This commit adds two new IOCTL commnands for ADC driver. Command
ANIOC_RESET_FIFO resets FIFO head and tail which causes the driver
to wait for the new data to be received. Calling this command before
reading ADC data in user space ensures that the read data are newly
sampled.
Command ANIOC_SAMPLES_ON_READ return the number of read channels in
the buffer. This can be useful in nonblocking mode when the application
needs to get the samples received before the app was started.
Both IOCTL commands are used only in generic driver section only and do
not have any effect on existing architecture specific drivers.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
This command enables the application to perform the final steps of the
booting process prior to finally switching the execution to another
firmware image.
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
to avoid libcxx misdetect NuttX support utimensat(_LIBCPP_USE_UTIMENSAT).
This patch need be reverted after utimensat is supported in NuttX.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
and implement all status related change function. the individual
file system change will provide in other upcoming patchset.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8fde9db8eba9586e9c8da078b67e020c26623cf4
Number of configured ADC channels is currently only defined in board
level section, typically in xxx_adc.c file. This commit introduces
ioctl command ANIOC_GET_NCHANNELS that returns the number of configured
channels which is determined by the driver code. The change can allow the
applications to be more flexible when it comes to multiple ADC devices
with different number of configured channels.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
so the source code compiled by host environment can include config.h
directly and then avoid pass Kconfig option through Makefile manually
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic9fe6f846082cef2d0808dc717df8ae6ed929edf
PWM drivers currently use channel number 0 for the channels that are not
used by the application. This commit adds number -1 which indicates that
all following channels are not configured and that the loop can be broken.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
BOARDIOC_SWITCH_BOOT is required to communicate the boot partition from
userspace (OTA subsystem) to board. It can be used to change the system
boot behavior. So it's useful for A/B boot or even single boot case.
For the board support A/B boot case:
1. Download the new image from the sever
2. Write the new image to the alternative partition
3. Call BOARDCTL_SWITCH_BOOT to the alternative system
For single boot partition case:
1. Download the new image from the sever
2. Call BOARDCTL_SWITCH_BOOT and reboot to a small system
3. Write the new image to the main partition in the small system
4. Call BOARDCTL_SWITCH_BOOT again to the main system
Change-Id: Ifebb495784ecf06842946a249bec64f75dce894f
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
Summary:
- On Linux, fsblkcnt_t and fsfilcnt_t are used in struct statfs
- This commit applies the same logic
Impact:
- None
Testing:
- Tested with spresense:rndis_smp
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Gregory Nutt has submitted the SGA
Zilogic Systems has submitted the SGA
Uniquix Tecnologia has submitted the SGA
Michael Jung has submitted the ICLA
Alan Carvalho de Assis has submitted the ICLA
as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
and move the socket special process from fstat/nx_vfcntl/ to file_fstat/file_vfcntl
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia10341538488ba3a8444df8e73fb5257b2a1f512
include/nuttx/wqueue.h:
libs/libc/wqueue/work_cancel.c:
libs/libc/wqueue/work_queue.c:
sched/wqueue/kwork_cancel.c:
sched/wqueue/kwork_queue.c:
* Fix spelling, grammar, and typos.
* Improve wording in a few areas.
* These changes affect comments only. No functional changes.
since it's useful to redirect these functions to others
sometime(e.g. validate the memory before write).
Change-Id: I6253a9231af8809e8362f4bc5a1bd67fb094c3b0
Note: all attributes is guarded by PSEUDOFS_ATTRIBUTES to save the space
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I664d60382e356068fd920f08aca5b4a49d8d92a9
Since a SOL option IP_TTL exist, we should rename this IP_TTL
in netconfig.h to avoid confusion.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Change-Id: Ib04c36553f23bce8d362e97294a8b83eaa050cf3
Note: this patch can get file path from root pseudo file handle,
but a general infrastructure is setup for other file system too.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I86cd79ebb741f2f43fdd398bb7498c40687d949b
it's more simple to reuse the resolve argument as the recursive count
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I826b2fef3af8b12aae230e4766ab09f8de988f8a
it's more simple to make mm_heap_s opaque outside of mm
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5c8e435f6baba6d22b10c5f7e8d9191104fb5af2
and remove mm_sbrk and kmm_sbrk since it's wrong to expose
sbrk to other heaps except the default userspace heap.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
vfs/fs_select.c:116:25: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
vfs/fs_select.c:153:22: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Change-Id: I2e32bb8a3db8ff5a5955b83b382ac2fa5756122c
Signed-off-by: ligd <liguiding1@xiaomi.com>
Documentation/reference/os/wqueue.rst:
* CONFIG_SIG_SIGWORK: Fix sentence that was cut off in the
middle.
