Gregory Nutt
c747521953
STM32 RTC: Extend the RTC interface to support reading subseconds. From Jussi Kivilinna
2015-02-16 07:18:09 -06:00
Gregory Nutt
f7bb64b327
Suffer the consequences of moving struct timeval to its correct location
2015-02-15 15:18:35 -06:00
Gregory Nutt
529bc9626c
Add support for RTC driver to the STM32F4-Discovery board
2015-02-15 10:11:01 -06:00
Gregory Nutt
68d39b69aa
Remove an unused variable
2015-02-15 08:51:39 -06:00
Gregory Nutt
726b0d5f58
RTC: A little more clean-up of the RTC driver
2015-02-15 08:19:23 -06:00
Gregory Nutt
53322a50f4
STM32 RTC: Implement the rdtime() method of the RTC lower half interface
2015-02-13 13:56:22 -06:00
Gregory Nutt
702f155fd0
STM32 RTC driver lower half: Implement the settime method of the RTC interface
2015-02-13 13:36:15 -06:00
Gregory Nutt
b0b6747d49
Break out a new internal interface, stm32_rtc_setdatetime(). This eliminates some un-necessary time conversions. From Freddie Chopin.
...
Add a skeleton implementation of the RTC lower half interface at arch/arm/src/stm32/stm32_rtc_lowerhalf.c. This is just the framework for the RTC lower half. None of the interface methods have yet been implemetned.
2015-02-13 12:56:58 -06:00
Gregory Nutt
c662563b83
Forgot to add a file in the last commit
2015-02-13 10:05:10 -06:00
Gregory Nutt
501bc15fbd
RTC: Remove all backdoor interfaces from rtc.h
2015-02-13 08:41:34 -06:00
Gregory Nutt
d1fa95ffc3
Merge commit 'd000b0ac237cb6b17e3d355b55250c3ca7e9f2d6'
2015-02-11 18:07:03 -06:00
sauttefk
7384d3bd79
Add TI EK-TM4C1294XL launchpad support
2015-02-12 00:30:38 +01:00
Gregory Nutt
24e51794f9
Kinetis: Add architectural support for the K26Z128VLH4. From Derek B. Noonburg
2015-02-11 07:15:45 -06:00
Gregory Nutt
28c2d93212
LP17 Ethernet Driver: Fix some compile problems when IPv6 is enabled
2015-02-10 15:23:11 -06:00
Gregory Nutt
5566a458d1
LPC17xx: Add IPv6 support to the LPC17 Ethernet driver. Untested... I no longer have a proper environment for LPC17 debug.
2015-02-10 14:04:08 -06:00
Gregory Nutt
9e6cd16a8b
SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing.
...
SAM4E-EK: The nsh configuration now configures the Ethernet driver for execution on the HP work thread.
2015-02-10 11:10:55 -06:00
Gregory Nutt
8b0d9fb456
Fix some warning
2015-02-09 18:24:31 -06:00
Gregory Nutt
0a6ae631dc
Clone the SAMA5D4 IPv6 support to the SAM4E EMAC and SAMAd3 EMAC and GMAC drivers.
2015-02-09 17:16:55 -06:00
Gregory Nutt
f0d318c124
Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.
2015-02-09 16:12:11 -06:00
Gregory Nutt
08677542dc
SAMA5D Ethernet: Add support for CONFIG_NET_NOTINTS so that the driver can operate from the work queue thread instead of doing everything from the interrupt level.
2015-02-09 15:26:05 -06:00
Gregory Nutt
25f187d754
ARMv7-A interrupt handler: Should not automatically re-enable interrupts on interrupt return. That interferes with the driver's ability to manage interrupts.
2015-02-09 15:24:31 -06:00
Gregory Nutt
fa580e17cf
Oops... Conditioned on IPv4 wheren IPv6 was intended
2015-02-09 14:16:32 -06:00
Gregory Nutt
987715e8a3
Fix IPv4-dependend debug output
2015-02-09 13:18:31 -06:00
Gregory Nutt
09b356c497
SAMA5D4 EMAC: Add support for Multicast address matching and IPv6
2015-02-09 10:50:38 -06:00
Gregory Nutt
67f0563fad
Add logic so that STM32 Ethernet drivier can avoid interrupt level processing and, instead, execute on the work thread.
