Commit Graph

41656 Commits

Author SHA1 Message Date
chao.an
27dd771336 libc/execinfo: add backtrace support based on EABI Unwinder
1. Flags < -funwind-tables > is required
2. Keep the section ".exidx" in linker script

Signed-off-by: chao.an <anchao@xiaomi.com>
2021-04-19 04:45:04 -07:00
chao.an
58bd0468ab fs/inode: correct the return value
correct the return value of fs_getfilep() since the
semaphore take may probably fail if the thread canceled

Signed-off-by: chao.an <anchao@xiaomi.com>
2021-04-19 09:50:45 +01:00
Yuichi Nakamura
9061c997fc audio/pcm_decode.c: skip extra chunk of wav header
Summary:
- The wav header parser in /dev/audio/pcm device driver expects the 'data'
  chunk is placed just after the 'fmt ' chunk.
- Because the wav files generated by FFmpeg places 'LIST' chunk which
  contains the music track information between 'fmt ' and 'data' chunks,
  nxplayer cannot playback the files.
- This patch skips extra chunks after 'fmt ' chunk to find the 'data' chunk.

Impact:
- All architectures which support /dev/audio/pcm device.

Testing:
- Tested by Raspberry Pi Pico audio driver.
- nxplayer can playback the wav files which are created by FFmpeg after
  applying this patch.
2021-04-19 03:32:21 -05:00
YAMAMOTO Takashi
7f307f9765 sim: Restore stack alignemnt
Reapply the following commit [1], which has been reverted by
the recent change [2] with no obvious reasons.

Also, add a comment block to explain the calculation.

[1]
```
commit 298c2e5e4f
Author: YAMAMOTO Takashi <yamamoto@midokura.com>
Date:   Wed Jan 29 03:26:43 2020 +0900

    sim: Fix stack alignment

    The recent x86-64 convention requires 16-byte alignment before
    (not after) calling a function.

    This fixes snprintf crash I observed on macOS while saving XMM registers.
```

[2]
```
commit 2335b69120
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date:   Mon Apr 12 23:44:08 2021 +0800

    arch: Allocate the space from the beginning in up_stack_frame

    arch: Allocate the space from the beginning in up_stack_frame

    and modify the affected portion:
    1.Correct the stack dump and check
    2.Allocate tls_info_s by up_stack_frame too
    3.Move the stack fork allocation from arch to sched

    Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
```
2021-04-19 01:29:38 -05:00
Masayuki Ishikawa
64f46b7f7e arch: k210: Add coloration for the idle stacks
Summary:
- This commit adds coloration for the idle stacks

Impact:
- k210 only

Testing:
- Tested with smp and nsh configs with QEMU and dev board

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-19 01:09:22 -05:00
Masayuki Ishikawa
1e6fd0871f boards: maix-bit: Add _default_stack_limit to the linker script
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-19 01:09:22 -05:00
Masayuki Ishikawa
44bc681daa arch: fe310: Add coloration for the idle stack
Summary:
- This commit adds coloration for the idle stack
- Also, apply la pseudo-instruction instead of lui and addi

Impact:
- fe310 only

Testing:
- Tested with nsh with QEMU and dev board

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-19 01:05:40 -05:00
Masayuki Ishikawa
17149fbb38 boards: hifive1-revb: Add _default_stack_limit to the linker scripts
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-19 01:05:40 -05:00
Yuichi Nakamura
7fb73dba1c boards/raspberrypi-pico: Pico Audio Pack (I2S) support 2021-04-19 09:39:51 +09:00
Yuichi Nakamura
048802bcd2 arm/rp2040: Add RP2040 I2S driver 2021-04-19 09:39:51 +09:00
Yuichi Nakamura
41b193e07f arm/rp2040: Add RP2040 PIO APIs 2021-04-19 09:39:51 +09:00
Nathan Hartman
2c628cf858 ReleaseNotes: Improve organization and other minor fixes
Improve organization by sorting architectures and boards into alphabetical
order. Improve consistency of newlines between headings and contents. In
sections that include subsections for new features and bugfixes, list the
new features (or major/significant improvements) first, followed by
bugfixes. In Compatibility Concerns section, rewrap the lines and add
backticks around identifiers that should print in a fixed-width typeface.
2021-04-18 12:18:11 -05:00
Brennan Ashton
961e1bcfe7 documentation: Add release notes for 10.1.0 release 2021-04-18 08:57:39 +02:00
hotislandn
60b56121b6 boards:rv64:c906:add sotest demo for smartl-c906.
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-04-17 19:07:13 +01:00
David Sidrane
c3cbe673ad nucleo-h743zi:Use Serial RX/DX DMA 2021-04-17 09:56:41 +02:00
David Sidrane
c801de4201 stm32h7:Serial Add RX and TX DMA
stm32h7:Serial Use Idel to poll RX DMA

stm32h7:Serial Do not loop in an ISR!