include/signal.h:
* SIGWORK: Fix grammar in comment.
sched/Kconfig:
* config SIG_SIGWORK: Fix ---help--- text to indicate that
this user-configured signal number may be used by various
internal worker threads.
since the unwinder not only work with arm but also other arch(e.g. riscv)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I56cc54f2c99560c858362ab2dfba524097385716
I plan to use a simple IOB chain w/o IOB queue for tcp recv buffers.
for large configurations, uint16_t is not large enough to represent
the entire socket buffer.
chips that have multiple separate heaps.
For now it's used to enable APIs to initialize the different heaps
during the start sequence but can be extended for other purposes that
manage those heaps.
Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
from https://pubs.opengroup.org/onlinepubs/007904875/functions/setpriority.html:
1.The nice value shall in the range [-{NZERO},{NZERO} -1]
2.Lower nice value shall cause more favorable scheduling
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5ad60d92abc3b69fbaa406da68cec2e40ca3fa6d
since kernel component should use UTC instead local time
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Icf939e1ab0af8e577105f539d2553bc67b3b3d10
corrected setting SDMMC_DCTRL.DTMODE field for block data transfers ending on block count
and for block data transfers ending with STOP_TRANSMISSION command;
stm32_sdio: added more debug messages
instead calling kmm_heapmember or umm_heapmember because:
1.The stack supplied by caller may allocate from heap too
2.It's hard to implement these two function in ASan case
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I196377822b7c4643ab4f29b7c1dc41dcd7c4dab1
* port didn't know about data-register fifo
* port didn't handle overrun condition
* driver could get stuck if interrupts were skipped due to saturation
since the standard require the caller pass the name explicitly
https://pubs.opengroup.org/onlinepubs/009695399/functions/posix_spawn.html:
The argument argv is an array of character pointers to null-terminated strings.
The last member of this array shall be a null pointer and is not counted in argc.
These strings constitute the argument list available to the new process image.
The value in argv[0] should point to a filename that is associated with the
process image being started by the posix_spawn() or posix_spawnp() function.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id79ffcc501ae9552dc4e908418ff555f498be7f1
All modern desgin support stack pointer and it's also an
important information, so let's standardize this interface.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Summary:
- This commit introduces a separate text memory for ELF
- The logic is similar to modlib
Impact:
- None
Testing:
- Tested with spresense:elf
- NOTE: needs separate commits
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
It's better to save one argument by returning pid directly.
This change also follow the convention of task_create.
BTW, it is reasonable to adjust the function prototype a
little bit from both implementation and consistency since
task_spawn is NuttX specific API.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Gregory Nutt is the copyright holder for those files and he has submitted the
SGA as a result we can migrate the licenses to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Fix compilation when CONFIG_DEV_PIPE_SIZE > 0 && CONFIG_DEV_FIFO_SIZE == 0
In this case the nx_mkfifo doesn't exist.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
Drop to user-space in kernel/protected build with up_pthread_exit,
now all pthread_cleanup functions executed in user mode.
* A new syscall SYS_pthread_exit added
* A new tcb flag TCB_FLAG_CANCEL_DOING added
* up_pthread_exit implemented for riscv/arm arch
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
since emergstream always call syslog_force, but syslog_force is designed
for the interrupt context, and then doesn't mean any emergency thing.
