sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
28,967 Commits 1 Branch 0 Tags 291 MiB
e180522854
Commit Graph

10248 Commits

Author SHA1 Message Date
Jussi Kivilinna
e180522854 stm32f7: serial: add interface to get uart_dev_t by USART number, stm32_serial_get_uart 2017-04-06 08:41:41 -06:00
Alan Carvalho de Assis
95941b4908 STM32: Fix SYSCFG_CFGR1_I2C_PBXFMP_SHIFT value 2017-04-06 08:35:33 -06:00
Juha Niskanen
3e6b92d5fa tm32: stm32l15xxx_rcc: configure medium performance voltage range and zero wait-state when allowed by SYSCLK setting 
Zero wait-state for flash can be configured when:
 Range 1 and SYSCLK <= 16 Mhz
 Range 2 and SYSCLK <= 8 Mhz
 Range 3 and SYSCLK <= 4.2 Mhz

Medium performance voltage range (1.5V) can be configured when SYSCLK is up to 16 Mhz and PLLVCO up to 48 Mhz.
 2017-04-05 07:41:25 -06:00
Juha Niskanen
bff341fdfc stm32: stm32l15xx_rcc: add support for using MSI as system clock 2017-04-05 07:41:24 -06:00
Juha Niskanen
9a29b9a327 stm32: stm32_flash: add EEPROM writing for STM32L15XX 2017-04-04 07:38:49 -06:00
no1wudi
8fbd8b9e6f STM32:add I2C3 SDA pin mapping for STM32F411 2017-04-04 11:57:45 +08:00
no1wudi
730b674b01 STM32:add I2C3 SDA pin mapping for STM32F411 2017-04-04 11:50:58 +08:00
Juha Niskanen
e320e5c100 STM32: add STM32L162VE to chip.h 2017-04-03 07:59:11 -06:00
Juha Niskanen
3a6bd901e4 stm32: fix IWDG and WWDG debug mode stop for STM32L15XX 2017-04-03 07:45:09 -06:00
Gregory Nutt
fb42844788 STM32: Fix a comment 2017-04-02 12:32:20 -06:00
David Sidrane
97fa617c89 stm32f7:stm32_sdmmc removed stray semicolon 2017-03-31 13:17:34 -10:00
David Sidrane
fbb6cfc79c stm32f7:Serial fix for dropped data 
1) Revert the inherited dma bug from the stm32
     see df9ae3c13f
     for details.

  2) Most all CR1-CR3 settings can not be configured while UE
     is true. Threfore we make all operation atomic and disable
     UE and restore it's originalstate on exit.
 2017-03-31 13:17:34 -10:00
Jussi Kivilinna
41912ed98c STM32F7: add support for LSE RTC and enable RTC subseconds 2017-03-31 10:13:40 -06:00
Gregory Nutt
7b789f57ac Review of previous commit 2017-03-30 12:28:40 -06:00
Konstantin Berezenko
95cbbf552b Change STM32 tickless to use only one timer 2017-03-30 10:40:05 -07:00
Juha Niskanen
5577f58458 STM32 RNG: Fix semaphore initial value and disable priority inheritance 2017-03-29 07:12:19 -06:00
Juha Niskanen
9f3b24a4a1 STM32 F7: add stm32 RNG support. This is copied from stm32l4. Tested on STM32F746ZG board. 2017-03-29 07:08:10 -06:00
Gregory Nutt
92da8068ed Merge branch 'master' of bitbucket.org:nuttx/nuttx 2017-03-26 06:57:35 -06:00
Mateusz Szafoni
62f9ae0852 Merged in raiden00/nuttx (pull request #300) 
STM32 COMP cosmetics

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-26 12:21:32 +00:00
raiden00pl
f3367233b6 stm32_comp.c: typo 2017-03-26 09:36:53 +02:00
raiden00pl
c1090164f5 stm32/Kconfig: update COMP and OPAMP definitions 2017-03-26 09:34:17 +02:00
raiden00pl
6594c65a77 stm32_comp.c: cosmetic 2017-03-26 09:30:23 +02:00
Gregory Nutt
7d57a2b2bd Trivial changes from review of last PR. 2017-03-25 10:38:41 -06:00
Mateusz Szafoni
c174074dd8 Merged in raiden00/nuttx (pull request #299) 
Add COMP character driver

