Commit Graph

4838 Commits

Author SHA1 Message Date
Gregory Nutt
67699b8cae Tiva Ethernet: Update PHY initialization 2015-01-02 10:11:57 -06:00
Gregory Nutt
a97d304d1a STM32 RTC: Add Kconfig options needed with the preceding commit 2015-01-02 06:45:45 -06:00
Gregory Nutt
7b89f64b37 stm32-rtc: Add support for the internal low speed clock (LSI)
Some boards do not have the external 32khz oscillator installed, for those boards we must fallback to the crummy to the crummy internal RC clock.  Turn on by defining CONFIG_RTC_LSICLOCK.

From Kevin Hester <kevinh@geeksville.com> via Lorenz Meier.
2015-01-02 06:32:40 -06:00
Gregory Nutt
367af5c65d Cosmetic update to some comments 2015-01-02 06:07:56 -06:00
Gregory Nutt
adb9ac6c60 Cosmetic change to file formatting 2015-01-01 15:55:33 -06:00
Gregory Nutt
bc3fc9e3a3 TM4C129X Ethernet: Add logic to get pre-programmed MAC address from user FLASH registers 2015-01-01 12:28:46 -06:00
Gregory Nutt
48f6e06ed1 Tiva FLASH: Add FLASH register definitions for the TM4C129 family 2015-01-01 11:44:35 -06:00
Gregory Nutt
e83f531724 Tiva PHY: Hard code some properties of the internal PHY 2015-01-01 08:11:17 -06:00
Gregory Nutt
14992be38f Tiva Ethernet: Update Ethernet intializaiton logic. Still things to be done 2015-01-01 07:55:15 -06:00
Gregory Nutt
61edf50f9a Tiva: Add peripheral ready header file; fix typos in clock/pwr enable header files 2015-01-01 07:54:31 -06:00
Gregory Nutt
0eb224aeae Ethernet skeleton: Add some more example logic 2014-12-31 13:45:19 -06:00
Gregory Nutt
cc038a61f6 Tiva Ethernet: Integrate use of workqueue so the network processing is not done at the interrupt level 2014-12-31 13:03:00 -06:00
Gregory Nutt
b81661c258 Tiva Ethernet: Add basic clock/power controls for Ethernet and internal PHY 2014-12-31 11:40:01 -06:00
Gregory Nutt
903e7f5d2b Tiva Ethernet: First cut at TM4C129X Ethernet driver. Initial commit is basically just the STM32 Ethernet driver with modifications for a clean compilation in the Tiva environment 2014-12-31 11:34:24 -06:00
Gregory Nutt
a96c91db1e Tiva Ethernet: Minor naming update for compatibility 2014-12-31 09:39:00 -06:00
Gregory Nutt
7c07766468 Tiva Ethernet: Add DMA descriptor definitions 2014-12-31 07:32:11 -06:00
Gregory Nutt
119e957472 Mostly cosmetic 2014-12-30 17:00:15 -06:00
Gregory Nutt
f61d15bb55 Tiva Ethernet: Completes TM4C129X Ethernet register definition header file 2014-12-30 13:42:19 -06:00
Gregory Nutt
408139dada Don't error out if no ethernet definitions available 2014-12-30 13:26:18 -06:00
Gregory Nutt
9a71dc091b Tiva Ethernet: More progress with register bit definitions 2014-12-30 11:08:18 -06:00
Gregory Nutt
8cea115be7 Tiva Ethernet: More progress with register bit definitions 2014-12-30 09:22:24 -06:00
Gregory Nutt
6bd5702778 TM4C129G Ethernet: Add Ethernet register addresses. Header files still incomplete 2014-12-30 08:09:09 -06:00
Gregory Nutt
1dc66f3104 Tiva: Add framework to support the uniqueu TM4C Ethernet register definitions 2014-12-30 07:07:16 -06:00
Gregory Nutt
a0727124c2 stm32: update description and code documentation. Also fixes a few code formattings.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:59:46 -06:00
Gregory Nutt