stm32h7:Serial signal txdma completion with semaphore

stm32h7:Serial Apply formatting suggestions from code review

Co-authored-by: Mateusz Szafoni <raiden00pl@gmail.com>

stm32h7: Serail Add Power Managment (Untested)
2021-04-17 09:56:41 +02:00
Masayuki Ishikawa
65274d5fdf boards: lc823450-xgevk: Workaround to avoid an ostest crash with rndis
Summary:
- This is just a workaround to avoid a crash in signest_test
- The commit should be reverted once we find the root cause of the issue

Impact:
- None

Testing:
- Tested with ostest

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-16 03:53:13 -05:00
Xiang Xiao
2335b69120 arch: Allocate the space from the beginning in up_stack_frame
arch: Allocate the space from the beginning in up_stack_frame

and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-16 12:41:41 +09:00
Xiang Xiao
8640d82ce0 arch: Rename g_intstackbase to g_intstacktop
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-04-16 12:41:41 +09:00
Masayuki Ishikawa
97e6d35c3a drivers: wireless: Fix AT command response handling in gs2200m.c
Summary:
- When sending an AT command during receiving a bulk packet,
  the bulk packet might be put in the AT command response.
- To handle such the case, gs2200m_send_cmd2() is newly
  introduced instead of using gs2200m_send_cmd(dev, cmd, NULL)

Impact:
- All use cases that send an AT command in gs2200m.c

Testing:
- Tested with renew and nxplayer with spresense:wifi

Reported-by: Masatoshi Ueno <Masatoshi.Ueno@sony.com>
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-15 21:28:25 -05:00
David Sidrane
3feb3a247d stm32:Serial DMA config USART{4578} -> UART{4578} 2021-04-15 21:26:32 -05:00
hotislandn
d0c31f09e7 arch:rv64:c906:add configuration for kernel module test.
Signed-off-by: hotislandn <hotislandn@hotmail.com>
2021-04-15 11:04:51 -05:00
Alan C. Assis
33dfceb6ff Add more questions/answers to the FAQ 2021-04-15 08:11:54 -05:00
raiden00pl
0ada35faeb nucleo-g431rb: add support for IHM16M1 2021-04-15 06:38:39 -05:00
raiden00pl
25240d9114 boards/stm32/common: add support for IHM16M1 2021-04-15 06:38:39 -05:00
raiden00pl
5e59d3753a nucleo-g431rb: fixes for button 2021-04-15 06:38:39 -05:00
raiden00pl
82ce1de7cd stm32/stm32_foc: remove the debug message before the calibration start
For unknown reasons this message may interferre with the calibration
procedure and result in invalid calibariton data.
We leave only a message informing about the end of the the calibration.
The problem was observed for STM32G4 + IHM16M1.
2021-04-15 06:37:15 -05:00
raiden00pl
13f62d15cc stm32/stm32_foc: do not enable PWM outputs that are not in use 2021-04-15 06:37:15 -05:00
YAMAMOTO Takashi
d1307aa34f esp32-devkitc: Add a config to run apps/examples/sotest 2021-04-15 12:18:52 +01:00
YAMAMOTO Takashi
c62173375d esp32-devkitc: Add a config to run apps/examples/module
Right now, these seems to be no config in tree with
CONFIG_ARCH_USE_MODULE_TEXT.
2021-04-15 12:18:52 +01:00
YAMAMOTO Takashi
1748ca42cd esp32: Ensure the alignment of _smodtext 2021-04-15 12:18:52 +01:00
YAMAMOTO Takashi
3806803a7a arch/xtensa/src/esp32/esp32_user.c: Implement L16SI emulation
I don't know why this was not necessary before.
Probably I was just lucky about the combination of configs.
Or maybe some of recent changes happened to make the compiler
to use the instruction.

```
400d38f0 <mm_givesemaphore>:
400d38f0:       004136          entry   a1, 32
400d38f3:       228c            beqz.n  a2, 400d38f9 <mm_givesemaphore+0x9>
400d38f5:       0228            l32i.n  a2, a2, 0
400d38f7:       52cc            bnez.n  a2, 400d3900 <mm_givesemaphore+0x10>
400d38f9:       fea0b2          movi    a11, 254
400d38fc:       000306          j       400d390c <mm_givesemaphore+0x1c>
400d38ff:       00              .byte 00
400d3900:       019232          l16si   a3, a2, 2
400d3903:       feebe5          call8   400d27c0 <getpid>
400d3906:       0813a7          beq     a3, a10, 400d3912 <mm_givesemaphore+0x22>
400d3909:       05a1b2          movi    a11, 0x105
400d390c:       f241a1          l32r    a10, 400d0210 <_stext+0x1f0>
400d390f:       ff23e5          call8   400d2b4c <_assert>
400d3912:       1288            l32i.n  a8, a2, 4
400d3914:       0828a6          blti    a8, 2, 400d3920 <mm_givesemaphore+0x30>
400d3917:       880b            addi.n  a8, a8, -1
400d3919:       1289            s32i.n  a8, a2, 4
400d391b:       000606          j       400d3937 <mm_givesemaphore+0x47>
400d391e:       00              .byte 00
400d391f:       00              .byte 00
400d3920:       ffaf82          movi    a8, -1
400d3923:       015282          s16i    a8, a2, 2
400d3926:       00a082          movi    a8, 0
400d3929:       016282          s32i    a8, a2, 4
400d392c:       02ad            mov.n   a10, a2
400d392e:       feb125          call8   400d2440 <sem_post>
400d3931:       19a1b2          movi    a11, 0x119
400d3934:       fd4a96          bltz    a10, 400d390c <mm_givesemaphore+0x1c>
400d3937:       f01d            retw.n
400d3939:       000000          ill
```
2021-04-15 12:18:52 +01:00
YAMAMOTO Takashi
a28de1d681 arch/xtensa/src/esp32/esp32_user.c: Fix S16I/L16LU emulation
I misunderstood how imm8 is used to calculate the address.
2021-04-15 12:18:52 +01:00
raiden00pl
dd86fe5ca5 Kconfig: add missing DEBUG_MOTOR option 2021-04-15 11:12:58 +01:00
Anthony Merlino
b1f637a6ea stm32h7: Don't automatically select HSI48 as it may depend on USBSEL.
Add preprocessor logic that can catch the condition where the board is selecting the HSI48 as the USBSEL source, but the HSI48 isn't enabled.
2021-04-15 02:00:37 -07:00
Anthony Merlino
4c8d70dd2e stm32h7: Initialize CSI and HSI48 clocks as needed based on enabled peripherals. 2021-04-15 02:00:37 -07:00
Marco Krahl
05b889457e 1wire: Removes duplicate device information
Removes the family identifier from the device configuration, since the device
family is already part of the rom code and the underlying logic does know how
to extract this information.