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-25 16:29:02 +00:00
Gregory Nutt
602546f852 Minor typo fix 2017-03-25 10:23:53 -06:00
raiden00pl
a806aedb13 STM32F33: Support for COMP character driver 2017-03-25 16:57:43 +01:00
Alexander Oryshchenko
61ff3c6b84 I needed to use DS3231, I remember that in past it worked ok, but now for stm32f4xx is used another driver (chip specific, stm32f40xxx_i2c.c) and DS3231 driver doesn't work. After investigating a problem I found that I2C driver (isr routine) has a few places there it sends stop bit even if not all messages are managed. So, e.g., removing stm32_i2c_sendstop (#1744) and adding stm32_i2c_sendstart after data reading helps to make DS3231 working. Verified by David Sidrane. 2017-03-24 06:44:33 -06:00
Aleksandr Vyhovanec
82a84a8d98 Merged nuttx/nuttx into master 2017-03-24 11:40:09 +03:00
no1wudi
4c6680df99 Merged in no1wudi/nuttx (pull request #291) 
fix compile error when disabled the flash data cache corruption for stm32 f1xx

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-03-24 00:58:26 +00:00
no1wudi
fd76a3db05 fix spacing 2017-03-24 08:52:46 +08:00
no1wudi
5797e84893 Merged nuttx/nuttx into master 2017-03-24 08:40:40 +08:00
David Sidrane
66910577be stm322_flash:missing unlock on F1 HSI off path 2017-03-23 14:22:45 -10:00
David Sidrane
7e3bec635b stm32_i2c_alt:Move def of regval to top func def per CS 2017-03-23 11:50:37 -10:00
David Sidrane
d25f8710d2 stm32f40xxx_i2c:Duplicate non CS dev of regval 2017-03-23 11:37:12 -10:00
David Sidrane
f5cf22d871 stm32_i2c_alt:Duplicate non CS dev of regval 2017-03-23 11:36:44 -10:00
David Sidrane
c2a1b719be stm32_flash:Need conditinal on non F4 targets 2017-03-23 11:33:32 -10:00
rg
9353ca6039 STM32 I2C: Do not allow CONFIG_I2C_POLLED and CONFIG_I2C_DMA 2017-03-23 11:24:18 -06:00
Aleksandr Vyhovanec
06af125e45 The interrupt occurs over the counter overflow 2017-03-23 17:34:45 +03:00
no1wudi
45f5d30e2e fix compile error when disabled the flash data cache corruption for stm32 f1xx 2017-03-23 13:38:26 +08:00
David Sidrane
c73b65c9b9 stm32f7:stm32_allocateheap.c There are 5 configurations 2017-03-22 23:56:54 +00:00
Gregory Nutt
3fb0a00c35 Small changes from review of last PR. Plus spacing and typo fix. 2017-03-22 17:32:52 -06:00
Gregory Nutt
947acd6c1a Small changes from review of last PR 2017-03-22 15:53:12 -06:00
José Roberto de Souza
b9b4f184a7 stm32: Add workaround for flash data cache corruption on read-while-write 
This is a know hardware issue on some STM32 see the errata of your model
and if you make use of both memory banks you should enable it.
 2017-03-22 13:14:19 -07:00
José Roberto de Souza
09f70c462d stm32: Make up_progmem thread safe 
Writing to a flash sector while starting the erase of other sector
have a undefined behavior so lets add a semaphore and syncronize
access to Flash registers.

But for the semaphore to work it needs to be initialized so each
board needs call stm32_flash_initialize() on initialization, so
to avoid runtime problems it is only using semaphore and making
it thread safe if initialized, after all boards starts to call
stm32_flash_initialize() we can remove the boolean and the check.
 2017-03-22 13:14:15 -07:00
José Roberto de Souza
80f56e75f9 stm32: Fix erase sector number for microcontrolers with more than 11 sectors 
Erase a sector from the second bank cause the bit 4 of SNB being set
but never unsed, so trying to erase a sector from the first bank
was acually eraseing a sector from the second bank.
 2017-03-22 12:42:20 -07:00
David S. Alessio
7f2c4c4274 XMC4xxx: Add FPU support 2017-03-22 12:04:32 -06:00
Gregory Nutt
3f3aa73b8f XMC4xxx: USIC SCTR register, appears taht both WLE and FLE fields hold value - 1. 2017-03-21 17:51:55 -06:00
Gregory Nutt
ea93357a1e XMC4xxx: Fix a typo in the SCU header file 2017-03-21 17:05:47 -06:00
rg
82a5dfddb4 The attached .patch implements DMA support for the stm32f4 I2C. Max and I have verified that it works on our systems. 2017-03-21 16:44:11 -06:00
Gregory Nutt
343f7ceab2 XMC4xxx: Misc clock clean-up; PBDIV should be controllable from board.h 2017-03-21 15:05:17 -06:00