nuttx

2015-09-11 18:03:40 -06:00

chip.h

LPC31 and SAMA5Dx EHCI drivers: Fix cache related problem. All buffers are now aligned with the cache line size in both starting address and in length. This cause major problems in unlucky builds where the USB host buffers where unaligned and abbutting other data. The cache flush and invalidate operations could be subverted by acceses to adjacent data or could have unexpected side effects. This bug has been in the ECHI drivers forever, but was only revealed due to unlucky memory allocations during the integration of the hub feature.

2015-05-03 13:20:15 -06:00

Kconfig

SAMA5D2: Add Flexcom UART serial driver

2015-09-11 14:30:19 -06:00

Make.defs

SAMA5D2: Add Flexcom UART serial driver

2015-09-11 14:30:19 -06:00

sam_adc.c

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.

2015-09-01 13:47:06 -04:00

sam_adc.h

…

sam_allocateheap.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_boot.c

SAMA5D2: Update boot logic, AXIMX, SFR, and WDT register definition files for SAMA5D2

2015-09-09 10:00:29 -06:00

sam_can.c

All CAN drivers: Set the new error indication to zero in the CAN message report

2015-08-18 07:24:12 -06:00

sam_can.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_clockconfig.c

Eliminate a warning detected by nuttx/tools/testbuild.sh

2015-07-22 14:11:10 -06:00

sam_clockconfig.h

…

sam_config.h

SAMA5D2: Add Flexcom UART serial driver

2015-09-11 14:30:19 -06:00

sam_dbgu.c

…

sam_dbgu.h

…

sam_dmac.c

Fix some common typos

2015-08-16 10:59:10 -06:00

sam_dmac.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_ehci.c

Eliminate warnings

2015-09-08 10:20:41 -06:00

sam_emaca.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_emacb.c

SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing.

2015-02-10 11:10:55 -06:00

sam_ethernet.c

…

sam_ethernet.h

…

sam_flexcom_serial.c

SAMA5D2: Add Flexcom UART serial driver

2015-09-11 14:30:19 -06:00

sam_freerun.c

Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov

2015-05-26 08:09:10 -06:00

sam_freerun.h

…

sam_gf512.c

…

sam_gf1024.c

…

sam_gmac.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_hsmci_clkdiv.c

Remove executable flag from more .c and .h files

2015-04-09 08:20:57 -06:00

sam_hsmci.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_hsmci.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_irq.c

Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.

2015-02-09 16:12:11 -06:00

sam_irq.h

…

sam_isi.c

…

sam_isi.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_lcd.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_lcd.h

…

sam_lowputc.c

SAMA5D2: Add logic to enable Flexcom clocking and to configure Flexcom pins

2015-09-11 14:54:30 -06:00

sam_lowputc.h

…

sam_memories.c

…

sam_memories.h

…

sam_memorymap.c

Separate memory mapping tables for SAMA5D2, 3, and 4

2015-09-08 16:40:13 -06:00

sam_memorymap.h

Separate memory mapping tables for SAMA5D2, 3, and 4

2015-09-08 16:40:13 -06:00

sam_nand.c

…

sam_nand.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_ohci.c

SAMA5 OHCI: Fix errors introduced with blind changes to match changes to LPC17 OHCI. Fix some handling for the case where we get a falso alarm transfer completion after disconnection/cancellation

2015-05-15 09:02:17 -06:00

sam_oneshot.c

…

sam_oneshot.h

…

sam_pck.c

SAMA5D2: Add pin multiplexing definition file and other necessary changes for the SAMA5D2

2015-09-10 13:07:04 -06:00

sam_pck.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_periphclks.h

Separate memory mapping tables for SAMA5D2, 3, and 4

2015-09-08 16:40:13 -06:00

sam_pgalloc.c

…

sam_pgalloc.h

…

sam_pio.c

SAMA5: Fix support for varying number of PIO ports

2015-09-10 13:46:57 -06:00

sam_pio.h

SAMA5D2: Add pin multiplexing definition file and other necessary changes for the SAMA5D2

2015-09-10 13:07:04 -06:00

sam_pioirq.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_pmc.c

Remove executable flag from more .c and .h files

2015-04-09 08:20:57 -06:00

sam_pmc.h

…

sam_pmecc.c

…

sam_pmecc.h

…

sam_pwm.c

…

sam_pwm.h

…

sam_rtc.c

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.

2015-09-01 13:47:06 -04:00

sam_rtc.h

RTC: Remove all backdoor interfaces from rtc.h

2015-02-13 08:41:34 -06:00

sam_sckc.c

…

sam_sckc.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_serial.c

SAMA5D2: Add Flexcom UART serial driver

2015-09-11 14:30:19 -06:00

sam_serial.h

SAMA5D2: Add Flexcom UART serial driver

2015-09-11 14:30:19 -06:00

sam_serialinit.c

SAMA5D2: Add Flexcom UART serial driver

2015-09-11 14:30:19 -06:00

sam_spi.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_spi.h

…

sam_ssc.c

Two r's and only two r's in the word interrupt

2015-04-23 14:04:43 -06:00

sam_ssc.h

…

sam_tc.c

…

sam_tc.h

…

sam_tickless.c

…

sam_timerisr.c

…

sam_trng.c

…

sam_trng.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_tsd.c

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.

2015-09-01 13:47:06 -04:00

sam_tsd.h

…

sam_twi.c

Cosmetic: Move # of pre-processior command to column 1

2015-09-05 09:07:37 -06:00

sam_twi.h

…

sam_udphs.c

Eliminate warnings

2015-09-08 10:20:41 -06:00

sam_udphs.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_usbhost.c

SAMA5 OHCI: Implement asynchronous I/O needed for hub support

2015-05-02 09:38:08 -06:00

sam_usbhost.h

SAMA5 EHCI: Fix some compile issues when hub support is enabled

2015-05-02 14:00:12 -06:00

sam_wdt.c

More places where watchodg mispelled

2015-04-15 21:36:30 -06:00

sam_wdt.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_xdmac.c

Fix some common typos

2015-08-16 10:59:10 -06:00

sama5d2x_memorymap.c

SAMA5D2: Add pin multiplexing definition file and other necessary changes for the SAMA5D2

2015-09-10 13:07:04 -06:00

sama5d2x_periphclks.h

Add peripheral clock macros for the SAMA5D2

2015-09-01 13:08:48 -06:00

sama5d2x_pio.h

SAMA5D2: Add pin multiplexing definition file and other necessary changes for the SAMA5D2

2015-09-10 13:07:04 -06:00

sama5d3x4x_pio.h

SAMA5D2: Add pin multiplexing definition file and other necessary changes for the SAMA5D2

2015-09-10 13:07:04 -06:00

sama5d3x_memorymap.c

Separate memory mapping tables for SAMA5D2, 3, and 4

2015-09-08 16:40:13 -06:00

sama5d3x_periphclks.h

…

sama5d4x_memorymap.c

Separate memory mapping tables for SAMA5D2, 3, and 4

2015-09-08 16:40:13 -06:00

sama5d4x_periphclks.h

…