nuttx

Remove some crap from the SAMA5D2 memory map header file

2015-09-05 12:43:34 -06:00

chip.h

LPC31 and SAMA5Dx EHCI drivers: Fix cache related problem. All buffers are now aligned with the cache line size in both starting address and in length. This cause major problems in unlucky builds where the USB host buffers where unaligned and abbutting other data. The cache flush and invalidate operations could be subverted by acceses to adjacent data or could have unexpected side effects. This bug has been in the ECHI drivers forever, but was only revealed due to unlucky memory allocations during the integration of the hub feature.

2015-05-03 13:20:15 -06:00

Kconfig

SAMA5D Kconfig: SAMA5D2 has P310 L2 cache

2015-09-05 12:15:50 -06:00

Make.defs

Remove CONFIG_DEBUG_STACK. Adding CONFIG_STACK_COLORATION makes this configuration option pointless

2015-01-24 06:49:51 -06:00

sam_adc.c

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.

2015-09-01 13:47:06 -04:00

sam_adc.h

SAMA5D3x-EK: Add support for app/examples/adc

2013-10-24 15:39:56 -06:00

sam_allocateheap.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_boot.c

Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL

2014-08-29 14:47:22 -06:00

sam_can.c

All CAN drivers: Set the new error indication to zero in the CAN message report

2015-08-18 07:24:12 -06:00

sam_can.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_clockconfig.c

Eliminate a warning detected by nuttx/tools/testbuild.sh

2015-07-22 14:11:10 -06:00

sam_clockconfig.h

Move the un-definitions of __ramfuncs__ from the sam_clockconfig.c to the common up_internal.h header file so that the attribute will be applied the same to function definitions and prototypes.

2014-04-17 08:56:20 -06:00

sam_dbgu.c

Remove os_internal.h it has been replace by several new header files under sched/. There have been some sneak inclusion paths via os_internal.h, so expect a few compilation errors for some architectures

2014-08-08 18:39:28 -06:00

sam_dbgu.h

SAMA5: Add support for DBGU. Xplained board now uses DBGU for the serial console

2014-04-01 11:24:15 -06:00

sam_dmac.c

Fix some common typos

2015-08-16 10:59:10 -06:00

sam_dmac.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_ehci.c

EHCI: We not need disable and enable async scheduler when

2015-09-07 13:44:56 -06:00

sam_emaca.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_emacb.c

SAM4 Ethernet Driver: No supports operation using the high priority work queue so that packet processing can occur outside of interrupt level processing.

2015-02-10 11:10:55 -06:00

sam_ethernet.c

SAMA5D4: Add EMAC driver

2014-06-11 12:23:31 -06:00

sam_ethernet.h

In order to get PHY interrupts, they must be enabled at the PHY (still don't get PHY interrupts)

2014-08-17 13:03:18 -06:00

sam_freerun.c

Logic that samples the free running counter reads the pending interrupt status regsiter and can cause interrupts to be lost. So, if when the status regsiter is read, the logic must also handle the timer overflow event. Found and fixed by Max Neklyudov

2015-05-26 08:09:10 -06:00

sam_freerun.h

SAMA5 Tickless: Corrects some logic errors with timer/counter frequency

2014-08-10 19:04:18 -06:00

sam_gf512.c

More trailing whilespace removal

2014-04-13 16:22:22 -06:00

sam_gf1024.c

Fix a typo that was cloned to several SAMA5 and MTD files

2013-12-21 09:45:27 -06:00

sam_gmac.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_hsmci_clkdiv.c

Remove executable flag from more .c and .h files

2015-04-09 08:20:57 -06:00

sam_hsmci.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_hsmci.h

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_irq.c

Big, very risky change: Remove all occurrences of up_maskack_irq() that disable and enable interrupts with up_ack_irq() that only acknowledges the interrupts. This is only used in interrupt decoding logic. Also remove the logic that unconditionally re-enables interrupts with the interrupt exits. This interferes with the drivers ability to control the interrupt state. This is a necessary, sweeping, global change and unfortunately impossible to test.

2015-02-09 16:12:11 -06:00

sam_irq.h

…

sam_isi.c

SAMA5 PCK: Add support for the slow clock as the PCK clock source

2014-07-19 13:55:08 -06:00

sam_isi.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_lcd.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_lcd.h

Move include/nuttx/fb.h to include/nuttx/video/fb.h

2013-12-10 09:23:54 -06:00

sam_lowputc.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_lowputc.h

…

sam_memories.c

SAMA5D4-EK: In kernel build with address environment, need logic to map user virtual addresses to physical addresses, and vice versa

2014-09-07 19:25:30 -06:00

sam_memories.h

SAMA5D4-EK: In kernel build with address environment, need logic to map user virtual addresses to physical addresses, and vice versa

2014-09-07 19:25:30 -06:00

sam_nand.c

Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled

2014-07-26 18:47:33 -06:00

sam_nand.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_ohci.c

SAMA5 OHCI: Fix errors introduced with blind changes to match changes to LPC17 OHCI. Fix some handling for the case where we get a falso alarm transfer completion after disconnection/cancellation

