Gregory Nutt
ded44679e9
Add option to enable stackcheck per architecture
2015-04-12 06:30:24 -06:00
Gregory Nutt
068fc43170
Revert commit b80e8be652dfa52e97daa65aa3e550cf31cb2409
2015-04-12 06:26:50 -06:00
Gregory Nutt
63c0de86fe
Remove all traces of CONFIG_ARMV7M_STACKCHECK
2015-04-11 10:01:44 -06:00
Gregory Nutt
2a9cc61223
STM32 changes from David Sidrane
2015-04-11 07:19:20 -06:00
Gregory Nutt
eed7cc66ad
STM32 CAN: More places where FR instead FIR used
2015-04-09 19:30:19 -06:00
Gregory Nutt
3840c2a14b
Fix several typos in comments
2015-04-09 16:13:03 -06:00
Gregory Nutt
9ab439de6c
apps/examples/ostest: Add a test for the sigprocmask, sighold, and sigrelse
2015-04-09 15:53:59 -06:00
Gregory Nutt
c49f7a8e87
Missing i found by David Sidrane
2015-04-09 15:16:05 -06:00
Gregory Nutt
2aa80e06f5
Remove executable flag from more .c and .h files
2015-04-09 08:20:57 -06:00
Gregory Nutt
2c53894065
Cosmetic
2015-04-09 07:59:31 -06:00
Gregory Nutt
e113be1bff
SAMA5 Serial: Reading IMR and disabling interrupt must be atomic
2015-04-08 15:27:31 -06:00
Gregory Nutt
2a9bd3ad73
SAM3/4 and SAMV7 UART: The IMR register is read-only. This means that sam_restoreints() does not actually re-enable UART interrupts.
2015-04-08 15:04:10 -06:00
Gregory Nutt
98b0659abf
SAMA5 Serial: Fix a couple of errors backporting termios and flowcontrol
2015-04-08 14:35:04 -06:00
Gregory Nutt
662757c77a
SAM3/4 and SAMV7 Serial: Serial interrupts left disabled.
...
A side-effect of changing serial settings via TERMIOS (such as tcsetattr) is that serial interrupts were being left disabled. This is not a problem if the serial configuration is changed when there are no open references to the serial device. In that case, serial interrupts are disabled and will not be enabled enabled until the serial device is first opened. But it is fatal if the serial device is already opened and if there is a task waiting to receive data. In that case, the side-effect of disabling interrupts is fatal: That task is then left hanging with interrupts disabled.
2015-04-08 14:14:01 -06:00
Gregory Nutt
0a635653c2
SAMA5D Serial: Backup support for flowcontrol and termios from SAM3/4 -- UNVERIFIED
2015-04-08 14:13:08 -06:00
Gregory Nutt
16814e2b00
Make some file section headers more consistent with standard
2015-04-08 08:04:12 -06:00
Gregory Nutt
190c9adef0
Implements CONFIG_TIME_EXTENDED as we discussed relative to providing the last 3 members of the tm struct and support for filling them in and even using the wday in the STM32 RTC. From David Sidrane.
2015-04-08 06:56:43 -06:00
Gregory Nutt
0bebd62bc0
STM32: Another fix to RTC magic register from David Sidrane
2015-04-06 17:21:53 -06:00
Gregory Nutt
c12c253cc6
Add conditional logic so that people who use F1 don't have to be bother with meaningless RTC MAGIC settings
2015-04-06 16:35:56 -06:00
Gregory Nutt
4d5cb13c9d
STM32 RTCC: Make back-up register and magic value used by RTCC configurable. From David Sidrane
2015-04-06 16:26:59 -06:00
Gregory Nutt
6058d3dc73
Typo fixes from David Sidrane
2015-04-06 15:27:37 -06:00
Gregory Nutt
65d9d18159
Minor changes to SAMV7 USB register definition file from review
2015-04-06 13:00:48 -06:00
Gregory Nutt
0c40f93c42
SAMV7 USB device: Finish option to force full speed mdoe
2015-04-06 10:07:12 -06:00
Gregory Nutt
9487f4628f
Calypso: SPI built only if CONFIG_SPI
2015-04-05 13:26:25 -06:00
Gregory Nutt
fca4c51420
Update comments and README
2015-04-05 07:22:46 -06:00
Gregory Nutt
cf4bbae526
SAMV7: Fix SDRAM initialization instabiilties by changing the order of initialization
2015-04-04 19:58:31 -06:00
Gregory Nutt
c1886c6181
SAMV7: Apparently the data sheet is wrong, SDRAM clocking must be enabled at the PMC or the SDRAM does not work! The data sheet says that there is no clock control for SDRAMC
2015-04-04 19:04:29 -06:00
Gregory Nutt
8aeaff1e95
SAMV7: Fix a errort in GPIO bit encoding. Correct naming of a variable
2015-04-04 16:54:53 -06:00
Gregory Nutt
fda98ebeab
SAMV7: Fix typo in some GPIO definitions
2015-04-04 14:04:58 -06:00
Gregory Nutt
02beb0d449
More renaming: up_lcdinitialize->board_lcd_initialize, up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize
2015-04-04 11:49:15 -06:00
Gregory Nutt
0cf5088475
SAMV71-XULT ILI9488 LCD driver is code complete but untested
2015-04-03 16:36:58 -06:00
Gregory Nutt
b72cf3366c
SAMV7: Add SMC register definition header file; SAMV71-Xult: Add an LCD driver. The initial commit is simply the SAVM4E-EK ILI9375 driver will bogus name changes to ILI9488.
