KL25Z: Fix some memory mapp and register definitions; no UART3-5
|
2013-04-25 09:06:58 -06:00 |
|
Gregory Nutt
|
525f7dd7c9
|
Fix KL25Z clock definitions in board.h
|
2013-04-24 18:29:26 -06:00 |
|
Gregory Nutt
|
7248a3cde4
|
Minor Freedom-KL25Z updates
|
2013-04-24 16:46:38 -06:00 |
|
Gregory Nutt
|
91e6580aff
|
Adding missing registration of /dev/zero; Condition registration of /dev/null. From Ken Petit
|
2013-04-24 07:17:49 -06:00 |
|
Gregory Nutt
|
007fdfedf6
|
Correction to ARM RAM vectors logic from Paul Y. Zhang
|
2013-04-23 09:32:11 -06:00 |
|
Gregory Nutt
|
a3efe72f78
|
LPC17xx ADC: Configure all ADC pins in the set, not just one. From MKannan
|
2013-04-23 08:47:21 -06:00 |
|
Gregory Nutt
|
803a860d34
|
New Kconfig convention: Extra indentation in comments will render as HTML preformatted text
|
2013-04-22 09:10:58 -06:00 |
|
Gregory Nutt
|
65fec0683a
|
_exit() should not call atexit() or on_exit() functions; Rename task_deletecurrent() to task_exit()
|
2013-04-18 16:15:20 -06:00 |
|
Gregory Nutt
|
6ca820fa1e
|
Cosmetic updates
|
2013-04-18 11:38:51 -06:00 |
|
Gregory Nutt
|
e32eaec34a
|
Fix typo in the STM32 F IRQ file -- from Paul Zhang
|
2013-04-17 20:27:43 -06:00 |
|
Gregory Nutt
|
4f91bbbc4c
|
cosmetic change to kl_clockconfig
|
2013-04-17 20:25:33 -06:00 |
|
Gregory Nutt
|
0f8a9064cb
|
Fix Freedom KL25Z SysTick rate
|
2013-04-17 12:44:13 -06:00 |
|
Gregory Nutt
|
d2b162bb5c
|
Update authorship
|
2013-04-17 07:39:32 -06:00 |
|
Gregory Nutt
|
6f6c6e3a55
|
Addition cleanup after last switch from BASEPRI to PRIMASK for Cortex-M0
|
2013-04-16 18:29:01 -06:00 |
|
Gregory Nutt
|
a8004f9e07
|
Fix major misthink in Cortex-M0 port: The Cortex-M0 has no BASEPRI register. We have to revert to using the nasty PRIMASK register
|
2013-04-16 18:00:59 -06:00 |
|
Gregory Nutt
|
9da8869efc
|
Fix KL25Z interrupt enable/disable logic
|
2013-04-16 14:54:08 -06:00 |
|
Gregory Nutt
|
a72a715cfb
|
Some clocking fixes for the Freedom KL25Z
|
2013-04-16 14:06:16 -06:00 |
|