Reuse the reserved fields of hci buffer to avoid redundant packet type splitting
Change-Id: I79d70ae939111bb909a6e0981c50e401734590f2
Signed-off-by: chao.an <anchao@xiaomi.com>
Modify the default configuration in KConfig.
Sync latest commit from mainline.
Remove unused demo configuration
fixup bl602 nsh defconfig cause CICD failed
Rebase from mainline code
Summary:
- This commit replaces SHES related headers under cxd56xx
Impact:
- No impact
Testing:
- Build check only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
nuttx.rel: In function `rpmsg_serialinit':
nuttx/arch/sim/src/sim/up_rptun.c:257: undefined reference to `uart_rpmsg_init'
collect2: error: ld returned 1 exit status
Makefile:310: recipe for target 'nuttx' failed
Change-Id: I93a20941bc07f749165dc8f012da46ddb7b02b00
Signed-off-by: dongjiuzhu <dongjiuzhu1@xiaomi.com>
Summary:
- This commit adds imx_enet driver derived from imxrt_enet
Impact:
- imx6 only
Testing:
- Tested with sabre-6quad:netnsh
- NOTE: telnetd works with QEMU
Summary:
- This commit fixes peripheral IP offsets in AIPS-2
Impact:
- No impact because there is no drivers
Testing:
- Tested with sabre-6quad:nsh and sabre-6quad:smp
wget is missing from some system (like macOS and Windows native),
it's better to use curl to simplify build environment.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Summary:
- During repeating ostest with sabre-6quad:smp (QEMU),
I noticed that pthread_rwlock_test sometimes stops
- Finally, I found that nxtask_exit() released a critical
section too early before context switching which resulted in
selecting inappropriate TCB
- This commit fixes this issue by moving nxsched_resume_scheduler()
from nxtask_exit() to up_exit() and also removing
spin_setbit() and spin_clrbit() from nxtask_exit()
because the caller holds a critical section
- To be consistent with non-SMP cases, the above changes
were done for all CPU architectures
Impact:
- This commit affects all CPU architectures regardless of SMP
Testing:
- Tested with ostest with the following configs
- sabre-6quad:smp (QEMU, dev board), sabre-6quad:nsh (QEMU)
- spresense:wifi_smp
- sim:smp, sim:ostest
- maix-bit:smp (QEMU)
- esp32-devkitc:smp (QEMU)
- lc823450-xgevk:rndis
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
When the architectural support for STM32G4 family was added, the
reference manual (RM0440) was at revision 2. Since then, it has
undergone several revisions. One significant change is in the
table of FLASH wait states: section 3.3.3 table 9. The outcome
of this change is that fewer FLASH wait states are needed for
most CPU clock (HCLK) frequencies. Notably, if running the CPU
clock at the maximum 170 MHz, only 4 FLASH wait states are
needed, rather than the previously programmed 8 wait states.
This gives a noticeable performance boost.
arch/arm/src/stm32/stm32g4xxxx_rcc.c:
* FLASH_ACR_LATENCY_SETTING: Reimplement compile-time logic
that selects the required wait state setting to use the new
updated table.
* Update all comments to indicate that RM0440 Rev 5 is used.
* Update section numbers mentioned in comments in cases where
they have changed due to added sections in the manual.