2015-04-03 10:28:32 -06:00
Gregory Nutt
0ec67181c9
Move include/nuttx/timer.h, rtc.h and watchdog.h to include/nuttx/timers/.
2015-04-01 12:37:44 -06:00
Gregory Nutt
cf95d1a995
rch_tcinitialize() and arch_tcunitinitialize() renamed to board_tsc_setup() and board_tsc_teardown(). These are not long called directly by applications but only indirectly throught the crappy boardctl() OS interface.
2015-03-31 13:21:25 -06:00
Gregory Nutt
eb21ad0cf2
SAMV71-XULT: Add option to support connection of the maXTouch Xplained Pro on the 50-pin LCD connector
2015-03-31 09:01:38 -06:00
Gregory Nutt
8aa133029f
SAMV7 Ethernet: Fix a write-past-end-of-buffer and trash-the-heap problem
2015-03-29 16:45:05 -06:00
Gregory Nutt
f1c79423e1
The STM32F4Discovery board doesn't come with a Low speed external oscillator so the default LSE source for the RTC doesn't work.
...
In stm32_rtcc.c the up_rtcinitialize() logic doesn't work with the LSI. The check on RTC_MAGIC on the BK0R register lead to rtc_setup() call that rightfully enables the lsi clock; but the next times, when the rtc is already setup, the rtc_resume() call does NOT start the lsi clock!
The right place to put LSE/LSI initialisation is inside stm32_stdclockconfig() in stm32fxxxxx_rcc.c. Doing this I checked the possible uses of the LSI and the LSE sources: the LSI can be used for RTC and/or the IWDG, while the LSE only for the RTC (and to output the MCO1 pin)..
This change is not verifed for any other platforms.
From Leo Aloe3132
2015-03-29 15:34:48 -06:00
Gregory Nutt
dab3dbc75b
Cortex-M7: Add support for enabled the D-Cache in write only mode.
...
SAMV7 Ethernet: I- and D-Cache are now enabled in the netnsh/ configuration. D-Cache is enabled in write-though mode. This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
2015-03-29 14:42:03 -06:00
Gregory Nutt
4593fe3797
SAMV7/Cortex-M7: Add support for write through D-Cache. SAMV7 Ethernet look like it needs this
2015-03-29 13:09:22 -06:00
Gregory Nutt
c221547be4
PIC32MZ Ethernet: Add support for LAN4720A and fix IRQ namespace. From Kristopher Tate
2015-03-29 07:18:17 -06:00
Gregory Nutt
e8b232fc41
PIC32MZ: Correct the base address of Ethernet registers. From Kristopher Tate
2015-03-29 07:15:29 -06:00
Gregory Nutt
6b3c199d9f
PIC32MZ: Rename Ethernet files to proper convention. From Kristopher Tate.
2015-03-29 07:10:13 -06:00
Gregory Nutt
a60fa12e86
Clean up pointer handling to make code more readability. This re-introduces the compiler optimization problem but this is the correct thing to do. I will have to drop back from -Os to -O2.
2015-03-28 14:46:35 -06:00
Gregory Nutt
d2fd139ebc
SAMV7 EMAC: Fix alignment issue: RX buffers need to be invalidated. This means the alignment of buffers must be at least to the data cache line size at both ends of the buffer
2015-03-28 13:09:01 -06:00
Gregory Nutt
d7dbdfef58
SAMV7 EMAC: Sometimes TX is not started when TSTART is set??? Workaround seems to be to set it twice. Restored full optimization. Also CONFIG_NET_NOINTS is set so that interrupt level provessing is avoided
2015-03-28 09:42:45 -06:00
Gregory Nutt
79734c3c13
SAMV7 Ethernet: Fix some errors in circular queue handling
2015-03-27 13:04:43 -06:00
Gregory Nutt
72c923ff0b
Fix another typo in the modified assertion logi
2015-03-27 13:02:46 -06:00
Gregory Nutt
ee506c42f5
Fix a typo in the last commit
2015-03-27 10:58:52 -06:00
Gregory Nutt
66670c1738
SAMV7 Ethernet+USB Updates
2015-03-27 10:47:03 -06:00
Gregory Nutt
459bf9e885
ARMv7-M: Add logic to dump all stack usage on a crash
2015-03-27 10:45:39 -06:00
