Gregory Nutt
|
1c4d0686c8
|
LPC43xx: Fill out some missing GPIO interrupt logic
|
2016-06-04 16:05:36 -06:00 |
|
Gregory Nutt
|
6b84637a5b
|
Update some comments
|
2016-06-04 13:04:13 -06:00 |
|
Gregory Nutt
|
4965d0dc99
|
KL and LPC11: Perform similar name change as for STM32: xyz_lowputc -> up_putc
|
2016-06-04 11:29:27 -06:00 |
|
Gregory Nutt
|
184ca294e8
|
Rename all references to up_lowgetc
|
2016-06-04 07:59:02 -06:00 |
|
Gregory Nutt
|
ed1535f188
|
Changes from review of last PR
|
2016-06-04 07:52:56 -06:00 |
|
Gregory Nutt
|
8126a3d37d
|
Merged in v01d/nuttx/lpc43-gpio-fixes (pull request #38)
lpc43 GPIO Interrupts enabled and fixed (not all cases tested)
|
2016-06-04 07:46:04 -06:00 |
|
Alan Carvalho de Assis
|
76a899f9eb
|
STM32F103 Minimum: Add minnsh configuration
|
2016-06-04 07:36:04 -06:00 |
|
Alan Carvalho de Assis
|
86cfcfd58a
|
Add the up_getc() function to STM32 in order to support the minnsh configuration.
|
2016-06-04 07:22:45 -06:00 |
|
Gregory Nutt
|
37e8536a88
|
STM32: Put timer selections in a separate menu
|
2016-06-04 07:11:05 -06:00 |
|
v01d
|
774e7f9865
|
lpc43 GPIO Interrupts enabled and fixed (not all cases tested)
|
2016-06-04 00:28:53 -03:00 |
|
Gregory Nutt
|
34df98d97e
|
Use DEBUG assertions to save space
|
2016-06-03 14:49:05 -06:00 |
|
Gregory Nutt
|
704fadb0e6
|
STM32 TIM: Assure that a compilation error will occur if the old timer input clock frequency definitions are used
|
2016-06-03 14:17:18 -06:00 |
|
Gregory Nutt
|
3ec2386be8
|
STM32 TIM: There is a TIM17 on some parts too
|
2016-06-03 14:08:28 -06:00 |
|
Gregory Nutt
|
282edefab3
|
STM32 TIM: Add hooks for all previously unsupported timers. Also fix some PWM warnings.
|
2016-06-03 13:51:43 -06:00 |
|
Gregory Nutt
|
c11e923ad4
|
Fix a cut'n'paste error left from last commit.
|
2016-06-03 12:11:55 -06:00 |
|
Gregory Nutt
|
910bac65fa
|
STM32 Timer: Generalize and extend calculation of per-timer pre-scaler value. Inspired by original proposal from Pierre-noel Bouteville.
|
2016-06-03 11:38:59 -06:00 |
|
Gregory Nutt
|
88a41862b5
|
Revert "STM32 Timer Driver: Change calculation of per-timer pre-scaler value"
This reverts commit 082d32226b.
|
2016-06-03 09:41:17 -06:00 |
|
Gregory Nutt
|
d76d889efd
|
Restore FLASH_ERASALL in configurations where it was previously selected
|
2016-06-03 09:10:21 -06:00 |
|
Pierre-noel Bouteville
|
082d32226b
|
STM32 Timer Driver: Change calculation of per-timer pre-scaler value
|
2016-06-03 08:45:22 -06:00 |
|
Pierre-noel Bouteville
|
7e2aed942a
|
Correct conditioinal compilation in ST7565 driver
|
2016-06-03 08:42:32 -06:00 |
|
Pierre-noel Bouteville
|
426e425a55
|
Correct conditional compilation in STM32 timer cpature logic
|
2016-06-03 08:41:53 -06:00 |
|
Pierre-noel Bouteville
|
6a2a0bf11f
|
Note reserved bits in STM32 ADC
|
2016-06-03 08:39:17 -06:00 |
|
Pierre-noel Bouteville
|
94a14de190
|
Fix EFM32 FLASH conditional compilation
|
2016-06-03 08:38:11 -06:00 |
|
Gregory Nutt
|
fcdc17056b
|
STM32 F4 RTC: I believe that the F405/407 has only a single alarm. Not sure.
