sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
15618613ab
nuttx/arch/arm/src/sam34
History
Gregory Nutt e2bde7037f Fix a compilation error. From Macs Neklyudov
2015-02-16 14:30:15 -06:00
..
chip SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
chip.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
Kconfig Remove and extra endif from the Kconfig 2015-02-03 12:46:40 -06:00
Make.defs SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam3u_gpio.h SAM4E: Add support for PIO and peripheral clocks 2014-02-21 12:34:04 -06:00
sam3u_periphclks.h Rename sam3u_pmc.h to sam_pmc.h since it handles all of the SAM3/4 chips 2014-02-22 10:38:25 -06:00
sam3x_gpio.h SAM4E: Add support for PIO and peripheral clocks 2014-02-21 12:34:04 -06:00
sam3x_periphclks.h SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
sam4cm_freerun.c SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_freerun.h SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_gpio.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_oneshot.c SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_oneshot.h SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_periphclks.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_supc.c Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_supc.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4cm_tc.c SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_tc.h SAM4CM: Add support for tickless operation 2015-02-03 07:00:54 -06:00
sam4cm_tickless.c Fix a compilation error. From Macs Neklyudov 2015-02-16 14:30:15 -06:00
sam4e_gpio.h SAM4E: Pin multiplex definition header file 2014-02-21 18:10:53 -06:00
sam4e_periphclks.h SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
sam4l_clockconfig.c Add support for the SAM4L Xplained Pro I/O1 module 2013-06-15 10:56:08 -06:00
sam4l_gpio.c Fixes for more issues found by cppcheck 2014-11-24 17:00:26 -06:00
sam4l_gpio.h More trailing whilespace removal 2014-04-13 16:22:22 -06:00
sam4l_periphclks.c Fix typo cloned to many files: SAM32 vs SAM34 2014-02-12 13:00:24 -06:00
sam4l_periphclks.h Add peripheral configuration logic for the SAM3X/3A; Change all references to SAM3/4 SPI to SPI0 for compatibity with the SAM3X/3A which has SPI0 and SPI1; Add directory which will eventually holdl an Arduino Due port 2013-06-26 18:46:44 -06:00
sam4s_gpio.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam4s_periphclks.h SAM3/4: Add missing SPI0 clock configuartion macro for the SAM4S 2014-11-16 06:43:08 -06:00
sam_aes.c Move crypto header files from include/crypto to include/nuttx/crypto 2014-07-03 18:35:08 -06:00
sam_aes.h Correct authorship on a few files 2014-07-03 18:28:26 -06:00
sam_allocateheap.c Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
sam_clockconfig.c SAM4CM: Fixes from Macs N 2014-06-27 12:27:02 -06:00
sam_clockconfig.h Move SAM4L peripheral clock logic to a separate file 2013-06-05 18:48:30 -06:00
sam_cmcc.c SAM4E CMCC: Fix some errors introducted in last check-in 2014-03-26 16:32:16 -06:00
sam_cmcc.h SAM4E-EK: Add an EMAC driver. Initial commit is just a quick port of the SAMA5D3 EMAC driver 2014-03-12 15:03:59 -06:00
sam_dmac.c Replace os_internal.h with sched/sched.h in files that actually reference something in sched.h 2014-08-08 17:53:55 -06:00
sam_dmac.h SAM3/4: Fix debug logic in DMAC that was causing the loss of interrupts 2014-03-14 11:57:42 -06:00
sam_emac.c SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing. 2015-02-10 11:10:55 -06:00
sam_emac.h SAM4E-EK: Add support for PHY insterrupt 2014-10-24 12:28:57 -06:00
sam_gpio.c Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam_gpio.h SAM3/4: Fix conditional compilation in GPIO IRQ logic 2014-10-24 10:44:43 -06:00
sam_gpioirq.c Another fix to SAM3/4 GPIO IRQ issue 2014-10-24 10:55:52 -06:00
sam_hsmci.c wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
sam_hsmci.h Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00
sam_irq.c Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures 2014-08-08 18:39:28 -06:00
sam_lowputc.c Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam_lowputc.h Rename sam3u/ architecture directories to sam34/ to include the SAM4L 2013-06-02 13:57:22 -06:00
sam_mpuinit.c Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
sam_mpuinit.h Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
sam_periphclks.h Add support for the SAM4CM. From Max Neklyudov 2014-06-25 08:25:52 -06:00
sam_rtc.c RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
sam_rtc.h RTC: Remove all backdoor interfaces from rtc.h 2015-02-13 08:41:34 -06:00
sam_rtt.c Only SAM4 family has RTTDIS bit in the MR register. SourceForge bug #33 from Fabien Comte 2014-09-17 07:42:12 -06:00
sam_rtt.h Add SAM3/4 RTT driver. From Bob Doiron 2014-05-05 14:35:37 -06:00
sam_serial.c Costmetic changes -- spacing, comments. 2014-10-30 16:33:40 -06:00
sam_spi.c wdog.h does not contain any application interface, only internal OS interface. Further, it is non-standard. Move wdog.h from include/ to include/nuttx. For the same reason, move the description of the watchdog timer interfaces from the Users Guide to the Porting Guide. 2014-08-21 11:16:55 -06:00
sam_spi.h Backport SPI driver enhancements from SAMA5 to SAM3/4 2014-03-13 10:34:35 -06:00
sam_start.c Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
sam_tc.c Tiva Timer: Timer test must attach a timer handler or the timer is stopped at the first interrupt 2015-01-13 15:55:54 -06:00
sam_tc.h Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00
sam_timerisr.c Move clock functions from sched/ to sched/clock 2014-08-08 14:43:02 -06:00
sam_udp.c Rename kmalloc to kmm_malloc for consistency 2014-08-31 17:26:36 -06:00
sam_udp.h SAM4E: Add USB full speed device (UDP) driver 2014-03-17 12:37:55 -06:00
sam_userspace.c Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
sam_userspace.h Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
sam_vectors.S Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
sam_wdt.c SAM3X/Arduino Due: Fix typo in sam3x_periphclks.h; add SCLK definitions to board.h header file. From Fabien Comte 2014-09-08 06:14:59 -06:00
sam_wdt.h Fix Bob's name in as many places as possible; Make sure that Bob is an author in as many files as I can think of (might be missing a few) 2014-04-22 13:42:38 -06:00