On the other hand, emergstream has other bad side effect:
1.Can't output to file or dev channel
2.Can't work well with the interrupt buffer
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
specified the name of remote proc(rpmsg server)
Change-Id: I0086bb43727a2bbb5e68f88907b5e4608182ef9c
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
N/A
cu_main.c:172:22: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
by asan
Change-Id: I224345bddb11523db0c4a91c16617a3200fad034
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
N/A
specified the name of remote proc(rpmsg server)
Change-Id: Ie270d651071e87a40a80ab489597ae18db9814f0
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
since the console is normally opened three time as stdin, stdout and
stderr and remove the dependence on STANDARD_SERIAL because other type
of serial drivers also support the poll through the same codebase.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie68322c4647cc838b295491329969869d6ba310b
NuttX provides the UDP_BINDTODEVICE socket option. This is a UDP protocol-specific implementation of the semi-standard Linux SO_BINDTODEVICE socket option: "SO_BINDTODEVICE forces packets on the socket to only egress the bound interface, regardless of what the IP routing table would normally choose. Similarly only packets which ingress the bound interface will be received on the socket, packets from other interfaces will not be delivered to the socket." https://codingrelic.geekhold.com/2009/10/code-snippet-sobindtodevice.html
If CONFIG_NET_UDP_BINDTODEVICE is selected and a UDP socket is bound to the device, then unrecognized packets UDP packets must not be dropped, but must be forwarded along to the bound socket unconditionally.
It the typical case, this should have no impact. It does effect the applications that use DHCP and do select the UDP_BINDTODEVICE socket option.
This PR replace existing improper logic in the code and also the improper attempts to fix problems from PR #3601 and PR #3598. Those changes are improper because they expose DHCP appliction dependencies in the OS, breaking modularity and independence of the OS and application.
Tested with stm32f4discovery:netnsh with CONFIG_NET_UDP_BINDTODEVICE. A proper DHCP test setup is needed, however.
Summary:
- SP_SECTION was introduced to allocate spinlock in non-cachable
region mainly for Cortex-A to stabilize the NuttX SMP kernel
- However, all spinlocks are now allocated in cachable area and
works without any problems
- So SP_SECTION should be removed to simplify the kernel code
Impact:
- None
Testing:
- Build test only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Pros:
* Reduce code differences
* Smaller allocations for !CONFIG_ARCH_USE_MODULE_TEXT
Cons:
* Likely to use more memory for !CONFIG_ARCH_USE_MODULE_TEXT in total
Tested with:
* sim:module on macOS
* esp32-devkit:nsh + CONFIG_MODULE on qemu
* lm3s6965-ek:qemu-protected + CONFIG_EXAMPLES_SOTEST on qemu
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Removes the family identifier from the device configuration, since the device
family is already part of the rom code and the underlying logic does know how
to extract this information.
include/nuttx/1wire drivers/sensors
stm32f103-minimim
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
I've seen a module with 16 bytes .rodata alignment for xmm operations.
It was getting SEGV on sim/Linux because of the alignment issue.
The same module binary seems working fine after applying this patch.
Also, tested on sim/macOS and esp32 on qemu,
using a module with an artificially large alignment. (64 bytes)
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This adds a sensor driver for the hyt271, hyt221, and hyt939 sensor module from
vendor iST (Innovative Sensor Technology). This sensor type is connected via i2c
bus and allows the measurement of relative humidity and temperature.
Each driver instance supports two different character device for each type
(/dev/sensor/tempX and /dev/sensor/humiX).
This driver also supports changing the i2c address of one connected sensor on
the bus. This requires a callback to the platform-specific board logic which
must ensure a power-on reset.
Optional the driver allows setting up a read interval for fetching sensor data.
This is done by a worker thread and can be useful when watching several sensors
via poll() by the userspace application.
Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
Marco Krahl has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This change makes it so that the timeout is set as part of the SDIO_WAITENABLE call instead of the SDIO_EVENTWAIT call. By doing so, you eliminate all opportunity for a race condition.
stm32h7:sdmmc Check if busy ended early
Michael Jung has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Matouš Pokorný has submitted the ICLA and we can migrate the licenses
to Apache.
Datavision has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Add implementations of getopt_long() and getopt_long_only()
There could be impacts to getop() since that implementation is shared withe new getopts_long() and getops_long_only() implementation.
Tested using a modified version of sim:nsh
Laurent Latil has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Pierre-Noel Bouteville has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Bob Feretich has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
DS Automotion GmbH has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Robert A. Feretich has submitted the ICLA and we can migrate the licenses
to Apache.
RAF Research LLC has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Mateusz Tomasz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Abdelatif Guettouche has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Alan Carvalho de Assis has submitted the ICLA and we can migrate the licenses
to Apache.