|
2016-06-02 15:04:23 -06:00 |
|
Gregory Nutt
|
a18dbfda6e
|
Remove drivers/mtd/flash_eraseall.c. It is not used in the OS and is just a dumb wrapper around the MDIOC_BULKERASE IOCTL call.
|
2016-06-02 10:44:13 -06:00 |
|
Gregory Nutt
|
2b47473778
|
Remove all references to CONFIG_SYSTEM_FLASH_ERASEALL
|
2016-06-02 10:19:02 -06:00 |
|
Gregory Nutt
|
82c73e206e
|
STM32 F4 RTC, trivial changes
|
2016-06-02 07:58:13 -06:00 |
|
Gregory Nutt
|
692ea396e3
|
Prep for NuttX-7.16 release
|
2016-06-01 15:45:23 -06:00 |
|
Frank Benkert
|
90ccba1ad0
|
SAMV7: MCAN: fix missing unlock of device in mcan_txempty
|
2016-06-01 10:38:19 -06:00 |
|
Gregory Nutt
|
2f974ffeaf
|
Merged in david_s5/nuttx/upstream_to_greg (pull request #37)
Fix the Value Line adc IRQ number selection
|
2016-05-31 19:18:11 -06:00 |
|
Gregory Nutt
|
82dec4acab
|
STM32F4 RTC: Remove 24 hour limit; Fix calculation of the alarm register (was not including day of the month). Fix a bad shift value
|
2016-05-31 19:13:21 -06:00 |
|
David Sidrane
|
70f2b47a0d
|
Fix the Value Line adc IRQ number selection
|
2016-05-31 14:54:04 -10:00 |
|
Gregory Nutt
|
6eac8bf28d
|
Update some comments
|
2016-05-31 17:31:15 -06:00 |
|
Gregory Nutt
|
15810946b1
|
Update some comments
|
2016-05-31 17:28:02 -06:00 |
|
Gregory Nutt
|
8ca5daf2b3
|
Changes from review of last PR
|
2016-05-31 15:52:56 -06:00 |
|
Gregory Nutt
|
213c1900b0
|
Merged in neilh20/anuttx/bugfix_rtcalarm (pull request #36)
The rtc examples "alarm 10" now runs to completion
|
2016-05-31 15:43:36 -06:00 |
|
neilh10
|
639410849e
|
alarm 10 now runs to completion
|
2016-05-31 14:17:52 -07:00 |
|
Gregory Nutt
|
b80bf20374
|
Fix another bungle in the last commit
|
2016-05-31 11:52:40 -06:00 |
|
Gregory Nutt
|
b5c37f0270
|
LP43: Add support for more than 63 interrupts (not currently needed)
|
2016-05-31 11:42:21 -06:00 |
|
Gregory Nutt
|
828c898a80
|
LP43: Add support for more than 63 interrupts (not currently needed)
|
2016-05-31 11:39:51 -06:00 |
|
neil H
|
af9ef88a8a
|
Merged nuttx/nuttx into master
|
2016-05-31 09:10:30 -07:00 |
|
Gregory Nutt
|
4f81a60ef6
|
Add a NAN test on 'x' in asin function of lib_asin.c. Suggested by Pierre-noel Bouteville.
|
2016-05-31 06:31:04 -06:00 |
|
Gregory Nutt
|
f06a06952f
|
LPC43xx: 1KB is 1024, not 1025. Noted by phreakuencies.
|
2016-05-31 06:22:10 -06:00 |
|
Gregory Nutt
|
6940fe9655
|
Update ChangeLog
|
2016-05-30 13:31:19 -06:00 |
|
Pierre-noel Bouteville
|
39c1e3aba2
|
Allow to not use all channet in a lower part of PWM
|
2016-05-30 11:58:22 -06:00 |
|
Gregory Nutt
|
5ef3e3e215
|
Replace confusing references to uIP with just 'the network'
|
2016-05-30 11:52:07 -06:00 |
|
Gregory Nutt
|
50d640a102
|
Typo fix
|
2016-05-30 09:51:46 -06:00 |
|
Gregory Nutt
|
9b4cec9228
|
Replace confusing references to uIP with just 'the network'
|
2016-05-30 09:51:15 -06:00 |
|
Gregory Nutt
|
44353f320c
|
Replace confusing references to uIP with just 'the network'
|
2016-05-30 09:37:34 -06:00 |
|
Gregory Nutt
|
4f208600aa
|
Replace confusing references to uIP with just 'the network'
|
2016-05-30 09:31:44 -06:00 |
|