2015-02-09 08:33:29 -06:00
Gregory Nutt
8bac6b71ce
SYSLOG: Add an option to use the syslog'ing device as the system consolution. This option enables a low-level, write-only console device at /dev/console (similar to the low-level UART console device). From Pierre-noel Bouteville.
2015-02-08 06:53:24 -06:00
Gregory Nutt
b2ed249b42
STM32 SPI: Clean-up asymmetric configuration of SPI6
2015-02-07 18:59:06 -06:00
Gregory Nutt
706f01b8a2
STM32 SPI: The source clock for SPI 4,5, and 6 should be PCLK2, not PCLK1 (for F411, F427, and F429). Per David Sidrane.
2015-02-07 13:59:45 -06:00
Gregory Nutt
9318121175
Updated Tiva ADC files
2015-02-06 16:56:12 -06:00
Gregory Nutt
3ca8d3766a
Tiva ADC: Add Kconfig options for ADC. From Calvin Maguranis
2015-02-05 19:05:13 -06:00
Gregory Nutt
225489a99a
Tiva ADC: Partial build support. Still missing Kconfg changes
2015-02-05 18:01:18 -06:00
Gregory Nutt
376f39c822
Tiva ADC: Adds a Tiva ADC driver. From Calvin Maguranis
2015-02-05 17:36:23 -06:00
Gregory Nutt
a6bda5f8ba
Tiva ADC: Register definitiona header file from Calvin Maguranis
2015-02-05 16:29:17 -06:00
Gregory Nutt
46a153aa3e
Adds support for TM4C123G timers; integrates with the TM4C123G Launchpad. From Calvin Maguranis
2015-02-05 13:51:32 -06:00
Gregory Nutt
ee8d792737
Networking: Changes need to build ICMPv6 'router' configuration on STM32 with network debug enabled
2015-02-05 11:47:56 -06:00
Gregory Nutt
821ffc0b8a
STM32: Add an IPv6 configuration for the STM32F4-Discovery board (witht he STM32-DISCO_BB base board). Verify that the STM32 Ethernet driver works with IPv6.
2015-02-05 11:21:04 -06:00
Gregory Nutt
de75731989
Add IPv6 support to network driver skeleton and to SAMA5D4 Ethernet driver (which, unfortunately is still missing address filtering logi)
2015-02-05 10:49:32 -06:00
Gregory Nutt
506c6c8512
ICMPv6: Add logic to behave like a router (if so configured): NuttX will not send the router advertisement message in response to any router solicitation messages.
2015-02-05 09:43:29 -06:00
Gregory Nutt
1646e643d7
Networking: Break out Ethernet definitions into a separate file; add IPv6 multicast addresses as common globals, Ethernet drivers need to filter link-local, all nodes Ethernet address
2015-02-04 14:51:20 -06:00
Gregory Nutt
f036df9faa
Minor update to Kconfig file selections
2015-02-04 08:21:32 -06:00
Gregory Nutt
011c6e0c7e
Re-arrange condition logic from the last change to avoid having STM32-specific conditional logic outside of the STM32 sandbox.
2015-02-04 07:24:19 -06:00
Gregory Nutt
2393a074e5
STM32: Add driver for STM32L162XX AES peripheral. Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2015-02-04 06:49:05 -06:00
Gregory Nutt
d617384d27
EFM: Remove a misbehaving assertion. From Pierre-noel Bouteville
...
Also remove spaces before and after paretheses to conform to coding standard.
2015-02-03 13:34:37 -06:00
Gregory Nutt
d08e29e0a0
Remove and extra endif from the Kconfig
2015-02-03 12:46:40 -06:00
Gregory Nutt
5189cddef2
Convert the 64-bit usec limit to a 32-bit tick limit
2015-02-03 07:18:17 -06:00
Gregory Nutt
f017f4c8a8
SAM4CM: Add support for tickless operation
2015-02-03 07:00:54 -06:00
Gregory Nutt
c51ebf8c72
Refresh some configurations
2015-02-01 12:15:46 -06:00
Gregory Nutt
ec6383d2d2
Fix compile issues with configs/sim/nettest
2015-02-01 12:00:30 -06:00
Gregory Nutt
5f72080e0a
SIM: fix a case in the simulated Ethernet driver where it was using a old structure name
2015-02-01 09:00:42 -06:00
Gregory Nutt
b15632e8ba
drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters.
2015-02-01 07:24:16 -06:00