include/nuttx/1wire drivers/sensors

stm32f103-minimim

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>
2021-04-15 02:28:42 -05:00
YAMAMOTO Takashi
51490bad55 modlib: Implement sh_addralign handling
I've seen a module with 16 bytes .rodata alignment for xmm operations.
It was getting SEGV on sim/Linux because of the alignment issue.
The same module binary seems working fine after applying this patch.

Also, tested on sim/macOS and esp32 on qemu,
using a module with an artificially large alignment. (64 bytes)
2021-04-14 21:17:07 -05:00
jturnsek
7813b4f88a Refreshing default configs 2021-04-14 14:57:26 -07:00
jturnsek
61b0e530b0 Default config without flexspi and mtd 2021-04-14 14:57:26 -07:00
jturnsek
c12ccfc80b Copy .ARM.exidx together with .text to make linker happy 2021-04-14 14:57:26 -07:00
jturnsek
e32d186739 Removing MMCEN pin setting from LPSPI1 2021-04-14 14:57:26 -07:00
jturnsek
e250006b1e FlexSPI NOR missing config and pin iomux 2021-04-14 14:57:26 -07:00
jturnsek
0c4d66dcf0 FlexSPI NOR driver added 2021-04-14 14:57:26 -07:00
jturnsek
2f92ecc7d6 Fixed comment lengths 2021-04-14 14:57:26 -07:00
jturnsek
a4857d78b9 Removing some none existing initialization. 2021-04-14 14:57:26 -07:00
jturnsek
f5d22ccd03 Change ALL copyright from Greg and David to apache since they already sign SGA or ICLA 2021-04-14 14:57:26 -07:00
jturnsek
4e50ba14e8 Removing some none existing configurations from the default 2021-04-14 14:57:26 -07:00
jturnsek
33b071ecb9 MIMXRT1064-EVK support 2021-04-14 14:57:26 -07:00
Gustavo Henrique Nihei
0030c2020f boards/esp32-wrover-kit: Remove deprecated README documentation 2021-04-14 16:29:32 -03:00