purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
In the gcc-riscv compiler, __builtin_ffs will call ffs, and calling __builtin_ffs in ffs will cause recursion
Change ffs to an inline function, and compile ffs implemented by nuttx by default.
Only call the implementation of nuttx when the compiler cannot provide an ffs implementation.
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Using user allocated buffers for DMA transfers is not safe for two reasons:
- User space memory is virtual memory, DMA needs physical memory
- User memory buffer alignment cannot be guaranteed -> cache line ops
are not safe
Add a simple allocator for DMA safe memory. It will provide contiguous
blocks of memory with D-Cache line size alignment.
NOTE: The optimal granule size is the D-Cache line size (64), but due
to restrictions in the granule allocator this would result in a maximum
block size of 2K only, thus use 256B granules instead givin 8K max block
size.
Once the granule allocator is fixed this limitation can be removed.
`;` is treated as a list separator in CMake.
the file(STRING) function will read the wrong .config value
string(REGEX REPLACE) will also incorrectly handle lines containing `;`
so here we can only parse character by character.
Signed-off-by: xuxin19 <xuxin19@xiaomi.com>
Option CONFIG_SENSORS_QENCODER might be configured even if SAMv7 qencoder
over timer counter is not used (for example encoder over GPIO is selected
with CONFIG_SAMV7_GPIO_ENC). This can cause compile warnings, also build
of sam_qencoder.c file is unnecessary in that case.
New hidden option CONFIG_SAMV7_QENCODER is added and automatically
selected if at least one timer counter is enabled for qencoder. Build
is triggered on this option.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Otherwise, the IP address is always considered to conflict, and the ipv6
address cannot be effectively obtained.
Later we will look at how to perform conflict detection on L3 network cards
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
PWMx_CHy_LONLY options have been added to Kconfig, too.
If LONLY is selected, it's not possible to use complementary outputs.
If LONLY is not selected, it's possible to use H or complementary
output. If configured correctly with cpol and dcpol attributes,
a H-like behaviour can be achieved. May be useful when you run out
of free MCU pins.
Signed-off-by: Stepan Pressl <pressste@fel.cvut.cz>
These configs are changed based on below rules.
1. always enable +CONFIG_LV_USE_NUTTX=y
2. If touchpad is used, enable +CONFIG_LV_USE_NUTTX_TOUCHSCREEN=y
3. enable log by +CONFIG_LV_USE_LOG=y
4. If -CONFIG_LV_MEM_CUSTOM=y previously defined, replace it with +CONFIG_LV_USE_CLIB_MALLOC=y +CONFIG_LV_USE_CLIB_SPRINTF=y +CONFIG_LV_USE_CLIB_STRING=y
5. If -CONFIG_LV_PORT_USE_FBDEV=y, default config is for fbdev. If -CONFIG_LV_PORT_USE_LCDDEV=y, +CONFIG_LV_USE_NUTTX_LCD=y
6. Remove all -CONFIG_LV_TICK_CUSTOM=y -CONFIG_LV_TICK_CUSTOM_INCLUDE="port/lv_port_tick.h"
7. If -CONFIG_LV_PORT_LCDDEV_DOUBLE_BUFFER=y, replace it with CONFIG_LV_NUTTX_LCD_DOUBLE_BUFFER=y. For fbdev, double buffer is automatically detected.
8. If -CONFIG_LV_COLOR_16_SWAP=y, need to upgrade the LCD driver to support hardware byte order swap.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
The qemu-rv use a small init code for M mode in kernel build.
It is hard-coding and is difficult to change. Due to the fact,
introduce a already mature SBI implement (e.g OpenSBI) to
replace existing code is a better choice.
This patch introduce some change for qemu-rv:
1. use SSTC to provide time interrupt in kernel build
2. remove uncessary M mode trap.
For simplicity, this patch does not add support for booting
nuttx for any core, but force boot core to start core 0 and
let core 0 do the initialization.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
SSTC extension allows nuttx to implement S-mode timer directly,
which is useful for starting at S-mode.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
As `up_get_intstackbase` supports per cpu stack base, fix
the report value with the cpu specific one.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
It is misleading to allocate stack from static array and heap,
make all stack allocated from heap area.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
according to manual:
The FPU is not affected by any security configuration.
Thus, it appears as not present in PERIPHID[n].PERM
register located in the SPU
This patch adds definitions to support user space device mappings
that allows devices like frame buffer to be accessible from user
space in kernel mode.
The are mainly two changes:
- in `mm/`:
added vm_map_region(), vm_unmap_region() for drivers to do
device mapping easily.
- in `arch/`:
extended ARCH_SHM_NPAGES as user-space mapping region size.
decoupled ARCH_SHM_MAXREGIONS from region size calculations and
limit its usage only for SysV shm purposes.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This patch adds a way to configure PLL frequencies. The configuration is
given by board logic.
These values should only be modified by the bootloader, but we don't have
that yet so the flag is never activated.