Uniquix Ltda. has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
getopt() in the FLAT build environment is not thread safe. This is because global variables that are process-specific in Unix are truly global in the FLAT build. Moving the getopt() variables into TLS resolves this issue.
No side-effects are expected other than to getopt()
Tested with sim:nsh
This is a compatibility issue if different structures included
in the usrsock server/client scene, usrsock client has no habit
of actively choosing of config CONFIG_NETDEV_IFINDEX at most of the time
Signed-off-by: chao.an <anchao@xiaomi.com>
David S. Alessio has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
since other subsystem doesn't need call these function anymore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Idfb217c412db62d9f17f427310b75bb78785dc50
Sebastien Lorquet has submitted the ICL and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
EDL, BRS and ESI bits added to struct can_hdr_s.
The `ch_unused' field is useless (adjacent fields in
packed structs are aligned to the next byte), but some
drivers explicitly set this field to zero, so it is kept there
for API backward compatibility.
Signed-off-by: Jaroslav Beran <jara.beran@gmail.com>
The idea is to have something like EXTRAVERSION. This is useful for
getting RC tags, development tags and for customizing the version. For
example using the tag `nuttx-10.0.0-RC0` the VERSION will be
`10.0.0-RC0`
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
When CONFIG_SYMTAB_ORDEREDBYNAME is selected most code will use
the ordered search function. When it is not selected no code will
use the ordered search function. This change merges the two
functions and varies its behaviour based on the config setting,
such that all callers can simply call the one search function
and get the best behaviour.
An additional configuration option allows leading underscores to
be stripped from symbols being relocated in loaded objects. This
allows toolchains which prefix C symbol with underscores to make
loadable ELF objects.
mmcsd:Remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32h7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc remove CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
stm32f7:sdmmc WRITE COMPLETE prevent false triggers
stm32h7:sdmmc WRITE COMPLETE prevent false triggers
While testing PR #2989 on the H7 I noticed that the cards
were staying in 1-bit mode. The root cause was that the
scr read path was using DMA without an invlidate.
This was caused by CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT,
but the sdmmc driver, did not use the delayed invalidate
nor would it work on 8 bytes.
The driver fully supported dcache mgt on runt buffers, but
the #ifdef CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT blocked it.
Reviewing the PR that added CONFIG_ARCH_HAVE_SDIO_DELAYED_INVLDT
it may have been valid at the time. But after the dcache operations
we fixed. It is not necessary and offers no benefit.
Implement si_send/sendto/recvfrom with si_sendmsg/recvmsg, instead of
the other way round.
Change-Id: I7b858556996e0862df22807a6edf6d7cfe6518fc
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
it is wrong to define a new grpid_t, but not reuse pid_t,
because it make getpid(parent) == getppid(child) impossible.
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
since sometime platform code need do some special action during memcpy
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Id108ef4232376feab3e37e9b3aee9a7927a03bd4
Change the copyright header of assorted source files in libs/libc to the
ASF version. I was listed as the author in these files. I did also
check the heritage of those files and besides me they have only been
changed by the following people, all of whom did sign a CLA to the best
of my knowledge:
Alin Jerpelea
Haitao Liu
Gregory Nutt
Yamamoto Takashi
Xiang Xiao
Signed-off-by: Michael Jung <mijung@gmx.net>
This change reflects that the geometry isn't related to the largest
allocatable unit on the platform.
Calls to read and write block devices are also affected and have
been updated.
Summary:
- This commit introduces spinlock_t for #ifndef CONFIG_SPINLOCK
which is useful for the non-SMP case because it does not consume
memory
Impact:
- None:
Testing:
- N/A
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- This commit changes spinlock APIs (spin_lock_irqsave/spin_unlock_irqrestore)
- In the previous implementation, the global spinlock (i.e. g_irq_spin) was used.
- This commit allows to use caller specific spinlock but also supports to use
g_irq_spin for backword compatibility (In this case, NULL must be specified)
Impact:
- None
Testing:
- Tested with the following configurations
- spresnse:wifi, spresense:wifi_smp
- esp32-devkitc:smp (QEMU), sabre6-quad:smp (QEMU)
- maxi-bit:smp (QEMU), sim:smp
- stm32f4discovery:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
