Current implementation of QSPI in SPI mode was available only for MCUs
that do not have standard SPI at all. MCUs with both QSPI and SPI can
however also use QSPI in SPI mode and thus have one more SPI bus. This
commit adds required defines and config options to support QSPI in SPI
mode for all SAMv7 MCUs.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Calculate how long an I2C transation will take in microseconds, and use
this as the timeout for mpfs_i2c_sem_waitdone.
The reason for doing this is not to keep an i2c bus reserved for the full
1 second timeout, if e.g. a sensor is not on the bus / is faulty and
non-responsive. Reading the other sensors will be blocked for a relatively
long time (1 second) in this case. This fixes such behavior.
update LIBFDT to LIBC_FDT
update CONFIG_LIBFDT_DTC_VERSION to CONFIG_LIBC_FDT_DTC_VERSION
move dtc source code to fdt/dtc
move version_gen.h from apps/system/fdt to current dir
Signed-off-by: liaoao <liaoao@xiaomi.com>
This patch starts to implement the ability to build Meadow.OS for the Meadow F7 board with the NuttX mainline. It will be followed by more patches, progressively enabling full Meadow.OS functionality. This configuration is a work in progress.
The Meadow.OS source code is needed to build this configuration. Meadow.OS is being open-sourced under the Apache 2.0 license. A prototype of the source code release and integration with NuttX is at https://github.com/WildernessLabs/Meadow.OS/tree/prototype
This is the second revision of this patch, as the first one (https://github.com/apache/nuttx/pull/9997) was causing build issues on NuttX CI and was reverted.
This should only impact the Meadow F7 board configurations.
No testing to be done, as the configuration is under development.
Non-blocking sockets are almost never in the connected state when app try to
get result of connect success through poll, to avoid confusion because of
this error print, so downgrade the print level to warning.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
refer to https://man7.org/linux/man-pages/man7/ip.7.html
IP_MULTICAST_IF (since Linux 1.2)
Set the local device for a multicast socket. The argument
for setsockopt(2) is an ip_mreqn or (since Linux 3.5)
ip_mreq structure similar to IP_ADD_MEMBERSHIP, or an
in_addr structure. (The kernel determines which structure
is being passed based on the size passed in optlen.) For
getsockopt(2), the argument is an in_addr structure.
refer to https://man7.org/linux/man-pages/man7/ipv6.7.html
IPV6_MULTICAST_IF
Set the device for outgoing multicast packets on the
socket. This is allowed only for SOCK_DGRAM and SOCK_RAW
socket. The argument is a pointer to an interface index
(see netdevice(7)) in an integer.
testcase1:
TEST_IMPL(udp_multicast_interface) {
/* TODO(gengjiawen): Fix test on QEMU. */
RETURN_SKIP("Test does not currently work in QEMU");
int r;
uv_udp_send_t req;
uv_buf_t buf;
struct sockaddr_in addr;
struct sockaddr_in baddr;
close_cb_called = 0;
sv_send_cb_called = 0;
ASSERT(0 == uv_ip4_addr("239.255.0.1", TEST_PORT, &addr));
r = uv_udp_init(uv_default_loop(), &server);
ASSERT(r == 0);
ASSERT(0 == uv_ip4_addr("0.0.0.0", 0, &baddr));
r = uv_udp_bind(&server, (const struct sockaddr*)&baddr, 0);
ASSERT(r == 0);
r = uv_udp_set_multicast_interface(&server, "0.0.0.0");
ASSERT(r == 0);
/* server sends "PING" */
buf = uv_buf_init("PING", 4);
r = uv_udp_send(&req,
&server,
&buf,
1,
(const struct sockaddr*)&addr,
sv_send_cb);
ASSERT(r == 0);
ASSERT(close_cb_called == 0);
ASSERT(sv_send_cb_called == 0);
/* run the loop till all events are processed */
uv_run(uv_default_loop(), UV_RUN_DEFAULT);
ASSERT(sv_send_cb_called == 1);
ASSERT(close_cb_called == 1);
ASSERT(client.send_queue_size == 0);
ASSERT(server.send_queue_size == 0);
MAKE_VALGRIND_HAPPY();
return 0;
}
testcase2:
TEST_IMPL(udp_multicast_interface6) {
/* TODO(gengjiawen): Fix test on QEMU. */
RETURN_SKIP("Test does not currently work in QEMU");
int r;
uv_udp_send_t req;
uv_buf_t buf;
struct sockaddr_in6 addr;
struct sockaddr_in6 baddr;
if (!can_ipv6())
RETURN_SKIP("IPv6 not supported");
close_cb_called = 0;
sv_send_cb_called = 0;
ASSERT(0 == uv_ip6_addr("::1", TEST_PORT, &addr));
r = uv_udp_init(uv_default_loop(), &server);
ASSERT(r == 0);
ASSERT(0 == uv_ip6_addr("::", 0, &baddr));
r = uv_udp_bind(&server, (const struct sockaddr*)&baddr, 0);
ASSERT(r == 0);
r = uv_udp_set_multicast_interface(&server, "::1%lo0");
r = uv_udp_set_multicast_interface(&server, NULL);
ASSERT(r == 0);
/* server sends "PING" */
buf = uv_buf_init("PING", 4);
r = uv_udp_send(&req,
&server,
&buf,
1,
(const struct sockaddr*)&addr,
sv_send_cb);
ASSERT(r == 0);
ASSERT(close_cb_called == 0);
ASSERT(sv_send_cb_called == 0);
/* run the loop till all events are processed */
uv_run(uv_default_loop(), UV_RUN_DEFAULT);
ASSERT(sv_send_cb_called == 1);
ASSERT(close_cb_called == 1);
MAKE_VALGRIND_HAPPY();
return 0;
}
Signed-off-by: wangchen <wangchen41@xiaomi.com>
Move SCU-specific ak09912 sensor into spresense board layer.
Rename a function name to register SCU sensor driver
from ak09912_register to ak09912_scu_register.