1a27614552 stm32: fix wait upon vertical blank. This should never have occurred before.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:48:25 -06:00
Gregory Nutt
171c017a0c stm32: fix faulty access to non existing layer. This disables operation that requires double layer support, when configured for single layer only.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2014-12-29 09:45:30 -06:00
Gregory Nutt
23ac4caf5a C5471: choice has a default value. It should not 2014-12-28 18:15:17 -06:00
Gregory Nutt
ad9429a527 Tiva SSI: Fix oversight in last commit. Would only fixe the case where the single SSI enabled was SSI0 2014-12-28 16:58:36 -06:00
Gregory Nutt
c802d5276b Tiva SSI: Fix some recent breakage to the Tiva SSI driver for the case where only one SSI modules is enabled 2014-12-28 16:55:47 -06:00
Gregory Nutt
59c6f42be4 STM32 Serial: PX4 HW workarround for flaky STM32 RTS. From David Sidrane 2014-12-27 18:58:18 -06:00
Gregory Nutt
d597e94332 Remove STM32-specific RX flow control logic from the upper level serial driver to the lower level STM32 serial driver 2014-12-27 09:45:45 -06:00
Gregory Nutt
405d72c1ad Serial Upper Half: Add watermarks to RX flow control logic 2014-12-27 07:43:06 -06:00
Gregory Nutt
214183ff93 STM32: Fix some incorrectly placed conditional logic 2014-12-26 12:41:35 -06:00
Gregory Nutt
78affd0f9a EFM32 Timer/PWM: Add support for timer/PWM EFM32GG. From Pierre-noel Bouteville 2014-12-26 09:55:19 -06:00
Gregory Nutt
45a93bb30e ARMv7M: More runtine stack checking logic. From David Sidrane 2014-12-26 08:46:25 -06:00
Gregory Nutt
570943bd71 STM32 I2C: Add strings to decode trace events. From David Sidrane 2014-12-26 08:35:21 -06:00
Gregory Nutt
831167f806 Add support for run time stack checking for the STM32. From David Sidrane 2014-12-26 08:30:42 -06:00
Gregory Nutt
8a2a594348 Tiva: Update UART header file for TM4C129X 2014-12-22 14:11:56 -06:00
Gregory Nutt
21f6598faf Tiva: Upate GPIO header file for TM4C129X 2014-12-22 12:59:13 -06:00
Gregory Nutt
f91583af61 TM4C129X: Simplify be removing unnecessary temporary variable 2014-12-22 12:01:33 -06:00
Gregory Nutt
bd2d83c656 TM4C129X: Simplify be removing unnecessary temporary variable 2014-12-22 11:53:31 -06:00
Gregory Nutt
3b863966fe TM4C129X: First cut at new Tiva clock configuration logic 2014-12-22 11:45:10 -06:00
Gregory Nutt
5184e4dade TM4C129X: A small step toward understanding new Tiva clocking 2014-12-22 09:30:41 -06:00
Gregory Nutt
7b6d0391ab Tiva: Rename TIVA_CRC_BASE to TIVA_CCM_BASE 2014-12-21 17:44:11 -06:00
Gregory Nutt
488b02ff6c Tiva: Add support for I2C6-9 2014-12-21 17:20:16 -06:00
Gregory Nutt
f26384c386 Tiva SSI and board configurations: hange negative Tiva logic CONFIG_SSIx_DISABLE to positive logic CONFIG_TIVA_SSIx. Add support for SSI2 and SSI3 2014-12-21 15:23:37 -06:00
Gregory Nutt
3ea03b9806 Improved comments 2014-12-21 14:09:04 -06:00
Gregory Nutt
f4543de408 TM4C129X: Increated power/clocking macros into I2C driver 2014-12-21 13:02:12 -06:00
Gregory Nutt
20986de89e TM4C129X: Add macros to enable/disable peripheral power 2014-12-21 11:40:39 -06:00
Gregory Nutt
9857b59e79 Tiva SSI: Use portable macros to enable peripheral clocking 2014-12-21 11:16:21 -06:00