Commit Graph

41656 Commits

Author SHA1 Message Date
Raman Gopalan
649e680f75 avr32dev1: Suppress linker error: Placeholder for board_app_initialize() 2021-05-06 11:25:38 -03:00
Raman Gopalan
9044594545 at32uc3_gpioirq.c: Fix typo: contex -> context 2021-05-06 11:25:38 -03:00
Julian Oes
644a0cd525 drivers/serial: fix Rx interrupt enable for cdcacm
This is addressing an issue where Rx interrupts were not restored for
cdcacm after the buffer had been filled (in a burst).
The Rx interrupts were only restored after the watchdog timeout of 200ms
fired.

This happened because CONFIG_SERIAL_RXDMA was set, however, for the
cdcacm driver this does not actually matter as it is relying on
uart_enablerxint to be called via the ops table.

This patch makes sure that uart_enablerxint and uart_disablerxint are
always called, independent of CONFIG_SERIAL_RXDMA, relying on the ops
table to be correct for the case where it should be only a no-op.
2021-05-06 06:49:07 -07:00
Gustavo Henrique Nihei
886009f15f tools/nxstyle: Add _Atomic keyword to whitelisted words 2021-05-06 06:48:59 -07:00
Max Kriegleder
8bcef02324 boards/nucleo-h743zi2: added netnsh config 2021-05-05 18:21:44 -03:00
Gustavo Henrique Nihei
87eb84ad73 nuttx/spi: Apply some fixes to SPI Slave documentation 2021-05-05 16:56:07 -03:00
Gustavo Henrique Nihei
534c058d93 spi: Adopt CPHA as the abbreviation for clock phase 2021-05-05 16:56:07 -03:00
David Sidrane
92dba32c8c stm32h7:Allow for reuse of the OTG_ID GPIO
Currently Nuttx doesn't seem to be any real support for OTG.
    In the future when OTG is supported. This Knob can be removed
    and drivers can enable their pin sets based on CONFIG_OTG.
    (Adding CONFIG_OTG at this time would be misleading.)
2021-05-05 12:22:11 -04:00
David Sidrane
cd603af958 stm32f7:Allow for reuse of the OTG_ID GPIO 2021-05-05 12:22:11 -04:00
David Sidrane
8624f9a444 s32k1xx:flexcan Use inttypes in printing macro 2021-05-05 06:07:50 -07:00
David Sidrane
7fb59e4f36 kinetis:flexcan Use inttypes in printing macro 2021-05-05 06:07:50 -07:00
David Sidrane
e5ceb062f9 stm32f7:Use inttypes in printing macro
stm32f7:SDMMC Use inttypes in printing macro

stm32f7:CAN Use inttypes in printing macro

stm32f7:DMA Use inttypes in printing macro

stm32f7:serial fix compile error from UNUSED() change
2021-05-05 06:07:50 -07:00
David Sidrane
cbe3e120d5 stm32h7:Use inttypes in printing macros 2021-05-05 06:07:50 -07:00
Jukka Laitinen
9b8399effe lib_modfl: Use fabsl instead of fabs for long double arguments
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2021-05-05 06:05:58 -07:00
raiden00pl
a74ea51aae drivers/timers/pwm.c: fix compilation warnings 2021-05-05 09:32:58 -03:00
raiden00pl
b721ba05aa stm32_pwm.c: fix compilation warnings 2021-05-05 09:32:58 -03:00
raiden00pl
7cb7fe3f38 stm32_pwm: fixes for PULSECOUNT support
1. generate an indefinite number of pulses when info->count = 0
2. timers that don't support pulse-count shouldn't use pulse-count logic
2021-05-05 09:32:58 -03:00
Sara Souza
873293cc3f xtensa/esp32: Applies REG_MASK to extract a field value 2021-05-05 01:30:03 -07:00
Sara Souza
50daf24242 esp32/esp32-c3: Adds two helpers to extract and include a field value 2021-05-05 01:30:03 -07:00
Sara Souza
cce42d5f74 xtensa/esp32: Reorganize the pins initialization and adds showprogress in __start 2021-05-05 01:30:03 -07:00
Sara Souza
afd6b26232 xtensa/esp32: Replace serialout/in and fixes the fifo counter issue 2021-05-05 01:30:03 -07:00
Abdelatif Guettouche
f3a6d80c95 esp32c3/hardware: Include files of the same level by their names only and
remove unnecessary includes.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-05-05 01:28:22 -07:00
Abdelatif Guettouche
e24af207f8 esp32/hardware: Include files of the same level by their names only and
remove unnecessary includes.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-05-05 01:28:22 -07:00
raiden00pl
7b53a5fe1c stm32_adc.c: rename a struct member in struct adccmn_data_s from 'initialized' to 'refcount' 2021-05-05 01:27:56 -07:00
raiden00pl
3fb78a8299 drivers: move the generic upper-half motor driver from drivers/power to drivers/motor 2021-05-05 09:00:22 +02:00
Sara Souza
b01ddef61b risc-v/esp32-c3: Adds freerun wrapper 2021-05-04 15:22:26 -03:00
Brennan Ashton
2c91805d8f boards/stm32f7: Add i2c and mpu60x0 support to nucleo-144 2021-05-04 10:17:44 -03:00
Brennan Ashton
e155af891a sensor: Fix bad bit mask macro in mpu60x0 2021-05-04 10:17:44 -03:00
David Sidrane
22b719945f fs:cromf Use inttypes in printing macros 2021-05-04 09:40:51 +01:00
David Sidrane
8f8befaa25 mtd:ramtron Use inttypes in printing macros 2021-05-03 16:58:47 -04:00
David Sidrane
a61f70d571 inet:sockif Fix warning 2021-05-03 16:55:48 -04:00
Nathan Hartman
8efec13ab0 drivers/motor - Fix CFLAGS path
* drivers/motor/Make.defs b/drivers/motor/Make.defs:
  Fix typo in MOTOR_CFLAGS path (motr -> motor)
2021-05-03 12:23:54 -07:00
Abdelatif Guettouche
1ea25a83fe tools/esp32/mk_qemu_img.sh: Group the offsets in variables. 2021-05-03 11:11:32 -03:00
Abdelatif Guettouche
f08aa47927 tools/esp32/mk_qemu_img.sh: Refactor the dd commands and suppress all the
status output.