2015-05-15 09:02:17 -06:00

sam_oneshot.c

Fix a computation error in the fix for the last computational error

2014-08-11 12:07:49 -06:00

sam_oneshot.h

SAMA5 Tickless: Corrects some logic errors with timer/counter frequency

2014-08-10 19:04:18 -06:00

sam_pck.c

SAMA5 PCK: Add Main clock as an option for the PCK clock source

2014-08-03 10:17:50 -06:00

sam_pck.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_periphclks.h

Add peripheral clock macros for the SAMA5D2

2015-09-01 13:08:48 -06:00

sam_pgalloc.c

Add a sharable version of arm_virtpgaddr()

2014-09-16 16:49:44 -06:00

sam_pgalloc.h

Add a sharable version of arm_virtpgaddr()

2014-09-16 16:49:44 -06:00

sam_pio.c

SAMA5D3X-EK: Add support for the WM8904 audio CODEC

2014-07-31 11:14:57 -06:00

sam_pio.h

SAM PIO: sam_pio.h needs to include chip/sam_memorymap.h in order to resolve some conditional logic properly

2015-05-01 13:41:28 -06:00

sam_pioirq.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_pmc.c

Remove executable flag from more .c and .h files

2015-04-09 08:20:57 -06:00

sam_pmc.h

SAMA5: Remove HSCMI-related functions that did not belong in sam_pmc.c and give them their own file

2014-03-30 08:00:59 -06:00

sam_pmecc.c

Fix a typo that was cloned to several SAMA5 and MTD files

2013-12-21 09:45:27 -06:00

sam_pmecc.h

Fix a typo that was cloned to several SAMA5 and MTD files

2013-12-21 09:45:27 -06:00

sam_pwm.c

SAMA5D4: Update PWM header file

2014-06-08 14:16:50 -06:00

sam_pwm.h

SAMA5 PWM: Driver now in build and configuration system

2013-11-06 12:24:51 -06:00

sam_rtc.c

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.

2015-09-01 13:47:06 -04:00

sam_rtc.h

RTC: Remove all backdoor interfaces from rtc.h

2015-02-13 08:41:34 -06:00

sam_sckc.c

SAMA5 WM8904: Fix errors in programmable clock output configuration

2014-08-01 15:18:58 -06:00

sam_sckc.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_serial.c

SAMA5 Serial: Reading IMR and disabling interrupt must be atomic

2015-04-08 15:27:31 -06:00

sam_serial.h

…

sam_spi.c

Make some file section headers more consistent with standard

2015-04-08 08:04:12 -06:00

sam_spi.h

Backport SPI driver enhancements from SAMA5 to SAM3/4

2014-03-13 10:34:35 -06:00

sam_ssc.c

Two r's and only two r's in the word interrupt

2015-04-23 14:04:43 -06:00

sam_ssc.h

SAMA5 SSC: Add framework (only) for a forthcoming SSC-based I2S driver

2013-11-07 12:26:53 -06:00

sam_tc.c

Correct time conversion, 1000000 not 1000 to convert seconds to microseconds.

2014-08-11 11:14:10 -06:00

sam_tc.h

Correct time conversion, 1000000 not 1000 to convert seconds to microseconds.

2014-08-11 11:14:10 -06:00

sam_tickless.c

Fix conditional compilation error

2014-08-12 10:00:58 -06:00

sam_timerisr.c

Rename up_timerinit() to up_timer_initailize(); Add prototypes for candidate interfaces for the tickless OS; Don't build existing timer initialization logic if CONFIG_SCHED_TICKLESS is defined.

2014-08-06 16:26:01 -06:00

sam_trng.c

More trailing whilespace removal

2014-04-13 16:22:22 -06:00

sam_trng.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_tsd.c

Correct #if to #ifdef when the macro can be undefined. Fix bug in AT32UC3 clock initialization: AVR32_CLOCK_PLL_OSC1 should be AVR32_CLOCK_PLL0_OSC1 and AVR32_CLOCK_PLL1_OSC1.

2015-09-01 13:47:06 -04:00

sam_tsd.h

SAMA5: ADC and touchscreen drivers now build without errors

2013-10-03 14:32:21 -06:00

sam_twi.c

Cosmetic: Move # of pre-processior command to column 1

2015-09-05 09:07:37 -06:00

sam_twi.h

SAMA5: Framework for a TWI driver (incomplete)

2013-09-11 12:28:52 -06:00

sam_udphs.c

Fix more common typos

2015-08-16 11:06:29 -06:00

sam_udphs.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_usbhost.c

SAMA5 OHCI: Implement asynchronous I/O needed for hub support

2015-05-02 09:38:08 -06:00

sam_usbhost.h

SAMA5 EHCI: Fix some compile issues when hub support is enabled

2015-05-02 14:00:12 -06:00

sam_wdt.c

More places where watchodg mispelled

2015-04-15 21:36:30 -06:00

sam_wdt.h

Clean up and review of header files for conformance to standards

2015-06-12 19:26:01 -06:00

sam_xdmac.c

Fix some common typos

2015-08-16 10:59:10 -06:00

sama5d2x_periphclks.h

Add peripheral clock macros for the SAMA5D2

2015-09-01 13:08:48 -06:00

sama5d3x_periphclks.h

SAMA5: Back out most of commit c37b5b7b97d0644743c04f2c3d9e2b7ef9f5d698. Things are going to have to be done differently

2014-06-09 12:16:16 -06:00

sama5d4x_periphclks.h

SAMA5D4: Fix peripheral clocking macros: AIC and L2CC are continuously clocked

2014-06-19 15:52:42 -06:00