Signed-off-by: Abdelatif Guettouche <abdelatif.guettouche@espressif.com>
2021-05-03 11:11:32 -03:00
Max Kriegleder
d1d4237ac7 boards/nucleo-h743zi2: Fixed pin and color of board LED LD2 2021-05-01 21:25:59 -07:00
Michal Lenc
2dcd41f2ab boards/arm/stm32/nucleo-f446re: added support for PWM
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2021-05-01 15:18:24 -03:00
Gustavo Henrique Nihei
4f08f43a6d boards/esp32c3-devkit: Increase MAX_TASKS to 16 on nsh/ostest configs
This fixes the barrier test from ostest application
2021-04-30 17:55:30 +01:00
Gustavo Henrique Nihei
7ded22fb1a risc-v/k210: Fix SMP interrupt stack size calculation 2021-04-29 19:39:17 -07:00
Gustavo Henrique Nihei
e0da0bf6bd arch/risc-v: Fix interrupt stack alignment 2021-04-29 19:39:17 -07:00
Gustavo Henrique Nihei
f8a36f10c3 arch: Uniformize optimization flag setting across architectures 2021-04-29 19:17:16 -07:00
Gustavo Henrique Nihei
abf039b744 risc-v/rv32im: Set MAXOPTIMIZATION regardless of any debug options 2021-04-29 19:17:16 -07:00
Alan C. Assis
0a0a034a3f esp32: replace EPS32 typo with ESP32 2021-04-29 18:03:05 -03:00
Juha Niskanen
07cde736bd arch: fix some printf format errors 2021-04-29 19:16:56 +01:00
Alexander Vasiljev
940c5b69c3 stm32h7: serial: use dma tx semaphore as resource holder 2021-04-29 03:19:44 -07:00
Masayuki Ishikawa
f4089ab528 boards: sim: Remove CONFIG_NETDEV_IFINDEX=y
Summary:
- This commit fixes the warnings reported by the CI

Impact:
- None

Testing:
- Build only

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2021-04-29 03:20:43 -05:00
Gregory Nutt
7332d2decf net/: Add missing packet filtering checks
NuttX provides the UDP_BINDTODEVICE socket option.  This is a UDP protocol-specific implementation of the semi-standard Linux SO_BINDTODEVICE socket option:  "SO_BINDTODEVICE forces packets on the socket to only egress the bound interface, regardless of what the IP routing table would normally choose. Similarly only packets which ingress the bound interface will be received on the socket, packets from other interfaces will not be delivered to the socket." https://codingrelic.geekhold.com/2009/10/code-snippet-sobindtodevice.html

If CONFIG_NET_UDP_BINDTODEVICE is selected and a UDP socket is bound to the device, then unrecognized packets UDP packets must not be dropped, but must be forwarded along to the bound socket unconditionally.

It the typical case, this should have no impact.  It does effect the applications that use DHCP and do select the UDP_BINDTODEVICE socket option.

This PR replace existing improper logic in the code and also the improper attempts to fix problems from PR #3601 and PR #3598.  Those changes are improper because they expose DHCP appliction dependencies in the OS, breaking modularity and independence of the OS and application.

Tested with stm32f4discovery:netnsh with CONFIG_NET_UDP_BINDTODEVICE.  A proper DHCP test setup is needed, however.
2021-04-29 12:47:02 +08:00
Gregory Nutt
27e0725a4e Remove CONFIG_NET_UDP_BINDTODEVICE from DHCPC configurations
CONFIG_NET_UDP_BINDTODEVICE is now selected by default if DHCPC is enabled.

This change will not build without apps PR 696
2021-04-28 21:22:40 -05:00
Nathan Hartman
26f09cec6d Documentation: Fix a few typos.
* Documentation/contributing/documentation.rst
    * Documentation/guides/tasktraceuser.rst
    * Documentation/guides/drivers.rst
    * Documentation/quickstart/running.rst
    * Documentation/quickstart/compiling.rst
    * Documentation/components/drivers/character/watchdog.rst
    * Documentation/components/drivers/character/foc.rst
    * Documentation/components/nxgraphics/nxtk.rst
    * Documentation/applications/nsh/login.rst
    * Documentation/introduction/detailed_support.rst
    * Documentation/introduction/resources.rst
    * Documentation/reference/user/01_task_control.rst
    * Documentation/reference/os/wqueue.rst

      Fix some misspelled words.

      Many of these were caught by codespell.
2021-04-28 17:00:23 -03:00
Dong Heng
fcd5648bca riscv/esp32c3: Fix SPI Flash driver internal chip data address error
"g_rom_flashchip" is not in fixed address between all ESP32-C3's different versions.
2021-04-28 09:58:16 -05:00
Gustavo Henrique Nihei
edeb16123b risc-v/esp32c3: Uniformize alignment for assembly instructions 2021-04-28 09:55:57 -05:00